11 361 modeli
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 15% infill for tray 5 top layers 8 top layers for tray 2-3 outer walls. Tree supports for tray, build plate only. Fuzzy skin enabled for…
Wydruk około 8,17 €–9,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Great center finder with a relatively tall fence and all corners have a relief. Works both on square and round stock. Print instructions Category: Parts Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two sliding labyrinths which have to be solved at once to free the screw. The main goal is to place the screw in the opposite side of the circular holes, since those are the escape from the maze. Print instructions I included the Front…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…
Wydruk około 7,24 €–8,85 € nettoWstępna wycena jednego wariantu
Tour eiffel d'environ 30cm en quatre pièces. Imprimé avec un pla gold de clorfabb en couche de 0.2mm Eiffel tower scaled to 30 cm and simply divided in four parts.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
I was looking for an adapter, but didn't find a perfect solution for my task. So i've ended up with this remix/ combination of these two items: https://www.thingiverse.com/thing:2122826 https://www.thingiverse.com/thing:62800 Thanks to…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
One of my hobbies is woodturning, and one tool that every woodturner needs is a good center finder. The Center Finder (Square/Round) by my fellow YouTube Maker, Marius Hornberger , is one of the best I have ever used. Unfortunately, the…
Wydruk około 3,37 €–4,12 € nettoWstępna wycena jednego wariantu
Remix of Squash ball feet for Prusa Mini. All brackets bolt into aluminum extrusions and support the electronic's box. Highlights: Massive Noise Reduction Improved Stability (Lifting the magnetic sheet won't tilt the printer) 6 Support…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
I found that there is well known idea to use squash ball for 3d printer feet for anti vibration. I made this model for my Prusa i3 mk3 by myself, so this is not really a remix but pretty much inspired by existing nice designs such as…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Silencing foot I designed for my Mk3S+ using the softest squash balls (double yellow dots) I was looking for something better than the original rubber pads supplied together with the printer and found the idea using soft squash balls…
Wydruk około 2,55 €–3,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been enjoying making nooks and places for my shrimp and fish to hang out in. Caves are a great addition and really expand the unused space of the substrate.
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
I wanted to speed up the print time and save some material so I made the hex holes bigger.
Wydruk około 6,47 €–7,91 € nettoWstępna wycena jednego wariantu
This is a huge STL. You can make it smaller by re-rendering the Openscad code with lower face numbers.
Wydruk około 7,51 €–9,18 € nettoWstępna wycena jednego wariantu
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A sushi shop aquarium decoration that your fish can hide in. There are pockets on the inside of the base that you can use to put small pebbles or aquarium substrate to sink it to the bottom. Printing Printed in 3 parts The base is printed…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
What makes it special The square shape is what sold me on this one: flat sides, clean lines, and a twist that keeps moving in your hands. It is a cool fidget toy, fun to use, and a unique design to print in place. I recommend printing it…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
🫧🪸🐚 Ahh… Bikini Bottom: Ze Home of Beloved Aquatic Cgeatures 🧽𓇼🐙 🐿 🦀 There are plenty of pineapples, moais and rocks under the sea—you can find those anywhere. But… have you been to the actual Bikini Bottom? Print this whimsical…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Remix to add a feet to add additional support to the Z-Axis mount. The original feet for the back right for the control box is still recommended as well due to the weight distribution. Print instructions Printed in PETG @ 0.2mm layer…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
This square trick box has a hidden latch mechanism. This remix of the original Twist Lock Trick Box (hexagon) uses a square base and cap. Just like the original, this can be customized with different topper designs. Any topper created for…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
First off, attribution: This is a remix of the laser bed corner inserts by morpha on thingiverse. Found here: https://www.thingiverse.com/thing:4857543 During my testing, I figured out the true 0,0 of the Snapmaker A350 (at least mine) is…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Introducing the upgraded version of the self-watering planter design! This remix takes the original square design from Mikolas Zuza and improves upon it with fixes to the problematic outer and inner parts. With its self-watering feature,…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Toolbox socket organizer for 1\4 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Bigfoot silhouette stake for potted plants Please feel free to support me; https://linktr.ee/Rm3dprintdesigns
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Universal square key that I use to open the boiler
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This a parametric assembly square to be sure you assembling your parts square. You can define your length, depth and height as you want. I needed them to keep two surfaces square during the assembly using pocket-holes. I printed two of…
Wydruk około 4,17 €–5,10 € nettoWstępna wycena jednego wariantu
Das ist eine Halterung für alle Swissphone s.QUAD Melder für den Nachttisch damit der Melder nicht herumliegt oder dauerhaft in der Ladestation steckt. This is a holder for all Swissphone s.QUAD pagers for the bedside table so that the…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The dovetails could use some optimization, but it works. They disable the need for supports when printing. I use 6 balls under my granite slab just to give some extra support in the back since I have my spool on the printer (and I had 2…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I present to you a 54x44 square cells, orthogonal maze. You have to start from center and the exit is at the bottom. The maze is a little bit hard to solve, but the time to solve it is worth it. The total maze size is 240x200x11mm. There…
Wydruk około 6,63 €–8,11 € nettoWstępna wycena jednego wariantu
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of square-shaped nuts, ranging in size from M2 to M22. Looking for Torx, Hex, or Phillips screws – with or without heads ? Or maybe hex-shaped…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Simple SKADIS peg board holder for a combination square. Printed at 0.2mm layers, 20% infill, no supports.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a pretty basic print of a soap saver based on the Wooden one available from Dr. Squatch. It helps to dry out your bar of soap and extend the life which is very noticeable. After using the soap saver I get 3-4 weeks out of a bar of…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
gabarit d'angle pour laser, positionnable facilement grâce a des aimants.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Size: The holes body: Length*Width=110*38 mm; Length*Width=70*20 mm; Easy install Click - NO Bolt, Nut, superglue!
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter collar is designed to allow the AutoAqua Smart Stir to accept the glass cuvettes that come with Hanna Checkers (Hanna Instruments HI731315).
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits 6 lids
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
I needed a container like the fish store uses that can hang on the side of my tank. This will be useful for acclimating new fish as well as a place to hold fish while performing certain tanks maintenance tasks.
Wydruk około 9,48 €–11,59 € nettoWstępna wycena jednego wariantu
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Loonie & Quater token for shopping carts
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Peacemaker is hot right now so Peacemaker logo! I initially designed this to be a coaster, but you can totally slap this on your chest, use a toilet seat as a helmet, and be a beacon of freedom! Designed to be printed at .20mm Yellow up…
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
The only Qnap key model on this site wasn't working for me. Dimensions were right, but my Qnap lock has a protrusion on the corner. Thus, I updated it to accommodate that protrusion. When printed using 0.4mm nozzle, the key looks like it…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Quad Fuel Processor - Remix! Armies rule on fuel. Within the great megalopolises, billions of vehicles crowd the thoroughfares as cargo is delivered, and humans, aliens, and worse are transported through the heavily polluted environment.…
Wydruk około 20,17 €–24,65 € nettoWstępna wycena jednego wariantu
These squashballfeets for the BambuLab A1 allows you to reduce the noise of your printer by dampening out vibrations. Print Settings Printer: Prusa MK4 Rafts: No Supports: Yes (The Dome for the Ball don't need Supports) Resolution: 0.15…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aquatic / Alien Head Bust. Its hollow so you can turn it into a lamp. Open section in back for wires or cord.
Wydruk około 14,92 €–18,24 € nettoWstępna wycena jednego wariantu
Printed in PLA at 0,15mm Supports of various sizes on the central axis to accommodate the plant's wedge
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This is a speed square I designed. It has measurement increments of ¼" with numbers every inch. It also has angle measurements every 15 degreed and labeled on one side. Edit: Model can be printed vertically for better clarity on numbers…
Wydruk około 5,27 €–6,44 € nettoWstępna wycena jednego wariantu
I made an enclosure for a 3D printer using 500mm long 2020 aluminum extruded profiles and 500mm square acrylic panels for a partition. Below is a comparison with the enclosure using IKEA's LACK.…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are two versions: vortex and bowl. When you drop many marbles into a bowl they may block each-other and get stuck in the bowl. Vortex has the least chances of self-blocking marbles, while maintaining a wide opening at the top. Bowl…
Wydruk około 2,40 €–2,93 € nettoWstępna wycena jednego wariantu
A connector to make a square equilateral pyramid out of straws. Uses the white part of the straw from boxed milk.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This is a replacement for the lower leg joined for a X-500 style quad drone. This part will work for https://amzn.to/41AV1Jv (500-X4 Carbon Fiber Quadcopter Frame Kit). It will fit any X-500 drone that uses 16mm (OD) down tube for leg and…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu
Now that the snow is practically gone & one can enjoy hiking through the woods or park again, wouldn't it be cool to have an old fashion way of telling the time where ever you go without having to rely on a distracting phone? To learn…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Zodiac constellation Aquarius keychain If you print it in one color, it looks good. If you print it in two colors and use a natural or translucent filament as a base, when you illuminate it or place it in front of a light source, it will…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Ein stapelbarer Wachteleihalter (12St.). Schnelle Druckzeit, keine Stützen und nur wenig Material nötig. A stackable quail egg holder (12). Fast print time, no supports and only little material needed. Verbesserungsvorschläge sind…
Wydruk około 2,44 €–2,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DJI RC-N1 mount adapter with QuadLock receiver. Use four M4x5 screws and M4x3 nuts to mount the two together. Print with PET-G, 0.2mm layer, 0.4mm nozzle, 50% infill. Use supports for the QuadLock receiver part - print it flat on the bed.…
Wydruk około 3,74 €–4,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Square Sorting Tray v3 & v4 (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ”, “ Octagon Sorting Tray (Vase…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a tool to provide a physical example of packing 17 1x1 unit squares into a 4.7x4.7 unit square. It was inspired by this twitter exchange, which I came across on imgur: The image used in that exchange was created by Erich Friedman…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Feel free to print or remix it
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
Squash ball damper which can be assembled without any tool. My Prusa got extremly silent after the assembly. ball diameter: 40mm
Wydruk około 1,65 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You maybe know the famous “ Putting a square Peg in a Round Hole ” from Apolo 13 mission. Here we'll simply try to turn a triangle into square and without any duct tape This dissection puzzle comes from the haberdasher's problem, created…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
A basic utility/gas/meter cupboard key with a square socket. Also used on some public bins. Has a decent thickness for the grip with a thinner section on one corner for easily putting on a keyring. Print with a decent number of perimeters…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple stand for the Jazwares Ahsoka Tano T-6 Jedi Shuttle from Micro Galaxy Squadron. It can support the shuttle in many different modes as the wing can rotate 360 degrees. If you use the gcode files, I used Hilbert Curve for…
Wydruk około 4,08 €–4,99 € nettoWstępna wycena jednego wariantu
This low profile AirTag holder mounts to the bottom of the Quad Lock out front phone mount using the holes meant for the go-pro adaptor. You will need to pick up two M3-0.5 x 6mm socket cap screws (I got a bag of 3 Everbilt branded ones…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This is a testprint for finding the best possible shine and surface quality for a filament. I found this to be especially important for silk filaments. Too small layers might not shine that well. The model can be used with temperature…
Wydruk około 2,78 €–3,40 € nettoWstępna wycena jednego wariantu
Updated to ver. 1.1 (recess on the rear side for the instrument is removed). For those who need a stand for squared shaped temperature and humidity meter. As I already designed a stand for a round meter I need one for a square-shaped too.…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
A fun little coin trap with an interesting geometric design on the outside and a perfect sphere on the inside. The internal sphere itself is large enough to accommodate a coin up to 35 mm in diameter. But the outer shapes will only allow…
Wydruk około 1,54 €–1,89 € nettoWstępna wycena jednego wariantu
Made to fit a 166mm square picture, push fit so didn't need any backing. Simple bevel and hole in back for nail. Can scale to fit any size you would need, I spray painted mine gold, but you could easily get away with the patterned…
Wydruk około 6,85 €–8,38 € nettoWstępna wycena jednego wariantu
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
This protective cover for set squares offers reliable protection against scratches and breakage. It ensures that your set square remains in excellent condition. Ideal for school or office, the cover shields your set square from everyday…
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
Can raise something with a square corner off of a surface. Like a desk riser. This project designed to lift a desktop PC 2cm off of a surface. Provided STL file is scaled for 20mm x 20mm corner and a 20mm lift. Provided gcode is a set of 4.
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
This “Geodreieck” is a common tool used in school K-12 and they are getting so expensive so that I just started 3D printing them. The result is a dual-color triangle with important markings being highlighted. HOW TO PRINT Download the…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
A Sator Square using the font carved into a wall in the medieval fortress town of Oppède-le-Vieux, France.
Wydruk około 7,18 €–8,77 € nettoWstępna wycena jednego wariantu
WHY?! I do a fair bit of massively complex functional prototyping. I used to have to draw a 3.10mm hole to fit a 2.90mm screw if I wanted my 14mm square hole to be 14.00mm. Now, I draw 2.90mm and get 2.85-2.95mm, and get my +/- 0.05mm…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Centering square gauge to find the center of a circle for drilling etc. > Print materiel used: Filament PM Black PetG. > Support: No support needed > Infill: 15% Gyroid. > Outer Perimeter: Set to 4 for strength
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Have fun Printing
Wydruk około 3,41 €–4,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As part of my artistic process, I create a lot of custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm making them downloadable. I like dot grids but I want to be able to erase any visible/unused…
Wydruk około 3,12 €–3,82 € nettoWstępna wycena jednego wariantu
Voronoi models are tricky to get printed, but I recommend using organic supports and increasing the top contact Z distance to at least 0.2 and the XY separation to 75%+ (under “Print Settings→Support Material→Options for support material…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena jednego wariantu
I made this box for my wife's quilting squares of various sizes. She was concerned she might misplace the smallest ones and wanted them all together. So, I took some measurements and modeled this box to hold them. To save on filament, the…
Wydruk około 3,10 €–3,79 € nettoWstępna wycena jednego wariantu
Malgré une surélévation de l'imprimante qui ne gène en rien, il se fixe a la place des supports d'origine. J'ai utilisé du TPU pour la partie haute avec un remplissage a 30% et PLA 50% pour l'autre partie. Vous pouvez remplacer le PLA par…
Wydruk około 4,67 €–5,71 € nettoWstępna wycena jednego wariantu
With its 8 mm central hole , it allows Asian hornets to enter while preventing them from escaping. Smaller surrounding holes ensure non-target insects can safely exit. Key Features: Selective Design: Avoids trapping non-target insects.…
Wydruk około 1,22 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aquanets are large and usualy use space which could be used better. With this simple hook, you can it sore where's used.
Wydruk około 1,49 €–1,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
During box or square breathing, you breathe in for the count of 4, hold for 4, breathe out for 4, hold for 4, repeat. This little tool is a tactile guide for centering your mind while you do the box breathing. Each side has a different…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Gedruckt mit Ender 3 V2 Nozzel: 210 Bed: 60 Speed: 50mm/s Infill: 40% Gyroid Material: Geetch PLA
Wydruk około 5,31 €–6,48 € nettoWstępna wycena jednego wariantu
Introducing the ultimate Drawing and Measuring set, perfect for students and professionals alike. It includes a ruler, a set square and a protractor, which has the essential trigonometry formulas written upon it. Note that, when measuring…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Square light switch compatible with Busch-Jaeger. Includes a snap-in frame and a rocker-style switch plate. Clean design, easy to mount, and fits standard Busch-Jaeger mechanisms.
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Aquarium air flow regulator for 7mm tube with M4 screw and exagonal nut.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Kulatá krabička pro rybářské háčky a jiné drobnosti. Round box for fishing hooks and other small items.
Wydruk około 3,16 €–3,86 € nettoWstępna wycena jednego wariantu
Printed in 45 degrees using PETG, support only in plate. You need a M5 hex Nut
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I saw here a quality gauge for vertical embossed text. But I needed also an engraved version to see the quality of the text when designing it in Fusion 360. Therefore I made one that is smaller and prints faster too. The smallest text…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
If you have ever wanted square hamburger patties, now is your chance!! Remember that PLA, PETG or many other of these plastics are not recommended for long term food applications . SO, print the Square Hamburger Press for your next cook…
Wydruk około 5,73 €–7,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
