Liczymy pasujące modele…
My son received the Quanum Vandal 1/10 4WD Electric Racing Buggy (RTR) for Christmas this year and we suffered our first crash within hours. The front suspension holders blew out on one side. After a few repair attempts we gave up and…
This is a front shock tower for the Hobby King Quanum Vandal. The part is hard to find outside of the Hobby King website and it was back ordered there so I just made my own. I figure I'll add more parts for the Vandal as my son breaks…
Simple customizable replacement for the Quanum Trifecta Frame GoPro camera holder, with included holder for a small 700TVL FPV camera. Print Settings Printer: Fabrikator Mini Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill:…
Remixed from LaForge V2 Fatshark Doors by musicsurf, to fit the Quanum hb5808 diversity. Make sure to check the pictures for printing orientation and support structure. The snapping hooks are modified, as the original design would not fit…
Edit - Added V2 with better support on the sides and slightly better fit to prevent the wheels from wiggling in place. Replacement wheel hubs for the main gear of the Ranger EX from voltanex. The original hubs are pretty soft and weak and…
Hallo! Hier wird ein Case für den FPV Diversity Empfänger HB5808 von Quanum angeboten. Es besteht aus mehreren Teilen da auch der Empfänger aus zwei Funkmodulen die über ein Kabel verbunden sind besteht.…
Quanum Overlord (6 way diversity receiver from HobbyKing) Antenna Mount. In case anyone breaks their antenna mount and needs a replacement. Good luck getting it from Hobby King. Recommend printing it out of PETG because it snaps in with…
Custom top plate to hold a small OLED display, my FPV video transmitter, a MinimOSD, a power supply and an LC Filter. I've included a small helper plate so the first layer is a flat plate to ease printing on rough surfaces. You can remove…
you've break the fragile quanum nova or cx-20 foot ? try this one: BOM : 5mm carbon rod. 4 x 120mm 2 x 220mm 1 x 200mm print pteg filament (1.2mm perimeter 25% infill): 1 x plate 4 x foot1 2x foot2 flex filament (1.2mm perimeter 50% 3d…
This is too mount your Quanum Diversity to any gopro mounts! Quanum RC540R 5.8GHz 40CH Race Band FPV Diversity Receiver Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20-25%…
here are all the things I designed and printed for my Quanum Neon250 so far. The Controller Case is for a CC3D. I don't know if a Naze32 will also fit. Everything is designed to be printed at 0.2 mm layer height and without support. I…
These brackets where used to mount the Quanum Axis Gimbal Upgrade (HALL effect sensor upgrade) into my Taranis. https://www.hobbyking.com/en_us/quanum-single-stick-3-axis-gimbal-upgrade-for-turnigy-9xr-9xrpro-tx-s.html Category: R/C…
printed in flex to avoid braking : 2mm tick and 50% infill for rigidity. Category: R/C Vehicles
Frame for a Quanum FC109 FPV cam to allow it to be mounted into a 30mm frame. Two M3 bolt holes. Category: R/C Vehicles
This is the Wing for the Quanum Vandal which fits on the modified Wing holder which you can find here: https://www.thingiverse.com/thing:4609717 Scale the logos in your slicer to fit into the wing. Which worked for me is the "Horizontal…
Protectors for the Vandal Aluminum Chassis Plate (Part No. 10930). Needs to be glued to the chassis after press-fitting (carefully with a hammer if needed). I glued also some velcro to the protectors and canopy to stabilize it. Had to…
Designed this from scratch in Tinkercad. Print it horizontally for strength. When assembling, push the metal ball head from the front into the printed pin and then fasten the screw. Print Settings Printer: Sidewinder X1 Rafts: Yes…
Quanum RC216R / RC540R tripod mount not sure if it fits others then my tripod, but i though i upload it anyway Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: 0.2 Infill: 15%…
Purchased a LRP Blast 2 Canopy and Wing from ebay and adapted both to my Quanum Vandal. Mount Holes from the Blast Wing are wider compared to the Vandal. Blast Wing is also thinner, so cut off a few Millimeter from the mounting Pin. Print…
As the LRP Blast Canopy is slightly bigger compared to the original Quanum Vandal canopy, I had to lift it up a few millimeter with these adapters. Print flat on the side for strength. Should also fit on : VRX Spirit FTX Vantage INTEGY…
I've designed my own custom longer rear landing leg to fit my printer (maximum size of 8cm) and still be as long as possible. As you can see, I like to add a small piece of heat shrink tubing to avoid scratching any surfaces my copter is…
Simple FPV frame for the Xiaomi Yi action camera to fit the Quanum Trifecta tricopter frame. Can be customized easily to fit other cameras. Standard GoPro screw knobs will be too short for this frame to properly turn them by hand. I've…
I did a fresh design on this, but took the basic concept from kerst. For my eyes, I want the lens as far forward as possible, all the time. This holder does that, and prevents it from rotating. (I cut away just a bit of foam inside the…
Holds HMDVR so that it fits in the large side pocket on the Quanum V2 goggles. Category: R/C Vehicles
The dumb lens in my Quanum V2 Pro goggles always slid around and I was constantly adjusting it when really I just wanted the lens as close to my face as possible. Replaces foam inserts and holds lens in Quanum V2 at either extent…
This is an adaptor to mount a glass lens in the Quanum V2 goggles. The Fresnel Lens they come with is complete garbage. It is truly much, much better with this upgrade, I promise. You can get the glass lens on harbor freight for a few…
This is a front camera mount for the Quanum V2 FPV goggles. It will fit a standard 32mm X 32mm camera and it snaps in the mount holds on the back of the LCD. It Require no zip-tie, but will need 4 pcs 2mm self taping screws (mine came…
