Liczymy pasujące modele…
It is designed for gravity drop of the batteries when taking one from the bottom. Dimmensions are: 120x91x230.33mm (LxWxH) It is for organizing AA (x16) and AAA (x24). Language is spanish tough. on the back, it has a space designed to…
Ce support de vide-poche est spécialement conçu pour s'adapter parfaitement à la Volkswagen Golf 8, au-dessus de la zone de recharge à induction. Il permet de ranger facilement vos petits objets du quotidien, tels que clés, porte-monnaie,…
This small solar system setup allows for the recharging of a 3.7V 500mAH lithium battery. During the day the LDR (photoresistor) has low resistance, pulling the transistor base low—keeping it off. In darkness, the LDR’s resistance…
EDIT: Based on user feedback, I added a version with more tolerances on the hinges. Video on Vimeo: https://vimeo.com/687168699 A battery case for either 4x AAA (+1 AA) or 4x AA batteries! The case has a hinge on the back so the material…
ARC Raiders Shield Recharger - Assembly Guide Listen up, Raider—getting vaporized by ARC drones because your shields are down is embarrassing, so print this recharger and stay in the fight! Instructions Print all parts using your…
This is a mount for a rechargeable USB LED light bar on the Prusa Mini+, remixed from the Prusa Mini LED Light Bar by jagr200. I used the same mounting bracket portion & location (top of Z-axis extrusion), but since I only had a…
A portable USB rechargeable lamp! My first proper foray into 3d design, incorporating simple circuits, threads and tight tolerance fits. Made this with a few criteria in mind: -Easy to assemble -Use easily accessible parts -Easy to print…
It's a stand for displaying. Here is the file of Arc Raiders Shield Recharger ( Made of Magic Make)
The original model just hold around 6 AA battery, but I have around 10 rechargeable AA battery. So I make it taller and mark with “Used” and “Full” for batter battery management.
📖 Instructions 📦 Bottango Project files 💾 Bottango Driver Parts used: ESP32 WROOM 32D ESP32 Expansion Board 30P DEVKIT V1 OLED 1,5 Zoll Display 128x128 Pixel SH1107 FM5324GA (Battery management, still testing, maybe not final) Lithium Ion…
🎮 Rechargeable Xbox Battery Cover STL Model 🎉 Elevate your gaming experience with the Rechargeable Xbox Battery Cover STL model, available exclusively on Printables.com! 🎉 🔋 Never worry about running out of power again with this…
Model from: https://www.thingiverse.com/thing:1720957 This is a battery pack cover for Xbox One elite controllers. It was designed to be compatible with the Energizer Charging System. The charge can be found here:…
这是一个极简的旋转展示台，可调速可充电，您可以使用它来旋转您的 3d 零件以增强观看效果或者用来拍摄。 Remix from https://www.thingiverse.com/thing:5213801 设计原则是以最低成本来实现这个展示台，你需要这些东西： 硬件部分： 1-所有需要打印的.STL文件 2-N20减速电机一个 3-带micro usb充电头的2000mah 7.4V锂电池（可替换成其他3-12v以内的锂电池） 4-四个608zz滚珠轴承…
Oral-B rechargeable toothbrush holder. Designed to hold: -1 Charging Base -3 Brush Heads -3 electric toothbrushes -Tube Of Toothpaste Also available on MakersWorld: Oral-B Rechargeable Toothbrush Holder x3 Remixed by rafez - MakerWorld
Simple petit entonnoir idéal pour recharger les emballages souples de sucre, en utilisant du sucre en paquet, bien moins cher. Simple little funnel ideal for refilling sugar squeeze packs, using much cheaper packaged sugar. Ender 3 / PETG…
Here's a remix of Ottodiy bot v13, called Otto 9V, I have used this Otto robot for teaching in my after school STEM/STEAM classes. This Otto 9V has been modified with a slide on Lego top or hat on top of Otto head. The body has a slot for…
A 2x2x1 gridfinity module that holds 8 AA and 8 AAA rechargeable batteries with a compartment to store the splitter that comes with many different models such as the SMARTOOOLS USB-C ones in the image. The hinge is just a length of unused…
Having already purchased a "moon lamp circuit", I remixed the screw cap from the original "Progressive Detail Moon Lamp with Rechargeable Moon station by moononournation to accommodate its 10mm diameter barrel around the power input. I…
This is a battery powered, rechargeable, Raspberry pi based RCM payload for the Nintendo Switch. The enclosure is made so that it can be battery powered and recharged with a built in USB micro b port. The payload can be injected into the…
Intro: I got tired of replacing AAA batteries in this train. Also, the voltage of AAA batteries seemed to drop off pretty quickly and the train would start getting slow. Overview Video: BOM: 18650 Cell I salvaged mine from a laptop, which…
Update: The model is a tad short it hits the hop up mechanism piece as it slides. So I have updated it.
In an effort to de-clutter my workbench, this charging stand and bit organizer was created for a Skil Model SD561201 electric screwdriver. There are two components a Base and a Lid. The tray in the Base is intended to hold weights to add…
This is the insert only, for rechargeable batteries. Refer to the original model for printing the box.
Added "Rechargeable" embossed text
This is a custom case designed for the Flipper Zero. It is powered by two 18650 batteries and is able to recharge the flipper 5 times before the case needs to be recharged. It also has slots for a temperature/humidity sensor, and ESP WiFi…
You need : 4x bolt M3x8mm 4x insert nut M3 4x magnet 6x3mm
This easy Arc Reactor prop only requires a 2.55" (65 mm) outer-diameter LED ring, an Arduino (clone), a switch, a small LiPo battery, and a LiPo charging module. This one was hastily thrown together before last Halloween. It's not too…
Battery trays for 16 Shure wireless rechargeable batteries. Blank model as well as 'Charged' and 'Dead' labels.
I kept losing track of which of my rechargeable batteries were dead and which ones were freshly charged. Threw together a simple organizer with printable icons, can be printed with minimal supports. Print the icons at 100% scale for a…
I decided to create my own rechargeable electric screwdriver as I did not like the existing models on the internet or in stores. This one features a battery protection circuit, sliding actuator, a 4.4Wh battery, and a 1:200 reductor…
XBox battery cover ricaricabile v.2 new logo and thinner profile fits better
I made my first version of these holders a few years ago for my camera batteries, and I really liked that I could see what is charged at a glance. Just keep charged ones with the contacts down, and drained ones flipped the other way. I…
Batteries not included. Dont forget to add bed support
I just adapted the candles a little bit so my rechargeable tea candles from Amazon (…
Features A sleek, adjustable LED desk lamp based on Volan's LED lamp design , powered by a rechargeable Lithium-ion 18650 battery Ideal for hobbies or working on fiddly electronics Gets 3 hours of battery life from a 3000mAh cell…
1 Wemos D1 Mini 1 0.96 inch 2-color i2c OLED display 1 Mini Boat Rocker Switch 3 Tactile Push Button Switch 6x6xH=7 1 lithium ion battery 1 5V USB 3.7V Lithium Li-ion 18650 Battery Charger Charging Module DIY Power Bank software:…
This object was made in TinkerCad. Edit it online https://www.tinkercad.com/things/aq3pLfmAUIU Made to hold: -2 Charging Bases and One Spare Brush -3 Brush Heads, -Tube Of Toothpaste Supports: No
For different sizes of rechargeable batteries/accumulators. As the rechargeable ones are a little bit bigger than the non-rechargeable ones, I created this for my batteries: Fits the following: 6x18650 5x21700 4x 9V 4x Petzl Core 25xAAA…
A warning first: This project involves using lithium ion pouch cells, which is one of the most dangerous types of batteries available. They are easy to physically damage with anything sharp or pointy. If the bag is pierced it will most…
Bicycle Cupholder W/ Detachable Bluetooth Speaker Designed to fit Yeti style cup or larger drinking bottle. Bluetooth speaker can be detached with perforated lock-ring to re-charge or to carry on the go. Perforated lock-ring allows sound…
This is a replacement battery holder for the portable Yamaha THR line of amplifiers, that is the THR5 and THR10. This holder was designed especially for my THR10C but should replace the 8xAA battery holder of any amplifier in the THR…
ENGLISH -------------- I wanted to make this electronic load autonomous, rechargeable, more practical to use and equipped with a small box to store the accessories. I also wanted to be able to move it easily and store it vertically to…
I didn't bother to include the line-up grooves that join the mating surfaces on the original part for ease of printability in the orientation I chose. (Laying flat on mating surfaces.) I used PETG and all went well, though others may be…
Since I hate to throw away tools that generally work but could do with some enhancement, I've converted an old Bosch NiCd battery drill to use Li-Ion batteries. I found different models for the battery case that all had some issues and…
This is a pretty straightforward 2x6 Gridfinity bin for storing the Hardell 6" calipers. The only downside to this model is that you can't stack more bins on top of it. However, I'm including the original CAD file in case anyone happens…
A cube for 4 lithophanes (93mm x93mm x2.5-3mm or 100mm x 100mm x 3-3.5mm) - a few other standard dimensions will follow soon) Powered by electronics and a battery donated from a cheap powerbank. With this it can be used with the battery,…
This mount can be used screwed to the wall or on a desk. The base of the light is magnetic, so I designed the model to accept a ¼" flat washer in the base that is a tight friction fit or can be secured with CA glue. The light is secure…
Enter short summary about the model
AAA battery dispensers for rechargeable battery. One marked "Full" the other marked "Used". Text can be painted or
Perfect for stashing just enough juice when the grid goes silent and the troublemakers are lurking in the shadows. This model is scaled to the Rust base diorama model.
This mount has room for two pins, that will charge the nexus when you put it in the mount. You will need: An usb cable A small peace of conductive metal, like a nail or similar. Preferably cobber. Iron will do. Sodering equipment Wire…
This has overpriced parts and is overkill for the purpose, but hey it should last a long time. A few notes. The motor rotates at ~1 rpm which is the ideal speed for a 20+ inch disco ball. The batteries last about 25 hrs of active usage…
Battery case for surefire 18650 with onboard recharging. Normal 18650 will fit with space on the end. O-ring AS658-019 1/16" x 3/4" (Same O-ring as P6 tail). Case was designed to minimize size/diameter. Wall is thin in threaded area.…
I designed this quick holder for 2430 lithium cells which power my Zigbee wall switches, so I had somewhere compact and handy to store them, while also remembering which ones are charged and discharged. I've included the Fusion 360…
Adapter for the Shelly H&T allowing use rechargeable AA LiFePo4 instead of a CR123 battery. It uses poka-joke to prevent wrong connection of the battery or Shelly sensor. You do not need solder. I used the jeweler copper wire and battery…
Holder for up to two refills for the Thermacell Rechargable Repeller models. Keeps refills upright. Make sure to print with openings facing up and no supports are needed. Print Settings Printer Brand: Creality Printer: Ender 3 Supports:…
A little organizer for rechargeable batteries. Two sides (charged/depleted) hold 4 AA batteries each (e.g. for 2 Xbox controllers). It clips to the side of my USM drawer so I don't have to dig for batteries in all the chaos. The scad file…
VESSEL Ballgrip Rechargeable Screwdriver Cordless No.220USB-1U and several bits Gridfinity base.
So I modified the base to add a 18650 battery and a charging module. I personalized it by adding the name Quitus which is my sister’s very first horse. Many thanks to bmyonatan for her work and sharing.
Non-rechargeable lighter case with hanger to be able to carry it hanging from the keys or to be able to find it quickly in the pocket. Funda para mechero no recargable con colgador para poder llevarlo colgado de las llaves o poder…
I made this model, first in years and my first design in Tinkercad. It allows the mounting of Coast CF1000R 1000L LED Rechargeable Flashlights that are currently sold in 3pks at costco. Design allows for the use of screws or zip ties.
Learn how to make your own cordless electric screwdriver in this step-by-step DIY tutorial. Perfect for home repairs, this rechargeable screwdriver is compact, powerful, and easy to build! Upgrade your toolbox with this custom-made…
Oral-B rechargeable toothbrush holder. Designed to hold: -1 Charging Base -3 Brush Heads -4 electric toothbrushes -Tube Of Toothpaste Also available on MakersWorld:…
Coffee press for Nespresso rechargeable capsules with spoon helper to remove coffee grounds from the capsule. Material: PETG, ABS/ASA, PLA 850/870. PLA is not recommended as the spoon will deform when touching the hot coffee grounds.
Find out everything you need to know about the lamp on my blog: https://nerd-corner.com/glare-free-lamp-and-powerbank/
ENG Nice gadget, if you want to use AA batteries instead of C batteries, you can use this adapter! Very useful with rechargeable AA batteries, instead of having C size. If you like it and you want to support my work, please donate here:…
Little extension of the really great battery organizer from Francis Beland
Bu DIY projede, şarjlı ve taşınabilir bir gravür motoru (mini Dremel alternatifi) tasarladık. Gövdeyi 3D baskı ile ürettik ve motor, batarya, şarj devresi gibi kolay bulunabilen elektronik parçaları kullandık. Yapım süreci sırasında…
Find out everything you need to know about the lamp on my blog: https://nerd-corner.com/glare-free-lamp-and-powerbank/
This is a bracket for hanging a Bosch PKP 3.6 rechargeable hot glue gun Mainly as i am certain that the usb charger will go walkies And it is set up for a UK plug which is better than the rest of the world Of course after making it i…
I needed a storage tray to organize my rechargeable batteries. This one holds 8 AAA, 12 AA and 2 9V batteries. A remix of my other model for holding lithium rechargeables
No special printing requirements.
Yet another battery holder, this one is meant for rechargeable batteries and comes in two versions. "Charged" and “not charged” are engraved into the back so you can tell which is which. Printing in green and red adds a visual cue!
This stocker can hold 12 AA (LR6) rechargeable batteries. Batteries that have been charged are stored from the top and taken out from the bottom for proper battery circulation. All parts do not need support. The lid can also be printed…
I made a rechargeable work light, dual rechargeable light and had parts left over so I made my own design light from leftovers. I have pictured most of the things needed to do this. five printed pieces. From blue light used items: 3 LED…
I made my first version of these holders a few years ago for my camera batteries, and I really liked that I could see what is charged at a glance. Just keep charged ones with the contacts down, and drained ones flipped the other way. I…
Charged batteries have the positive pole facing up, empty batteries have the negative pole facing up. With this you can know the state of the each battery.
Skil SD561201 Rechargable Screwdriver charging stand with 48 slots
Print it however you want. I printed mine in ASA with 4 walls on a 0.4mm nozzle and 0.2mm layer height. They're holding up well. If you're feeling fancy, you can blue the spring perch into place on the shock side, but they're held in…
Aucune des pièces fournies avec la recharge de gaz ne s'adapte à mon chalumeau de cuisine. Celle-ci fonctionne sans fuite. Imprimée en PETG
Holds this well reviewed rechargeable Hotfien air duster from Amazon in a 2x2 Gridfinity frame.
Printable without supports Real Measurements 18x630mm (2mm as space for the metal washer) You can glue the washer or use a screw (3,8mm screw hole) Feel free to edit the thicknes and height to you needs, *.f3d is included.
Je cherchai quelque chose pour remplir en sécurité ma mini boite de sel, mais je n'ai trouvé à la maison. Du coup j'ai dessiné sous Fusion360 ce petit entonnoir. J'ai imprimé cela en PETG. ==================== I was looking for something…
This is my first design and upload. This is a batterypowered lithophane box with a dimmer that I designed in Tinkercad. It is designed for a 100x100x3mm lithophane. For the frame I use treesupport. For the lid I use normal support. It is…
Car Cooler Rechargeable with F3D for customization The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time, you can do it via: https://www.paypal.com/paypalme/avicode…
Find out everything you need to know about the lamp on my blog: https://nerd-corner.com/glare-free-lamp-and-powerbank/
Base for PCB Christmas tree with Li Ion and TP4056.
Found this great little rechargeable fan on amazon, only problem was I needed it to sit a bit higher on the table to get the full affect of the breeze, so I created a handy little stand for it. If you have the same fan or want to buy one…
3.2V 32Ah Lifepo4 Rechargeable Battery - MODEL3.2V 32Ah Lifepo4 Rechargeable Battery - MODEL
Multi Filament Desiccant Tube for 2mm rechargeable beads 1mm diameter holes, more than 2000 holes in total
A headlamp holder built to be compatible with some 1W LEDs I had lying around at home and rechargeable lithium-polymer accumulators, so that there is no need to swap out one-use batteries which may be hard to find. The holder at the front…
Simple gridfinity 3x5 bin to securely place a Zanflare C4 battery charger. Design has channels to help air vent from the underside. Cutouts in the back for the plug and for the USB A connector. Please rate, post makes and like my models.
The holder is adaptive to use a 3mm screw for a small contact point or a metal band for a wider spring contact. For the band I used nickel strips used for spot welding battery packs. Any type of thin conductive metal wrapped around should…
这是一个极简的磁力搅拌台，可调速可充电，您可以使用它来搅拌各种液体。 设计原则是以最低成本来实现这个展示台，你需要这些东西： 硬件部分： 1-所有需要打印的.STL文件 2-从CDROM拆下来的小电机一个 3-带micro usb充电头的2000mah 7.4V锂电池（可替换成其他3-12v以内的锂电池） 4-PWM直流电机调速器1803BK 一个 ( https://m.tb.cn/h.fO5H4wx?tk=Mk1m2WgwUjy )…
redesigned insert with enlarged holes to accept rechargeable batteries which are slightly bigger
I recommend printing it in ABS for greater durability
…Marre de payer une fortune pour des filtres à charbon actif à mettre dans la fontaine à eau ? Voici le modèle qu'il vous faut ! ^^ → Démonstration en vidéo J'achète le charbon actif en sachet de 1 litre ( ici ). J'ai de quoi renouveler…
Holds six batteries for my Hero 10 and 12. Honestly, there are probably cooler GoPro battery holders on here, but I made this one for myself to fit in with my other rechargeable battery holders. I started using these for some camera…
A sunlgassesholder for the XC40 that can be glued underneath the engine start button with double sided tape. The holder should have one paticular place, where it fits quite nicely but it only really fits well in that position, i…
I like building led lamps, and so i decided to modify a 10w led floodlight to make it like a work light with a stand and all . there are 2 versions of the housing , one with premade holes and one with no hole , in case your lamp has…
