Liczymy pasujące modele…
This 90mm shoe is a display piece that I'm making as a gift for a little girl. It's meant to be printed in clear PVB filament and polished with alcohol in a vapor chamber. I provide two variants of the slipper, either of which will ensure…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
Plant grid in Voronoi style for Aquariums. Size ist 180 mm high, 80 mm wide.
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modell train rail buffer for scale H0 1:87. Works on Märklin C-Gleis. It should also work on ather main manufactured H0 rails, like Fleischmann, Piko, Roco Settings Value Infill 15% Perimeters 2 Layer Height 0.2 mm Material PETG (PLA)…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Esta es una réplica 3D de la estrella de mar que se volvió viral tras el stream en vivo del CONICET junto al Schmidt Ocean Institute , durante la expedición al Cañón de Mar del Plata , en el Mar Argentino. Apodada por internet como…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
The inner bracket ring of the lampshade measures 40mm, which should be compatible with most standard hanging E26 light bulb sockets. The lampshade measures roughly 150mm in diameter and 175mm tall. This should print perfectly without…
Wydruk około 10,37 €–12,68 € nettoWstępna wycena jednego wariantu
Description: Backpack attachable umbrella holder. Easy to attach your umbrella using a detachable part with a screw and nut. There is no need to unscrew it every time, as it can be detached from the rest of the holder. You can also use it…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
Easy print. The two halves must be glued together. I used KrazyGlue and it worked fine. A couple of skewers made the legs. No special settings needed; I used 10% infill but I think you can use whatever you want. I added the black details…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Bigger Trellis prints just under 2 Hrs. or smaller in 1.5 Hr printed trellis
Wydruk około 1,09 €–1,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recomand scale 77% x 77% x 70% 17.3.2022 - Release version 1.0 29.3.2022 - Updated version - bigger pipe and better stop
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sue wanted a hanging pot that would let her climbing plants climb. This design has three pieces and can be scaled for your printer / plants. The parts are designed to print without supports/rafts. The top ring and bottom pot have nine…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Half and full size pans for watercolours. They have the same size as Schminke pans.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mit diesem Adapter lässt sich ein Sonnenschirm mit geringerem Durchmesser in einen Schirmständer mit größerem Durchmesser einpassen. Ich habe den Adapter mit Prusament PETG im Draft Modus (0,3mm Layer Höhe) gedruckt und im Bereich wo sich…
Wydruk około 6,67 €–8,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed to fix my patio umbrella. Two of the arms broke after the wind knocked it over. Just needed to use some M5x35mm bolts with some washers and nuts. I used some nylon washers since it's supposed to be able to to articulate when…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shortened version of the bottom part of the original model from @TomekZimoch to fit on the Prusa Mini.
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My daughter ordered this nice Luggage Tag with the umbrella corp. from resident evil. I used PETG. Update: Added two new Versions: Japanese Umbrella Corp. : アンブレラ社 Original motion picture movie like logo: UMBRELLA CORPORATION You still…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Measure carefully and then give it a little leeway because reality. Printing in high quality is not necessary, as the vast majority of the print will not be visible.
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
Mario Vine Trellis for vining indoor plants.
Wydruk około 7,63 €–9,33 € nettoWstępna wycena jednego wariantu
.15mm/layer, 15% Infill, custom supports. I used black, white, red, light gold and blue PLA.
Wydruk około 11,55 €–14,12 € nettoWstępna wycena jednego wariantu
This is a sturdy replacement handle for an automatic umbrella. It is comprised of three separate pieces and was printed with PETG. A long 3mm screw is used to secure the handle through a hole in the umbrella's main rod. The Fusion 360 and…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is “3dCatNoob” creation from “Thinigverse”. I am using his design to create a trellis system for my garden. I did not make any adjustment to the design, just wanted bring it over to this platform. I printed the test print in PTEG but…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
un cortador grande para masa de galletas
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Full size pans for watercolours. They have the same size as White Night pans.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Logo Pinarello
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The screw of my nature et découverte umbrella was broken. I mais an other one.
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
This umbrella reducer will allow a smaller diameter umbrella pole to fit snugly in your patio table. It's designed for a patio table cutout of 2" (actual diameter 48mm), which fits an Ikea Äpplarö table. The umbrella cutout is sized for a…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motowidło - parasolka do przewijania włóczki. Montowana na stojaku od lampy do selfi (taki znalazłem w domu) Aby złożyć parasolkę potrzeba wydrukować elementy w odpowiedniej ilości. ramię - 24szt spinki - 60szt łącznik 1 i 2 - po 6 szt…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No supports, print with 0.10 mm.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Pro tisk je potřeba model rozříznout, nebo použít podpěry.
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: A device with hooks and a tray where objects can be placed, that is easy to attach to mounted parasols with a stand up to 39 mm, using a snap-on mechanism. Can be easily fixed in the desired position with 2 screws and, thanks to the…
Wydruk około 7,57 €–9,26 € nettoWstępna wycena jednego wariantu
Hello, gnomarell, the gnome watching construction works. Thanks for your download, enjoy the print.Hello,
Wydruk około 5,53 €–6,76 € nettoWstępna wycena jednego wariantu
Introducing the Umbrella-Shaped Car Scraper - The Ideal Winter Helper for Every Driver, Always at Hand! Effortlessly remove ice and snow from your car in style and efficiency with our umbrella-shaped scraper. This 3D printable tool is not…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Broche nudo infinito Estrella
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
Umbrella stand rain cap with inner diameter of 38mm It fits on an ALDI umbrella stand Regenschutzkappe für Sonnenschirmständer Innendurchmesser 38mm passt z.B. für ALDI Schirmständer No supports needed. I printed it in PLA
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
Náhradní kolíček k deštníku.
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Customizable Trellis with a central post for support and attachments Ever wanted something to hold up your plants? Don't have any plants? Me neither! Print Instructions and tips: All parts were designed to be printed without supports .…
Wydruk około 10,82 €–13,22 € nettoWstępna wycena jednego wariantu
Wind kept knocking my umbrella stand over, so I secured it with two clips. Should work for any thin sheet metal material
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple to assemble and play, challenging to master. In one-player mode, try to hang as many vines as possible without the trellis tipping over. In two-player mode, win by being the last to hang a vine without the trellis tipping over. The…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
On an old Weatherdefyer umbrella, I once got at a conference in Seattle the top cover got lost. This part replaces it and can be screwed on top of the umbrella with a M3 machine screw. I printed this with PETG since this is expected to be…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Corellian Food Processor : Andor : Starwars Narkina 5 Imperial Prison Complex food processor. Add your own feeding tubes. Cheers. Its hollow so Feel Free to cut a hole in the top and sprout some herbs.
Wydruk około 27,39 €–33,48 € nettoWstępna wycena jednego wariantu
Hi, this project consists of 3 files for separate printing. You can see the dimensions of the plant support in the graphic below. All 3 parts together gives you 375mm support + 100mm that goes in the ground. This plant support is modular,…
A Superellipse Kumiko-style pen holder designed for your workspace. It features 7 compartments for storage , efficiently organizing different stationery and tools. Dimensions : 95 x 95 x 95 mm The slanted design makes grabbing tools more…
Hi, I present you an improved version of my previous project! This support consists of 3 files for separate printing. You can see the dimensions of the plant support in the graphic below. All 3 parts together gives you 375mm support +…
Umbrella suspended in a rain shower artwork. It prints without supports and I used a brim to keep everything secure as I was printing fast. Be gentle when removing from the buildplate Print at 0.3mm layer height and if using Bambu Studio…
Plant supports in different sizes and shapes. Scale the models according to the size of your print bed or the size of your plants. The plant supports can also be cut from MDF or other materials with a laser cutter. (pdf for laser cutter)
This is a model of Cinderella's Castle from Disney World. This was originally made for the FlightGear open source flight simulator a while back. If you know where to find it and you try out FlightGear it should still be there. Scaled to…
Needed to hold up my plant as it was growing. Modeled this to be modular, can get bigger, wider, whatever. No supports are needed. Print the spikes vertically, unless you have a super sticky print surface, print them with wide brim.…
Plant support Print instructions support_1pc_base2pcs-honeycomb.3mf - need to glue after printing.
This is Minifigure of "Tomislaw Apoloniusz Curus Bachleda Farrell". A famous Kurvinox character from legendary "Kapitan Bomba" show made by Bartosz Walaszek. You have two ways of printing it: You can print it as parts and glue them…
Remix of Glass Slipper with a ribbon. Use super glue to attach ribbon to the slipper.
Printed with wooden PLA
I liked the idea behind this model , but wanted a more sturdy construction that did not involve glue (am not a patient man). So, with a bit of Fusion 360 work, here's this nice trellis that can grow as needed. No glue required, but pieces…
Stackable trellis for plants. Stack as many as you need on top of each other to make it taller. It was sized to fit an ender 3 build plate (220x220mm) diagonally. Scale up or down to whatever size you need or to fit your build plate. No…
I have designed an umbrella holder for the trunk. Two hooks are needed that hook into the Isofix holder in the trunk. I have printed them in TPU but it should work in any other material. I think it should work for any car with Isofix…
With this version, the planter has been upsized to 125mm (4.5") , making it suitable for a wider variety of plants. The form remains true to its design roots, elevated by a base inspired by traditional Japanese stone lanterns . The base…
I designed this hanger as a solution to the main problem with the beach umbrella. Thanks to the piece inside, you can use it on umbrellas of many sizes. You can change the size of the model for more different sizes. Print Settings…
Model originally published by Maxoume on Thingiverse. No changes have been made.
I remixed this very beautiful egyptian beetle by Peter Farrell with the aim that it could print flat without supports in FDM. I took the opportunity to smooth the 3d model a bit. You can find the original model here Follow me on Instagram…
I have also made a version for two umbrellas on request. I printed it out of PETG but other materials will also work.
A friend asked me to create a nice hexagonal trellis for their indoor plants to climb, so naturally I made a bunch of goofy designs! Nothing fancy, scale them as large as you want, or as large as your print bed allows. If you want to make…
Print on side. Will need small support for hook. Recommended to be printed in ASA or equivalent material. -Enjoy-
Description FORD FOCUS ST UMBRELLA HANGER I took inspiration from the model and modified the model allowing for a more secure fit and adding the ST logo for Fords! It all looks very nice and makes everything more racing! Print it and…
Here's four more Myconids / Myceloids / Mushroom Men / Fungi Friends for your D&D or Pathfinder games! Bases are not included, please print your own! 25.4mm (Medium) for the Adult, 20mm (Small) for the Sprout! These were originally paid…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
see wikipedia for definition: https://en.wikipedia.org/wiki/Umarell https://youtu.be/nd8dx7UIKFw A staring man, designed and sculpted by me in Blender No support needed, fearing poor adhesion? just add the brim. 15% infill is perfect, but…
Surely you noticed the hole in the center of the round garden table ? It's there for a reason! Meet two additions that will expand the capabilities of the table! Protect a covered table from rain or sun? Easy as pie! With an amazing…
LoZ Master Sword Plant Trellis 100% prints at approx. 7in tall, 0.2in thick. To create a larger (or smaller) trellis you can scale in the x-y while keeping the z-scale the same (as to avoid making it too thick or thin. No support or…
Little table with adapter 32mm other acessories soon….stay tuned Print Instruction, very easy: print it with PLA filament and without support print base and glasses together To assembly: Put the glasses into the base in the right way. I…
A very simple plant trellis to support the growth of your climbing green companions! It prints in three parts (all in same plate in the provided 3mf file), to maximize the size of the circles. Dead simple to assemble. The distance between…
I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.
A stackable plant trellis! Prints flat, then links together into “floors” of 3 or 4 (or more?). Stack as high as you care! Fully parameterized for Inventor users, or use one of the 4 basic sizes. STEP files included as well. STLs have…
This is my own printed version of the open origami umbrella. It can also be a fidget toy to play on your desk and a perfect test for a great first layer of your printer!!! Print instructions and Settings I include .stl , .3mf and .gcode…
The DP20 Frigate, also known as the Corellian Gunship, is a compact but heavily armed vessel - it carries 18 turrets of varying sizes. Being an old legends design, there are many different versions of this ship. This model is based on the…
Click here to see collection containing more gardening related designs by 3D Printing Bug. Enhance your plants with these stylish and functional 3D printable trellises ! Designed to support climbing plants and vines, these trellises add…
NEW VERSION HERE: Umbrella Corporation Tool Box Multicolor and Multipart with Flipped Logo (Recommended) Umbrella Corporation is a fictional pharmaceutical company that secretly created bioweapons and zombies. The Umbrella logo is…
Keep your stick umbrella within easy reach and your luggage compartment neatly organised. Designed for the back of the rear seat, this 3D-printable umbrella holder makes practical use of the available space. It keeps your umbrella…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You can use these clips in conjunction with a trellis string…
Umbrellas are the best way to stay dry on a rainy day, and their main downside is that one has to hold it. This model solves this by making your backpack hold your umbrella for you ! Also works with sticks or other long and thin objects…
This is a golf umbrella extension holder. Use it to raise the height of your umbrella on your golf push cart by approximately 6 inches. The model is based on the MGI Zip Navigator version from the manufacturer, but can be used in any golf…
Wile E Coyote holding an umbrella Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Dimensions: 35x35x3 mm Print time is more or less around 24m at 0.16 layer heigh (0.4 mm nozzle). Print time is more or less around 32m at 0.12 layer heigh (0.4 mm nozzle). Print parameters: Layer height - 0.16 mm or 0.12 mm Perimeters -…
SS Daniel J. Morrell was a 603-foot (184 m) Great Lakes freighter that broke up in a strong storm on Lake Huron on 29 November 1966, taking with her 28 of her 29 crewmen. The freighter was used to carry bulk cargoes such as iron ore but…
Umbrella Corporation Tool Box Multicolor and Multipart with Flipped Logo is a 3D printable model that lets you create your own tool box inspired by the Resident Evil franchise. It is a remix of the Tool box parametric model by Yanev ,…
Beach umbrella sand anchor Needed a sand anchor for my beach umbrella. Picture from the hot sand on a beach in Spain. Fits umbrella poles up to about 24mm (the hole is 25mm but I would expect some expansion in the printing process). How…
Designed that long time ago and tbh too lazy to go a photograph the printed product but for me it works with the fat stem beach umbrellas. Standard 0.4 nozzle mine is of ASA After several times being used still holds.
This is just a simple small plant trellis. There are two models, one with a bee and one without.
Es una estrella de Navidad para decorar la copa del árbol.
Simple clip to hang on a wire to support tomato plants, vine branches or any plants that need to be guided or supported Designed for an opening of approximately 15mm, this clip has a flattened side to be placed on the bed to avoid adding…
Tiles Leveler Spacers + clips Tool Kit - Kit per posa piastrelle --- files with Rev1 use slicer supports, other files cut off central supports --- Thickness: 1mm 1.5mm 2mm 2.5mm 3mm Resize to adjust dimension If you download/enjoyed this…
I am huge fan of Formula 1 and cars, so I decided to add my model "Formula Tyrell P34 1976 Kid Toy (stronger with function wheels, 1:24)" to the ongoing Toy Cars Prusa Contest. I took and remodeled two original models by rkxone and…
A modular charging smartphone stand for the IKEA LIVBOJ wireless charger pad. The phone can be held in both portrait and landscape orientation with the charging pad still placed in the middle of the phone. The cable runs in a slit in the…
Update: Second, smaller version uploaded! Both versions of the holder are printed in one piece each. The first version is 10 cm high on the print bed and has an inner diameter of at least 8 cm. When unfolded, the holder consisting of four…
Just a quick hanger/clip for grow tent poles (16mm, most common size). Works well for trellis support, and LST anchoring. Recommend adjusting print height and fill based on strength needs (whatever you're tying down / supporting) These…
With the last blue moon of the year passing, I designed a support trellis for indoor plants depicting the moon and its phases. Suitable for use to help support growing plants or ivy in any planter. Drew this up and imported as SVG into…
I wanted a Valentines themed plant trellis for some 4-6" houseplants and what better for life than a human heart! No supports, chunky layers and big nozzles print it fine too.
You can mod it to any other use, or to fit better in your car. Mine is Ford Kuga/Escape, but it is standardized interface, so it should fit in a lot of others. Just one note: slicer defaults to hiding the seam inside the hook, which is…
Dragon Ball 4 star sphere themed planter.Ideal for fans of the famous Japanese series. Includes: - Planter with carved stars (with/without drainage hole) - Stars for glue on the carved planter - Planter with embossed stars (with/without…
Stackable trellis for AeroGarden Bounty to add support for taller plants. The trellis is compatible with the trellis system that comes with the AeroGarden Bounty. The trellis frame needs to be printed in two parts, which can be clicked in…
Keep your beach essentials organized with our beach umbrella hanging hook. Perfect for towels, bags, and hats, this durable and portable hook attaches easily to any beach umbrella or tent pole. Enjoy a sand-free and clutter-free beach…
