Liczymy pasujące modele…
This is a mount for mounting a Reolink E1 (Pro) camera to the wall. The mount can be used up and down. The holes for mounting to the Reolink mounting bracket are 3mm, the ones for mounting the mount to the wall are 4mm. If you use 4mm…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
The original file is here , I provide Gcodes for Prusa: MK4 MK4S, MK4+MMU3 MK4S+MMU3. Core One Core One+MMU3 Reminder: if you're not using Gcode, before printing you have to go to: Print settings Layers and perimeters Perimeter generator…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
Fidget Infinity Cube v2 "OREO" edition for MINI+. Prusament PLA Vanilla White & Prusament PLA Prusa Galaxy Black. After the print the middle joints may be a little stiff. Move slowly up and down and soon it would be OK.
Wydruk około 2,81 €–3,44 € nettoWstępna wycena jednego wariantu
Wydruk około 11,16 €–13,64 € nettoWstępna wycena jednego wariantu
This is a 70 degree wedge for the Reolink POE Doorbell. It will work with the factory mounting plate. It may work with other doorbells as well. The inside could be cleaned up a bit but that won't be seen once mounted. Feel free to share,…
Wydruk około 4,08 €–4,99 € nettoWstępna wycena jednego wariantu
Bust of Louisiana Creole practitioner of Voodoo. Also included are Planter Versions. Note: Some of the files are for just the bust and some files are for the Planter version. Stunning. One of my favorites.
Wydruk około 12,48 €–15,26 € nettoWstępna wycena jednego wariantu
Rat gas anesthesia masks for stereotaxic surgery. Designed in Fusion 360 to replace an original part. Requires an M4 screw and a nut, and also a little bit of glue to hold the nut. I recommend printing the thicker version. Enable supports…
Wydruk około 1,25 €–1,52 € nettoWstępna wycena jednego wariantu
Core One Fish : The Coreoperca Not one of the lucky few that got this ugly fish for doing a review? Fear Not! I bring you the aptly named Coreperca an East Asia perch that prefer clear, slow-moving currents in the middle reaches of…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Nut aligment tool in package for INDX Founders edition isn't too handy for me. I made my own tool for easy find the position of screw in behind during assembly/disassembly of side panels. Note: to ensure that nut not fall down you must to…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a basic support with an angle of 22.5º for the Reolink E1 Pro camera
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reolink E1 Pro support with 34º angle. 2 versions depending the camera base version.
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
I am not sure if the ADXL345 sensor requires proper orientation to calibrate properly. The original orientation had the X axis pointing down the Y-axis. This now has the Y-Axis pointing down the Y-Axis.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Ford F250 double din 7" stereo bezel printed in PETG
Wydruk około 1,12 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The top cover for the INDX is well designed and works perfectly. However, the smooth, sloped sides provide little to hold onto when opening the top. This handle solves the problem and attaches using the same 2 screw holes used for…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Halter für eine Reolink E1 Zoom an einem Alufrofil von 40X40. Die Löcher bitte je nach Größe des Nutenstein selbst bohren. Und den Originalhalter von Reolink zur Befestigung benutzen.
Wydruk około 6,17 €–7,55 € nettoWstępna wycena jednego wariantu
This is a buildplate holder for 5 buildplates of the Prusa MK3 / MK3S / MK3S+ / MK4 / MK4S / CoreOne with an added handle for improved stability, and thanks to that it is also easier to move around. It fits perfectly to the Ikea lack…
Wydruk około 10,79 €–13,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple blank magnetic name plate for the top front of the Prusa Core One, just add your own text. It sits on the angled portion of the top frame yet maintains a vertical front for the name. Uses 1-3 10mm diameter, 2mm thick…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
A repair job to a hundred year old stereo viewer that had some missing parts. Here's a vid showing how the bracket is assembled: Except for the handle, all parts print without support. If you found this useful, it would bring me great joy…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
As I told you in summary I needed tool for car stereo removal. I printed pair from PETG but I'll choose PLA next time. It's little bit thicker than original from metal but I was able to push it inside of radio frame.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Habe hier einen Isopropanol Halter für den Core One gemacht. Da ich keine Spule rechts verbaut habe und eine MMU3 nutze brauche ich den Original Halter nicht. Hier eine alternative ;) Einfach 4x Ruthex M3 Einschmelzhülsen rein machen und…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
Makes work easier when I park my LOMO stereo microscope when doing smd repairs with different pcb height. This is because of the installed LED ring illuminator ring depth when I park the setup on the side of the bench while keeping the…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE UMBREON POKEMON KEYCHAIN Embrace the dark elegance of Pokémon with the 'Umbreon Pokémon Keyring'. This 3D model intricately captures Umbreon, the enigmatic Dark-type Eevee evolution, in…
Multicolor version of the Pokemon character, Flareon
I saw this model a while ago and printed it for someone; they loved it. This makes a great gift for young and old. The model is easy to print and the little bit of post print work is well worth it! Please hit the like ♥and post your make…
High poly version - https://social.thangs.com/m/220439 Category: Toy & Game Accessories
If you download the model, please don't forget to leave a like. Thank you! <3 Embrace the mystical allure of Umbreon with our smooth, flowing lines 3D print file. This elegant design depicts the sleek Pokémon in a series of graceful…
High Poly Version - https://social.thangs.com/m/217400 Category: Toys & Games
Original part : https://www.myminifactory.com/object/3d-print-vaporeon-pokemon-120325
AA Rear shell is here! USBC Rear shell is here! This model is designed specifically for the Funny Playing IPS screen mods. PRINTING: I have had successful prints with 0.4mm and 0.6mm nozzles at 0.2mm layer height with PLA, PETG, and ABS.…
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
I explored various models, but none met my angle and design standards. Therefore, I've created a new customizable design using Fusion 360 parameters. I designed this model keeping in mind the strength of the wedge and the space needed for…
Mounting hole template matches the paper one that comes with the doorbell and is an easy and quick print that is a bit more robust than the original one. I found that I needed a bit more spacing between the screw holes which are on the…
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
An Oreo-shaped fidget spinner — smooth, satisfying spin with a cookie you can actually recognize. Key features: shape styled as a stacked Oreo Spins smoothly with no bearing needed — the design handles it on its own Balanced for long…
This is the link to the model: https://makerworld.com/en/models/500008-super-twisty-oreo-spinner?from=search#profileId-414924 This is the description of the model: Description Twist this cookie the same way that you would twist an actual…
Big Eeveelution fan? Looking for the whole set of 9 models? Find the rest of them over on my Patreon ! Or Show your support by buying me a coffee ! So which eeveelution is your favorite? I personally think Jolteon, but that's just because…
The idea is to create an easily printable object but with the characteristics of an airplane able to take flight at high speeds if fired from a blowgun. The blowgun can also be easily printed, or you can use an existing tool and print the…
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
There is a free and paid version of this software 3D scanner. Since I released this free version of the program, I've put a lot of effort into creating version 2.0 of the scanner. It's only available in the paid version.…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Dark and stylish Umbreon keycap from the Eevee evolution…
Just a Reolink Doorbell Rain Cover. No Supports needed.
Tilts Reolink doorbell 30 degrees right or left and 15 degrees up or down. Left/Right is from the perspective of the camera. If you want the camera tilted up instead of down, choose the opposite left/right direction. Update: Added v2 to…
Update 2023-10-10 Made some sculpt, optimized the pose and made it more stable on table. A cute umbreon taking a nap. Pose inspired from my cat and here she is: Original model with armature deform has been posted on Sketchfab for remix: →…
Bonjour, Je vous propose mon modèle de protection contre la pluie pour la sonnette Reolink Doorbell. J'y ai ajouté un “antivol” en y ajoutant une vis M2x4 à la base de la protection. Contenu: Une plaque murale avec insert pour la…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Flareon-inspired keycap from the Eevee evolution line.…
After assembling Sam's very tidy MMU3 Community version, I decided to make a few slight modifications to save space on the width of the whole unit. The main modifications are: Buffer Cover: Reduced width by around 2mm. This saved some…
It's ideal for maintenance, filament changes, or simply checking on the printer's operation without having to remove the entire top panel. The custom-designed hinges are engineered to hold the door securely in both fully open and…
Low Poly Vaporeon model by r0ck3tman93 I printed with the following settings: 0.16mm layer height 3 walls 20% infill tree supports: placement everywhere 40° overhang angle bed temp 50° -0.1mm first layer horizontal expansion Give it a…
This model is featured in figure 3.12 of Visualizing Mathematics with 3D Printing . Video . Stereographic projection is a map from the sphere to the plane: Imagine straight lines going from the north pole of the sphere down onto the…
This is a remake of the Pikachu card stand. It is with the markings of Umbreon. It can be printed without supports. You could print it as a multicolored print, however it will take much longer than printing in one color and painting it…
Super simple and awesome looking. First Layer 0.24 Layer height 0.2
What you’re looking at is a mount that allows you to mount your Reolink RL36N NVR in a 19" RACK cabinet. It consists of two symmetrical elements. As for installation, the mounts are designed for the RL36N NVR, but I’m unsure if they’ll…
Alatreon from Monster Hunter: World All design and copyright belong to CAPCOM I uploaded this model while ago and took it down to upload the finished version but gave up when I found several people took it and sell it. Now that it has…
English: This corner mount is for Reolink TrackMix Wifi security camera. Besides the printed parts you need: 4 x Heated Inserts M4 4 x M4 screw (12-16mm long should work) the 4 screws and dowels that came with the camera + two additional,…
XY Clip For microphones with a diameter from 19 to 25 mm. The brackets are available in two different wall thicknesses. The easy-to-print clamp gives the correct setting for XY stereo recording (90 degrees). An adapter screw (3/8 inch to…
If you download the model, please don't forget to leave a like. Thank you! <3 Dive into the elegant world of Vaporeon with this low poly geometric 3D print. The design captures the aquatic Pokémon's graceful and fluid nature with sharp,…
ORTF Clip For microphones with a diameter from 19 to 25 mm. The brackets are available in two different wall thicknesses. The easy-to-print clamp gives the correct setting for ORTF stereo recording (110 degrees and 170 mm capsule…
Hi all! This is my make of Flareon in low poly! :D
Archmage item I did for my Patreon! Here's the footage of the full sculpting process! https://www.patreon.com/posts/morel-mushroom-45036979 For more videos and stuff like this support me on Patreon! Print Settings Printer Brand: Creality…
Here is another archmage item. This time is a raven on a skull! Hope you find it useful for your sceneries! You can find the stl attached to this post (Non-supported version, presupported version, presupported and hollow version)…
Needed some space between the Reolink Video Doorbell and the wall to hide extra ethernet cable. Use M4 screw + nut to fasten the metal holder to the spacer. Printed from PETG, with 25% infill. Fixed rain roof.
Geometric Umbreon Pokémon
If you download the model, please don't forget to leave a like. Thank you! <3 Ignite your collection with this low poly geometric 3D print of Flareon. The design vividly brings to life the fire-type Pokémon with angular, crisp lines,…
I split it into parts in F360 to make it printable without using AMS. I printed it out of PETG and Bambu PLA Glow Blue. Eyes, tongue painted (can be painted through AMS anyways) The glowing circles fit in the holes well without glue, but…
Brackets to mount the ReoLink NVR to a standard 19" Network Rack. They were modeled using the RLN8-410NVR. From what I can tell, this should work with the RLN16-410 as well. *NVR side screws will need to be changed to M3x10mm
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
Description This is a remix of ritchiedc's CORE One INDX Filament Sensor Top with PTFE Couplers , which itself is based on GavinOracle's original filament sensor top for feeding filament from a dry box. I added number markings on the 3D…
This is a wall mount for the Reolink E1 Pro and E1 Zoom that uses a french cleat to mount it to the wall. The mount was designed for the camera to be mounted upside down. There were some mounts already on here but I felt like trying…
-------------------------------------------------------------------------------------------------------- These are the current mounts: Horizontal: 5,10,15,20,25,30,35,40,45 Vertical: 5,10,15,20 Dual: 5 Vertical, 10 Horizontal Dual: 5…
A model of the Reolink E1 Pro camera ceiling mount that came in the box. I lost the original one that came with it so I did my best to model another. I don't know what other Reolink cameras this will work with but it was designed for the…
Replacement stereo surround of for the Land Rover Defender TD5. Print instructions Material: PETG Layer Height: 0.3mm Infil: 30% Perimeters: 4 Top Layers: 3 Bottom Laters: 3 Support: Yes
Here is my design for Reolink E1 Wall mount. No supports required. Assembly: You will need 2 M3x6 screws to attach with the plate included with the camera to the main body. Cover plate is a snap in design. Wall mount via 2-4 screws.…
This is an extended version of the original Prusa CoreOne+/CoreOne L spool holder. The stock holder fits only standard 1 kg spools, so I redesigned it to support wider filament spools used by many manufacturers. The model also includes a…
Carriage miniature I've made for my patrons at Patreon! Come join us on here! patreon.com/roleplayingminiatures By getting the annual plan you can request a custom miniature! Category: Games
These buckles can be used in multiple ways: Sarong/Pareo : Securely fasten your sarong as a dress or pareo as a skirt with ease. T-Shirt : Create a stylish cropped top effortlessly. Beach Towel : Wrap your towel securely around you,…
Designed to replace the weak original battery plug covers … :) Material: ASA/ABS
This part can be ordered printed here: https://www.justway.com/project/shareproject/Reolink_RLC_520_junction_box_4e106271.html 3 variants of a junction box for Reolink RLC-520 cameras. The camera has 3 cables coming out its back, which…
Length: 180mm. Six models in total. Two bar variants: 1. with 1/4-20 and 3/8-16 threads. 2. with bare holes for (1/4-20 and 3/8-16) brass inserts. Four screw variants: 1. Long screw with 3/8-16 thread. 2. Short screw with 3/8-16 thread.…
Due to the included adapter being only flat I've created a siding adaptor made for standard 4" vinyl siding. It keeps the sideway angle of that included spacer. There are two models included depending if you want to install the doorbell…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Obs: This mount was primarily designed to be used with my tilt, both for desk and wall mounting, which can be found at this link: https://www.printables.com/model/1073632-reolink-e1-mount-magnet-wall-and-table-mount I have Reolink…
Inner guard liners for the MJX 1/7 Citreon C3 Rally Car. UPDATES RE-TWEAKED FRONT GUARDS FOR NEW TYRE FROM ALIEXPRESS WHICH CAUSED RUBBING ON INNER WALLS ON FULL LOCK May look like an already available set on the market, but after seeing…
No summary Category: Games
Due to popular demand here is the Canonreo Caps! Still work in progress though. Recently got a 3D printer and came up with this idea after printing a bunch of fidget for the kids. Initially printed with raft with cookie side down but…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
I've made this model thanks to my supporting patrons! If you enjoy my work please consider supporting me on Patreon :) patreon.com/roleplayingminiatures Category: Games
If you place your Reolink E1 / E1 Pro / E1 Zoom Surveillance Cameras in a high position, you will not be able to see much of the room, especially if it is a small one. With this tilted base you will be able to make the camera frame more…
A friend of mine ask me to extend the cap of the Rain Cover designed by Zkaza.
General Info We have cameras that allow us to monitor our pond and our beehives, both of which are in a field with no suitable structures to mount a camera. This bracket was designed to accommodate both the camera mount as well as the…
Junction box for Reolink RLC 810A, 1212A etc.
Stand for Hover Mode Hot Wheels DeLoreon (https://smile.amazon.com/Hot-Wheels-Machine-Die-Cast-Vehicle/dp/B00Z3FACAK?sa-no-redirect=1). Made to look like the DeLoreon is taking off. Pegs sticking up will slide right behind the wheels into…
Removal tool for Clarion Car Radio. Its little thicker then original tool, but PLA is not strong enough to work with original thickness. I used it on my own stereo and it worked perfectly, it needs little bit force, but I did not damaged…
Here is another archmage item. Hope you find it useful for your sceneries! To support my work and get access to my miniatures please visit https://www.patreon.com/roleplayingminiatures Print Settings Printer Brand: Creality Printer: Ender…
This is a Hueforge STL of an Eevee/Flareon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a layer…
Grab your free pokepets today - Jolteon & Flareon - Vaporeon is also available ready for subscribers now Grab Flareon below & Jolteon also free exclusively on Makerworld here - https://makerworld.com/en/models/945722#profileId-912421…
I needed a tilted support. My camera is installed on the corner of my house's front wall. With this support, my camera now covers my house's front wall. I used 3x4x4 heat inserts for fixing the original support plate but you can also use…
