1408 modeli
I've made a couple of designs based on this idea before, but I realized that more segments = more fun, so now there's 35 😂 This design twists, expands, and collapses in a really neat way, and the segments can actually be separated and…
Wydruk około 7,22 €–8,83 € nettoWstępna wycena jednego wariantu
The clearances are designed for printing with a 0.4 mm nozzle and a 0.2 mm layer height. Print with 3 perimeters for proper strength in the joints.
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
This flexible starfish is an easy print that has been carefully designed to not make use of any bridging to provide for the articulated joints, and requires no supports or other special print options. Its size allows it to serve well as a…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Track your furry friend with ease using this collar/strap attachment designed to hold an Apple AirTag. The ergonomically rounded corners ensure that your pet won't experience any irritation, and the minimal profile prevents the attachment…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
X-wing Starfighter Scale 1:100
Wydruk około 6,92 €–8,46 € nettoWstępna wycena jednego wariantu
Simple and clean looking Starfield Xbox Controller Stand . Looks great in combination with the new Starfield edition Xbox Controller. fits 8x3mm anti slip rubber pads Printsettings: No raft Support Structures for best results where the…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
The name says it all. WARNING: The top and bottom part are NOT the same!! The model was designed to make all parts printable without supports, so it is not 100% accurate with how it looks in-game. I printed it @ 0.2 layer height. The top…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
An easy to print geometric starfish sand mold with no supports required. Print flat side down and scale up or down as desired. Example photos are printed with Prusament PETG Pistachio Green at 0.2mm with a 0.4 nozzle and 15% infill.
Wydruk około 1,68 €–2,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Creepy Garfield Meme.
Wydruk około 18,79 €–22,97 € nettoWstępna wycena jednego wariantu
Normally Id avoid uploading a design ive changed so much at all let alone as a remix but with the satin sheet, MK4 quality and decals I wanted to share it for other people to have the same success. Altered the design a little to look a…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Esta es una réplica 3D de la estrella de mar que se volvió viral tras el stream en vivo del CONICET junto al Schmidt Ocean Institute , durante la expedición al Cañón de Mar del Plata , en el Mar Argentino. Apodada por internet como…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
Easy to make a cute Starfish keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
A Pod of Dolphins Surfing.
Wydruk około 12,80 €–15,64 € nettoWstępna wycena jednego wariantu
This remix provides two different versions of the tessellation tile that have either a hole or a loop for turning the tessellation into an ornament. I love the model by @RobertSoto_503356, it is a real work of art. I previously remixed it…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
As I am a huge fan of Garfield I wanted to recreate the classic scene of Garfield resting in his bed with his beloved Pooky by his side. There are only a few “constants” throughout my life - Garfield is one of them, and I love him dearly.…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
This is bottom part for RFID chip for doors. Inside diameter 26mm. I printed with blue pla with 0,2mm and 210°C I also added obj file from fusion 360. I made this model for my cousin as part of my learning in fusion.
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
Display stand for the superb Lego X-Wing Starfighter 9493 https://amzn.to/40jhuvl . Displays model in lateral 10 degree tilt (customizable, left or right) Prints as is without supports No tools required Base size: 13 x 13 cm
Wydruk około 5,55 €–6,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Design wingspan is approx 980mm, longest section front to back is approx 220mm and chord at fuselage position is approx 30mm , Profile scales smaller toward wingtip while keeping generally same shape apart from some modification by the…
Wydruk około 17,76 €–21,71 € nettoWstępna wycena jednego wariantu
V1 ist in Anlehnung an die originale Backe mit zusäzlicher Zentrierung für z.B. runde Bauteile V2 ist besser für den 3D-Druck geeignet; die Rundungen wurden durch 45° Fasen ersetzt. (more print friendly)
Wydruk około 0,82 €–1,01 € nettoWstępna wycena jednego wariantu
I have found that the inside of my wetsuit boots struggle to dry without being propped open, which is difficult to do, especially when away. So, I quickly designed this! These are designed to go inside your wetsuit boots to keep them…
Wydruk około 3,10 €–3,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
RFID scanner/writer for PC/Mac - based on Raspberry Pi zero and RC522 RFID. A quality USB RFID code reader/writer costs over $220. This system costs less than $20. You will need: Raspberry Pi Zero (W) RFID-RC522 expansion module Pi Zero…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We kept losing our pen so I decided to design a pen holder for our fridge.
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
A RFID DROPLET CASE for your public car charging tag. I created this small case to encase my RFID charging ‘droplet’ tag. The opening for the keychain broke after a few weeks of usage, so I needed to fix this. This case is a simple print…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 8,43 €–10,30 € nettoWstępna wycena jednego wariantu
This is a replacement dispensing wheel for the Petlibro One RFID. It reduces the portion size to around half of the normal amount (probably a little bit less). I printed mine out of PLA but you could probably do whatever you want. The…
Wydruk około 3,87 €–4,73 € nettoWstępna wycena jednego wariantu
Karcher WD3 zajišťovací klíč navzduchový filtr / Karcher WD3 lock key airfilter Sliced for MK4
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My chopstick holder has the shape of a starfish. It combines decoration and functionality in one. A support structure is needed for the first layers. But the model can be pushed a little into the heating bed, then this is not required.…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
At some point in time, the Powerfix Wall mount pegboard changed the holes from squares to circles, and the square peg won't fit into the circular holes unless you trim the corners with side cutters. Since this isn't very elegant, I made…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Wydruk około 9,61 €–11,74 € nettoWstępna wycena jednego wariantu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu Skin…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
Baby Garfield pen/pencil holder. Add magnets and may be used for your fridge. Designed for MMU. Recommended settings: Layer height: 0.2 Mode: Speed Infill: 10% Material: PLA
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
If you're long enough into specialty coffee or tea and successfully climbed out of the rabbit hole of mixing the perfect brewing water yourself, you will eventually buy a more reliable water filter system than those table jug or pitcher…
Wydruk około 4,87 €–5,95 € nettoWstępna wycena jednego wariantu
I made this case for my metal wallet to ad an Airtag, and for protection against scratches and dents. The wallet I made this for had these dimensions: Width: 62.5 mm Length: 95.5 mm Depth: 9.10 mm Printed on my Ender 3 V2 with PLA+ with…
Wydruk około 2,44 €–2,99 € nettoWstępna wycena jednego wariantu
RFID car key signal blocker catch-all tray. Functions: Many cars these days use a “keyless-go” function to open/close the doors/trunk and to start the car without directly using the key of the car. This is very comfortable - but also very…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
UPDATE 02.03.2023 Da mir langweilig war habe ich den Luftdurchsatz verbessert indem ich oben noch einen 80mm “Pull”-Lüfter angebracht habe. Die Konstruktion ist etwas komplexer geworden da bei mir auf der Prusabox noch die Filamentboxen…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tested with PLA, PETG, ASA. On photos Prusa Orange print is ASA, black is Prusament PETG. ASA prints look better in my opinion. To assembly you need: M3 nuts (4 pieces) M3 distance (20mm) (m-f) (4 pieces) M3 distance (12mm) (m-f) (4…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since a pile of people seem to be making these I thought I'd update the design based on lessons learnt. This is to house Jan Heynen's design DIY GPS (links at bottom) Note, this is NOT waterproof, it relies on filling the case with…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a compact drying stand for a ResMed AirFit P10 for AirMini mask tube. Use two of them attached to each other (see model pictures) to prop up the end of the mask tube and let it drip dry. A design feature is that the two pieces…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small collectible for Starfield fans!
Wydruk około 0,54 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
starfish D1 2
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
it is used to attract fish by throwing it into the water, it will flow while reflecting light which creates flashes imitating an injured fish or other. It is mainly used to attract predators. It must be covered with aluminum or adhesive…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have no idea how that cube works, but it's already pre-assembled in 16 times the detail. Anyway… THIS MODEL IS FDM FRIENDLY AND REQUIRES NO SUPPORTS This toy is based on its appearance in Starfield. 2 Versions: Decorative onepiece & 2…
Wydruk około 3,99 €–4,87 € nettoWstępna wycena jednego wariantu
The RADPOWER Bikes Radster Road (and Radster Trail) model E-bikes use a small RFID card to lock/unlock their control panel. This small RFID card is smaller than a normal sized credit card and will not readily fit in a wallet's credit card…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Se imprime en dos partes: la Base y la Tapa. Una vez impresas se unen con pegamento. La antena encaja con poca presión en el soporte. NO requiere soportes. En la parte trasera de la base se coloca cinta doble faz para fijarla a la…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
A handy storage unit identifier for my Windsurfing gear closet.
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieses Modell ist ein selbst entwickelter Vorfilter‑Halter. Die Pumpe wird in das gedruckte Bauteil eingesetzt und anschließend gemeinsam mit dem Halter in einen kurzen Feinstrumpf gesteckt, der oben mit einem Band locker verschlossen…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed version with thicker hinges and less overhangs.
Dear friends, meet my new sea star — even more movable, even more beautiful. She bends and curls like she’s alive, no supports needed, joints strong as hell. Won’t leave anyone cold. Printed it in lavender and can’t stop fidgeting with…
Garfield, from an American comic strip, Garfield, created by Jim Davis. He is characterized as being lazy, obsessed with eating, has a love of coffee and lasagna, a disdain of Mondays and diets. Garfield is also shown to manipulate people…
Print it without any supports ! Please support my work by leaving a like and follow Get access to a lot of my models on my Patreon Don't Forget to Follow me on Category: Toy & Game Accessories
Introducing the Hexagon Superfidget V2: Upgraded to 45 segments with improved expanding and twisting action, and 3 sizes available! Print Tips: Especially for the full size fidget, watch your first layer carefully. I recommend slowing the…
I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…
MMU version of Garfield. Garfield, from an American comic strip, Garfield, created by Jim Davis. He is characterized as being lazy, obsessed with eating, has a love of coffee and lasagna, a disdain of Mondays and diets. Garfield is also…
Loved the version 3 and 7 posted by MediaMan3D. They do work well with the V-Spooler from Fryby Additive. https://makerworld.com/en/models/98832 and https://www.printables.com/model/684376 But I needed to adapt it to work with the…
Create a Naboo Starfighter! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks! Check out my other models.…
Experience the thrill of Imperial starfighter dominance with this meticulously detailed 3D printable TIE Interceptor model that brings the galaxy's most feared interceptor right to your desk. This stunning starfighter replica captures…
X-wing fighter Another model in the Star Wars Ships series . I enjoy modeling on this topic. This model has over 800 features in the model program. After several modifications and improvements, I successfully assembled it. A screen-used…
This is a digital 3D printable model of T-70 X-Wing Starfighter from the Star Wars Universe. The T-70 X-wing starfighter, also known as the T-70 X-wing fighter, was the successor to the T-65B X-wing starfighter, manufactured by…
UPDATE 09.01.2023: I created a stronger version for heavier tools and with an extension on the left to better handle forces from one side (for the extension on the right just mirror the model in your slicer). I have also included the…
A working recreation of the Starfield Chronograph watch case from the Bethesda game Starfield. its recreated to scale and with the best details I could do with the limited photos and info we have about it. some aspects of it may become…
As I am a huge fan of Garfield I wanted to recreate the classic scene of Garfield resting in his bed with his beloved Pooky by his side. There are only a few “constants” throughout my life - Garfield is one of them, and I love him dearly.…
Modeled these up, they take 3/8 rods down the center(I used a threaded rod left over from my printer build). Be sure to post a make! Category: Props
Printed at default 0.20mm 15% infill.
Easy to print, no supports ✅ hole for keychain 🔑 Don't forget to give me a like Share photos of your prints 🎣 Personal use only ⚠ No commercial 👉 Check My Patreon 👈
Here is a cardboard spool RFID adapter for the CFS. Tested and used for more than 2000 hours without issue! This will work with all standard mifare 1k rfid tags. Currently tested and working according to the following: Polymaker…
May the Fourth Be With You! Introducing a kit card version of the TIE/dg Starfighter (also known as the TIE Dagger, or the Sith TIE Figher. Individual parts are included so you can print the model without the sprue to save plastic if…
20mm MFT benchdog for 150mm one handed clamps from Lidl. Use M6 headless screw to secure the dog on the clamp. Printed without supports.
I recommend printing with organic supports with a minimum fill of 25%
Fun articulating starfish! Can be printed in resin or FDM PRINTING INSTRUCTIONS: Do not use a brim Keep infill at 100% or use a high wall count
What makes it special This one started with the hexagon shape, and the twist is what makes it hard to put down. It is a fun, easy print, and it is super satisfying to use and print. I like printing it in a unique color, or in a strong…
A box to contain an arduino nano connected with a rc522 rfid module. Not Fully satisfy by Dgoma box design ( http://www.thingiverse.com/thing:1413827 ) I decide to make my own. Like Dgoma I could only recommend the Miguelbalboa's work for…
This is the Constellation Faction Logo from the upcoming Starfied game from Bethesda that will be released on 11-11-2022. There are layer changes at the different colors so you can print it in multiple colors if you do not have an MMU.
Make sure you have everything wired correctly before pushing the cover in, disassembling is a bit tricky, used small tolerances.
this is a handle i design is for big air and board spin. it for duotone.the distance between the holes is 18 cm
If Halloween has already made you feel a bit queasy, the barfing pumpkin might not be the best idea for you! ;-) Buuuut it’s perfect for your Halloween decoratioooons! :-) This spooky pumpkin will add the ultimate creepy vibe to your…
With Paxx12's extended firmware for Snapmaker U1 , you can use custom RFID tags for your filament and the U1 will automatically recognize the properties for each tool head. This works great when you put the spool with the tag on the spool…
Photogrammetry scan of a starfish shell I got in Croatia in 1998. The scan was repaired to have a perfectly flat bottom and no holes. The pictures for photogrammetry were taken with an iPhone X and Meshroom was used to reconstruct the…
well, requested a lot and now it is finally here! they made a video on how to print/put together https://bethesda.net/en/article/6NJNV9ae1Q2tgEU9C7uhgL/tested-starfield-frontier-model I had to adjust some prints, play with the settings…
This 3D printable model is a Flexi Starfish that has flexible legs. It’s a cute and fun toy that you can bend and twist in different ways. You can use it as a decoration, a fidget toy, or a gift for someone who loves the sea. This model…
Experience the dark side's engineering masterpiece with this incredibly detailed TIE Advanced X1 starfighter 3D model that brings Darth Vader's personal fighter to your desk! This stunning STL file captures every panel line, wing detail,…
Modifications on the original Hexagonal sscrewdriver holder: reinforced the center part to make it more robust added pegs for the 38mm Lidl Powerfix pegboard Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Hanging brackets made for M3 screws. I recommend having the bridges and supports set up properly beforehand. Added version of bottom piece with screw holes inside.
A simple model of Vasco the companion robot. Comes equipped with a backpack to carry your sandwiches.
Replica of a V-19 Torrent Starfighter as seen in Clone Wars. The wings are print-in-place and can fold down for flight and fold up for landing. The scale is 1:270. Dimensions are 46.8mm wide, 25.2mm long and 16.7mm high (wings in “print”…
I thought it would be good to have a few "base" parts for further development of holders for the Lidl Powerfix pegboard, so I remixed a part, and created these configurations: single peg, horizontal base 2 pegs, horizontal base 2 pegs,…
An RFID chip repair case is a practical accessory designed to address common issues with RFID chips. When a new RFID chip is inexpensive but new one may encounter registration problems, this case offers an alternative. If the side cover…
A box to contain a pn532 rfid module. No arduino on this one because I'm connecting it directly to my pc (via an usb<->serial adapter). Communication is done trough the libnfc library under Linux Debian (…
Someone at work asked me to make a replacement Safety 1st Everfit & Grow and Go car seat cup holder after his kid threw one of them out the window while they were driving. I used a caliper and copied the one he had left to the best of my…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … My daughter loves to play with LinkDesign's Hexagon…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Starfighter is very realistic Print in place kit card , Assembly required
Small case for the elechouse PN532 NFC RFID Module v3 . Based off of but not remixed from aix150's design . Mine is for a lock, which is why I created the original with a lock design on the lid. The base also has an inset portion for the…
A model I made in Fusion 360. A friend just got one of those fancy $100 wallets. And I decided I was going to make mine instead of purchasing it. So here we are! I did about 5 versions of the wallet before I settled on the final version.…
