148 modeli
The original Part part did not fit on my boxes. I wasn' t able to mount it on the box without it breaking apart. On my box the material perhaps is a little bigger? In addition, it would not have been possible to open it because the…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought dividers for my storage boxes but they fitted quite loosely. So I designed this stabilizer to put on the crossing dividers so they stay at a 90° angle. At 100% this model fits for dividers with 3mm of strenth. I recomment…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction I always wanted to have a flexible transporting system for my gear. Sometimes I take a lot of stuff, at other times only the essentials. Now it is time to present my concept: it is based on “Euroboxes” which are widely…
Overview: Upgrade your eurobox with printable hardware. This set includes hinges, snap locking mechanism, feet and handle to enhance usability. There are euroboxes with lid and handle on the market but there are usually more dificult to…
Printable without supports Remix of https://www.thingiverse.com/thing:5162352
Gridfinity base + boxes for aidB Eurobox NextGen Economy 400x300x120mm and 400x300x75mm which will add 2 or 1 layers of 52mm high boxes into the Eurobox. Features: Custom base plate in 4 parts which will fit into the Eurobox with a gap of…
How to Print Prusa Profile: 0.15mm Quality Other Settings: No support Compatibility Height H = 56 mm For usage with Euroboxes with 7.5cm overall height, with or without lid, stackable Example: Auer Packaging EG 43/75 H = 104 mm For usage…
I just added this assembly to have everything in place needed for a complete support of an 30 cm or 40 cm sized Eurobox ("Bauhaus" version). You can just load the complete print bed definition. Everything prints fine w/o supports in 0.3…
I remixed for the Eurobox versions I get from my local Bauhaus. Please note that there are versions for 30 cm boxes, measured side length of grip side (short end of the box), and for 40 cm sized boxes. Also note that each set consists of…
Insert box for 400x300 Eurobox. Stackable for 2 layers of 4 insert boxes in a 220mm height Eurobox. Can be combined with other, larger insert boxes. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No…
About The most common sizes (length × width) are 600 × 400 mm and 400 × 300 mm, which can be stacked together to fill a Euro-pallet measuring 1200 × 800 mm. This model is 1:10 scale.
Griffeinsatz für Euroboxen von OBI. (40x30x22cm) Diese lassen sich mit etwas “Kraft” reindrücken und sitzen dann stramm genug. Alternativ kann man diese natürlich auch festkleben etc. Das ist ein Remix von “ brunofuentes ” - ein Danke…
Simple holder for your Eurobox. Mounted with two SPAX screws. Print Settings Printer Brand: Bambu Lab Printer: Bambu P1S Infill: 100% Filament: Bambu Lab ABS
Griffeinsatz für Euroboxen von OBI. (40x30x22cm) Diese lassen sich mit etwas “Kraft” reindrücken und sitzen dann stramm genug. Alternativ kann man diese natürlich auch festkleben etc. Das ist ein Remix von “ powermaster ” - ein Danke geht…
This sleeve allows to clip it on to an eurobox and to an eurobox lid. It functions like a hinge when you open the box. It is easy to print and helps for easy attachment by help of an angled cut. To easily clip the sleeve on, start with…
Die Griffabdeckung passt auf Euroboxen von Alutec der Größe 60x40. Sie kann von innen in die Grifflöcher geclippt werden und hält durch kleine Überstände von selbst. Die Abdeckung hat eine kleine Griffleiste am oberen Ende, sodass man die…
Die Extra-Blende für die Eurobox bietet einen effektiven Schutz vor Staub, Schmutz und kleinen Tieren. Leicht anzubringen, bildet sie eine zuverlässige Barriere, um die Inhalte der Eurobox sauber und unversehrt zu halten. Eine praktische…
Mit dem hier gezeigten Modell kann man eine EURO-Box mit einem klappbaren Griff ausstatten und somit wie einen Koffer benutzen. Der Griff (Griff_01_V1) ist so gestaltet, dass er auf die Stirnseite einer Eurobox mit 90 mm Höhe passt. So…
Idea I have a stack of Euroboxes (2x 30x40 cm) on rollers in my workshop. i wanted to put a plate on them nice and secure to use them as an additional work surface. Printing Simple and easy print, printed it in PETG, 3 perimeters. Nothing…
I already had some “Bauhaus” versions of this kind of Euroboxes. So I decided to upgrade them to be really closed and have a colorful look besides the sad gray. The only difference I added to the original is some chamfering of the inside…
I designed some removable clips to attach the “flushing” spray to my Trobolo mobile dry toilet. Can be used for any Auer Euro boxes. They have a cone on the back to fix them in a vertical section of the box. Easy to clip on and off for…
Hey, I have some Euroboxes for hobby stuff e.g. bicycle stuff and don't want to laydown my helmet on the box top cover. So I decided to create an easy hook to hang the helmet on the side.
For my Eurobox/Gridfinity-Transportation-System , I use Euroboxes with hinged lids made by Auer Packaging. You can buy the assembled boxes with lids or save a few € by buying the box and the lid separately (or even buy B-grade boxes) and…
Story: I bought a 60x40x40 Eurobox at my local Bauhaus. However, they were only available with open handles. I have searched for a suitable model and printed the model by Scruffy for 60x40x32 eurobox. Unfortunately, it was a loose fit.…
These models divide the small (red) Eurobox inserts into halves or quarters, this allows for more efficient storage of small parts. You need to import the STEP or STL files into your slicer and print them with 0 top layers, 0% infill and…
Sortboxes for the Auer Eurobox (20 x 15 x 12 cm). The boxes come in thre different hights and with and are stableable. Hights are a fraktion of the total possible inside Volume and come in ⅓, ½ and ⅔. The with of the Boxes as well com in…
This kit allows to modify a regular 40x30 EuroBox to keep 3x EuroPlus Flex assortment boxes. Beside the prints (each 4 Pcs) the follwing is required: 1x 40x30x22cm Eurobox without temper (eg. Auer oder Wibo) 8x m5x10 Screws 1x Printed A4…
Store a dremel 8240 and accespories in a Eurobox (only fits Auer Packaging Boxes) Fits two 12V batteries (bosch/dremel)
Usable for several euro box measures. Mine is 600mmx400mm. Mounting kit for right positioning included.
Base, inverted handle grip and grip to lock in place
Turn your Eurobox into a practical outdoor table or dust-protected storage box using these simple corner blocks. Print four of them to mount a plate or board (for example, 600x400 mm) securely on top of your Eurobox—no more sliding or…
Grips for an Auer Eurobox
Grabbed insert for the eurobox. I design this thing for my worm crate. It prevented that worms run away :) https://www.kurm.de/neue-griffeinsaetze-fuer-die-wurmkiste
Bauhaus Eurobox Grip Inserts with bigger base and click in place
Jeder, der die praktischen, transparenten Euroboxen aus dem Baumarkt nutzt, kennt die offenen Griffe an den Seiten. Diese sind eine Schwachstelle, wenn man den Inhalt vor Staub in der Werkstatt, Insekten im Keller oder beim Campen…
A retainer for euroboxes. Created for a simple eurbox-cart. Holes are for screwing it onto the underground.
This is my design for my filament drybox for up to 5 spools, which I made fom an Eorobox 400x300x220mm. I bought mine from OBI, but other brands should also work. The filament holder is designt to fit a pipe with a diameter of 10mm. I…
I use Euroboxes for storing documents. I created these dust caps to cover the handle cutout, ensuring that the contents of the box remain dust-free. Although Euroboxes are standardized, the handle cutout may vary. These caps are designed…
Einfacher Schildträger, auf dem handelsübliche Beschriftungsbänder wie z.B. die von Brother, gut haften. Hält gut ohne Hilfsmittel. Meine Materialempfehlung: PETG Leide sind die Boxen nicht sehr maßgenau und die Materialdicke schwankt.…
Hier habe ich Euroboxen von Auer-Packaging verwendet, die 12cm hohe Version der 30x40cm Boxen. Zur Befestigung habe ich Klettverschlüsse benutzt, sowohl in als auch unter der Box, da sie im Kofferraum, bzw. auf der Hutablage eines…
Attaches to any Auer Eurobox. Easy to clip off and stow away. Added cones on the back to be able to fix it to a certain heigth-area of the box. Best printed in PETG, no supports needed.
Die Eckhalter sind für das Stapeln von Euroboxen 600x400 auf einer - mir Rollen versehenen - Holzplatte-
Bin that fits in a Eurobox 400x300x200 box as a 2 piece devider Print instructions pla 0,3 mm works fine
Einsätze für den "normalen" Sortiment Koffer, in jedem Baumarkt zu kaufen, der Größe 445 x 340 x 70 mm Außenabmessung. Oft bräuchte man längere oder breitere Einsätze die man nicht zu kaufen bekommt. Es wurden 14 neue Größen gezeichnet.…
Staubschutz zum Einsetzen in Euroboxen. Die Modelle wurden für die Eurobox (60x40x32 und 60x40x22) von Bauhaus modelliert. Es ist ein TPU Ring beinhaltet, der die Luftdichtigkeit Gewehrleisten soll.
These are different inserts for my Eurobox/Gridfinity-Transportation-System to accomodate either 4 AA or up to 8 AAA type batteries in the shallow 7.5-cm-boxes. (They are not held in place in the 12 cm high boxes.) The are each 1 x 1…
Reprobox na reproduktor 36 mm a 2 x 53 mm priemer. Predpripravené držiaky na uchytenie meničov. Speaker box for 36 mm & 2 x 53 mm diameter. Contains holders. If you like this model, give it a thumbs up :)
Schienen für AUER Euroboxen. Bei 30x20 wird nur die Schiene an sich gebraucht Bei 40x30 wird je Seite eine Schienenverlängerung benötigt Bei 60x40 wird je Seite zwei Schienenverlängerungen benötigt Ist gestückelt für mehr anwender in…
Dieses Modell ist ein Einsatz zum verschließen der Griffmulde in den Euroboxen der Größe 30x40cm von Bauhaus. Ich habe drei andere Modelle gedruckt. Leider war bei allen der untere Radius ein ganz anderer als an meiner Eurobox. Deshalb…
I was looking for a practical sorting solution for my small parts. I have been using Gridfinity for quite some time, as well as Euroboxes, which have proven themselves in my everyday work. I found adapter solutions between Gridfinity and…
I bought Euroboxes from AUER that can be locked vertically. Unfortunately, it wasn’t clear before the purchase that these connectors don’t fit once a lid is on the boxes. Therefore, I had to design new connectors that are slightly longer,…
Eurobox lock for TBA boxes. For printing I recommend asa or petg. Fill 15% supports - yes, spacing 5mm. Spacing of contact layers 0.265 Perimeters - 2
Lassen sich gerade so reinpressen, halten dadurch aber sehr gut. Eine Version mit kleiner Falz (Supports erforderlich) um den Inhalt mit kleinen Foldback-Klammern zu befestigen. Eine Version ohne alles, also normales Griff.
A simple Clip to attatch labels to all sizes of euroboxes. I would suggest printing in PETG and at least two walls. The design uses one M4x6 Screw to secure the clip to the box.
Simple part to hold a lid in place when put onto an Eurobox. I used it to create a table as well as a bench to sit on. Due to the Eurobox's standardized dimensions (40cm x 60cm) a pallet pillow perfectly fits on 3 boxes side by side.
Euroboxen sind praktisch und weit verbreitet im Einsatz. Meist werden sie ja gestapelt, ich brauchte sie aber frei und abnehmbar an der Wand befestigt. Das Ergebnis ist ein breiter Haken, an dem man die Box einfach in ihre Grifföffnung…
Halterung, an welche die Verkleidung befestigt werden kann. 20mm breit für doppelseitiges Klebeband. Löcher sind 3,5mm. Gedruckt in PLA.
soap holder for camping with draining grid can be hung on a eurobox can be attached to the car with magnet
Got a lot of harddrives to carry around? Maybe because you work in computer service or in a datacenter? Then this frame insert for these cute 15 × 20 cm Euroboxes is here to make your life easier. (Particularly AUER EG21512) This model…
This Design is for the Radrunner from Rad Power Bikes and their Front Rack Print the file “eurobox_radrunner_schiene_x2” twice! You need standard m3 and m4 screws and nuts to mount the rails on to the front basket This Design is the first…
Griffmulde für Euroboxen 60x40cm und 40x30cm von Bauhaus quick and dirty - grip cover for Bauhaus Euroboxes
I had a bunch of filament left over from my Robox Printers and wanted to use it on my Bambu with the AMS. Print two of these on the strong infill setting (25% infill) and they snap right on each side of the Robox reels
The 3d printed battery operated robot is based on my type 3 claw foot walker mechanics. I re worked the design so that the robot would have moving arms head and meter dial on the chest. I added LED's for the yes on mine. I used a low cost…
Protection corner for guitar amplifier with large rounded corner. It looks awesome with fuzzy skin.
This is a modified hub for the QuattroBox that replaces the original integrated pressure arm with a more robust, spring-loaded mechanism. In the stock design, the bearing that presses the filament against the encoder gear is supported by…
Da das Gehäuse von Flo_G bei mir leider nicht in die Griffe der Eurokiste passte, welche im Bauhaus verkauft werden ( https://www.bauhaus.info/kunststoffboxen/bauhaus-eurobehaelter/p/10753223?adb\_search=euro ) habe ich die Maße des…
Diese Modelle sind passgenaue Einsätze für Euroboxen im Format 600 × 400 mm (Euronorm). Entwickelt für Werkstatt, Lager und strukturierte Aufbewahrung. Die Konstruktion orientiert sich an realen Industrie-Euroboxen mit Stapelrand.…
This is an insert for my Eurobox/Gridfinity-Transportation-System to accomodate the Panasonic FZ1000, some (micro-)-SD-cards and a spare battery. It is 3.5 x 3.5 Gridfinity-units in size. I cut out the corners from this square to make…
Super easy stone/nut to put wheels onto an Auer Eurobox.
Place it diagonally on your build plate.
Riese Muller Multicharger Eurobox mounting Brackets for a clean look and distributed weight. Standard Front carrier (not the cargo one). Cable Ties 4-5mm wide. Use a durable material such as ASA. Layer height 0.12 or lower for higher…
For some of my euroboxes, I wanted to close up the holes left for the hands so that I can store them outside-ish without insects crawling into them. These fillers fit into “Eurobox NextGen Economy” made by ab-in-die-box.de. Printed in DAS…
New in V1.4 thicker walls slide geometry improvements The Spacing originates form a 40x30 with in inner dimension 364x264 mm, 20 mm under the top edge. The spacing grid for a 40x30 EuroBox is 8x8, for 60x40 it is 8x17. Every Organizer is…
This is a remix of the Folding Handle for Eurobox created by Podowon . I have extended the handle by a few centimeters to provide a more comfortable grip. It is about 59,5 x 109,6 mm large. Please use the base / handle holder from the…
TPU Foot for QuattroBox MMU These compact TPU foot are made to fit under the QuattroBox MMU , improving stability and reducing vibration or sliding during operation. Material: TPU Dimensions: 13 mm × 10 mm × 7 mm Mounting: M3 screw…
This is a small adapter spacer to widen the idler Filamentalist 80mm idler roller to fit the QuattroBox MMU. I had already printed idler rollers for the Filamentalist Rewinder and it felt unnecessary to print new male and female ones for…
Inserts for Eurobox / stackable
Shelf support Printed in PETG. No support needed. Print 2 per Jobox. Screws and Nuts 1x DIN 603 M5x20 1x M5 nut 1x M5 washer 2x screws per mount to attach mount to shelf. I used self drilling sheet metal screws. Angle Iron For the shelf…
If you have some of the Eurobox System boxes you might have also some of the inserts. The problem (at least for me) was, that for small pieces the inserts where to large. Therefore I created a divider for a 1/4 crossed insert. There are…
Adapter allowing to stack an Aykasa 4314 foldable create on top of an Eurobox 40 x 30 cm.
fits onto a standard Eurobox
This is a drawer handle made to fit bauhaus (hardware store) store brand euroboxes size 40 x 30 x 12cm. It likely also fits other sizes by the same brand. Compare your box to the last picture to make sure it fits. I added 2d- and…
Mithilfe dieser Teile kann man eine Eurobox als Deckel umgedreht auf eine Andere Eurobox packen und behält weiterhin die Stapelfunktion für weitere Euroboxen. Gedruckt habe ich in PETG
Im Slicer einfach spiegeln für Links und rechtes Bein. Die Schelle findet ihr hier. https://www.printables.com/de/model/363077-ikea-lack-beinschelle-fur-haltesystem-europox-112l
The Hobby ProBox (from recent Kickstarter) makes an great carrier for painting supplies and miniatures. I felt it did not provide enough storage for brushes so I designed a tray to hold brushes. Then I noticed that the bases on my…
5cm Abstandshalter für Euroboxen - kann geschraubt (M4) oder genietet (4x12mm Blindnieten) werden.
Grid inserts for my Eurobox drying boxes. You need 2 pieces for a half-size Eurobox.
Vollflächige Gridfinity-Base für Eurobox 600×400. Passgenauer Randabstand. Einlegen, fertig. Format: Eurobox 600×400 , auf typische Innenmaße (~ 555×355 mm ) ausgelegt. Raster: 13×8 Zellen → 546×336 mm Nutzfläche. Use-Case: Für Nutzer mit…
The idea for this came from Thing 11977, although the design is all new. Basically, it's an apparently impossible dovetail joint that opens by rotating. My interesting little observation was that it needs almost no thickness, and no core,…
Raspberry Pi Zero box designed for Plastic Inserts and M2.5 screws. The Fasteners that I have used are PSM Heat-Lok . I use my soldering iron to insert them, in this design is a bit difficult as some section of the wall housing the insert…
These are different inserts for my Eurobox/Gridfinity-Transportation-System to accomodate either 2 handle bar mounts or 2 roll bar mounts in the shallow 7.5-cm-boxes. (They are not held in place in the 12 cm high boxes.) The inserts are…
Baseplate for 30x20cm Euroboxes from Surplus Systems.
Eurobox cardboard shredder for recycling boxes in my office/workshop. I use the resulting shredded cardboard for packing customer orders with 100% recycled filling material. AUER 60x40x43cm eurobox Amazon Basics Shredder Paper and Credit…
I needed a riser table to gain some extra space on a maker faire. Decided to make it stackable with the Eurobox standard and add power distribution, too. BOM (approximate) 4x 2020 extrusion 600mm (long sides) 6-8x 2020 extrusion 360mm…
Hanging for my custom Eurobox Prusa Mini setup where I have the PLA in the same box as the printer, so I created this hanger to fit a 25mm stick where I can hang my filament. One side is closed, the other is open in order to exchange the…
I designed the feet so my vacuum can fit under it. You will need some M5 screws to attach the feet.
Some parts didn’t fit on the MK52 bed (Prusa MK3). They were split to fit these beds. They need to be glued after printing! A slot was added to help align the parts for gluing.
Print. Put Heat inserts (2, 4 or 6. I use 2) from the back. Mind the orientantion of the support if you would like the same orientation and fix the support to QuatroBox with 4 M2x10 screws. After fix the BTT MMB V2 to the support with the…
