Liczymy pasujące modele…
This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Ironing flow test for your filaments. How often the top layer that was ironed it's cracked or lines still visible ? No more failed top layers. Specially with PETG you need to fine adjust the ironing flow to achieve the best results.…
Try printing at 80% of speed and very hot bed (75° ?) Best R
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
The design can be entirely 3D printed and can use hobby electronics components. However I would recommend using Will Cogley’s animatronic compatible eyes and the dedicated EyeMech controller board available for purchase through…
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is… Update: Added different bottom…
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
Recommended layer height 0.15mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09/05/2022 Electric dice REV1 d6 layout correction
Let´s build it! Animatronic FNAF Bonnie Video Part 1 - https://youtu.be/sBMSrNnxWrI Video Part 2 - https://youtu.be/6_IwNrdvX1I Video Part 3 - https://youtu.be/xwtQQssEBv4 List of parts- Check videos description Help me keep creating…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
Works with either Bambu Studio, or Orca Slicer. Uses default 0.20 Standard @BBL X1C settings. To use with P1P Series printers, you will need to adjust the profile to match your printers settings. The Ironing modifiers should remain in…
A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists
Voroni Cat Hey maker! 👋 I created a simple cat model and applied a Voronoi pattern – lots of fun! Features: Stylish Voronoi design for a unique look. Perfect for display, desk decor, or as a small gift. Printing Tips: PLA or PETG…
Snaptronics gives you a bunch of solder-free 3d-printed bricks to build various basic circuits in a breeze on a magnetic snap-fit basis.
Just a remix to add some detail https://www.printables.com/model/117363-brain-electronic-circuit-wall-art/remixes I printed this with the Revo .25 nozzle in 3 and 4 colors. Print time took 4+ hrs no brim let it completely cool before…
I a ball joint foxy (https://www.thingiverse.com/thing:1112196) but couldn't really find any of the other animatronics using ball joints (besides a "grim" foxy). So, I decide to make them. If you have found models of other animatronics I…
A Voroni AA and AAA battery dispenser modified to mount to Multiboard. You'll need to add a Drop-In Nut Snap and two M4 screws to connect to the board.
Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…
This is a matrix 10x10 to find the best combination of flow and speed on the ironing feature.
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
Veronica : 6th Station of the Cross calvary in Retz, Lower Austria. Made in 1727
Ironing Flow Test model for testing 10% thru 60% flow in 10% steps
A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…
Test to calculate the straightening speed on the Orca Slicer. With this test, you can calculate the straightening speed you need by adjusting the speed from 15 mm/s to 40 mm/s, and using different flow rates from 10% to 50%.Test to…
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
Voroni Rabbit Hey maker! 👋 I took a rabbit model and applied a Voronoi pattern – lots of fun! Features: Unique Voronoi design for a stylish look. Perfect as a desk decoration, gift, or display piece. Printing Tips: PLA or PETG recommended…
Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.
Źródło oznaczyło ten model jako treść 18+.
Modified Orca Slicer settings for my Neptune 3 Pro and added graph scale markers.
Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)
Please consider Liking this model :) Ironing test Each rectangle has different ironing settings. Pick the one that suits you the best :) Originally designed for my SV08 but you should be able to adjust it to your printer
Safely pry into electronics for repairs and service. You're likely to damage these prints before you damage your devices, but of course exercise caution why prying into expensive things and always make sure they're turned off before you…
These models are designed to test ironing flow and speed. They are optimized for 0.2mm and 0.16 layer heights. Models test the flow rates of 10%, 15% or 20% through the speeds of 10-40mm/s. The sliced files are for a Bambu X1C. Just load…
This box is designed for the following components: - SKR Mini E3 or stock Creality mainboard - Raspberry Pi 3B/3B+ - Stock Ender-3 Meanwell PSU - Stock LCD Screen Mounting: - The box mounts onto the PSU fan screw area. The PSU fan will…
Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…
Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG
YET ANOTHER IRONING TEST. I've created in orca slicer an ironing test. Found many online didn't seem to translate fully for the K1 profile and had to manually adjust & check the ironing settings for each square, so I just made my own,…
Easy box for electronic projects by pbtec There is a newer Version available. See https://www.printables.com/model/863273-easy-customizable-openscad-electronic-project-box Use Openscad customizer (Menu Window/unselect "hide customizer")…
The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws
The ironing process (and its results) depend of three variables: flow rate ( FR ), spacing between ironing passes ( SBIP ) and printing speed ( PS ). The matrix shape allows to check two setting combinations at once; whilst we have three…
Features A 3-pin version of my magnetic connector for low-powered, removable electrical connections Fits various sizes of magnets from 5 x 2mm up to 10 x 3mm Compact and easy to build into your models - the 6mm version is roughly 10mm…
I didn't find a travel box for the same kind of toothbrush that I have, so I made one. The brush snaps to the case by the neck and is easy to remove by hitting it to your hand. The top also snaps to the case. I neede these fast so had to…
Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…
OLD VERSION V2 Available on my profile Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full…
This was my first attempt at a helmet. I made it for my daughters' Halloween costume, because I wasn't happy with the designs I could find (including paid designs) and we really wanted a working sight with blinky lights. I've included a…
Eye with dilating pupil powered by a 2g micro servo: https://www.aliexpress.com/item/1005002973104855.html Will update with additional mounting for use in OneIdMonSTR's anmatronic skull project. It's still a work in progress and fiddly to…
I share with you the mini roni kit that I made for my glock cyma electrica for airsoft, you can make the barrel of the gun in 3D but I recommend putting a metal barrel, the gun was painted satin black. It may be necessary to heat in some…
This project takes an Atorch DL24 Electronic Load module and makes some minor modifications to it and encloses it into a custom 3D printed enclosure to provide improved handling and board protection. The project also converts the DL24…
You can print as one piece or in 3 Pieces for smaller printers and glue it
(Update 1/26/2020) Added Amp and Speaker cases. Added a cover for LCD panel's bottom part. (Update 1/11/2020) Thickened walls slightly. This improves rigidness and also the modified back wall makes assembly easier. Summary This is a case…
NEW VERSION 4.0 This is a large modular electronics enclosure for 3D printers. It's big enough (depending on controller board size) to hold the controller board, a Raspberry Pi, and other electronics. It is not designed to hold the PSU.…
Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…
INTRODUCTION This is version 2 of the design backporting all the learnings from the release of EMS 300/350. The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another printed mount for each of the…
I have been looking for a electronics box that has the lid on the underside of the printer but I have not found one so I made one myself. I have include the cad files so you can make it your own if you want. Whats in the box? 1 Raspberry…
I needed a drawers for my electronics and small parts. I could have bought it but why If I can design and print it by myself? This design was born out of the need of something that I could keep on my desk, practical and easy to access…
Electronic box/enclosure fully customizable Updated V1.01 : Add vents Updated - V1.02 : Add invert option Footbox length update Vents update (logo) Use screw_holes.scad librarie https://www.thingiverse.com/thing:1731893 Updated - V1.03 :…
Motion Follow Eye Animatronics. This Arduino project uses an Optical Flow Sensor (ADNS3080) to capture movement. Then translate the data to move servo's making it look as eyes are following moving object. full project:…
To have the pattern on the back it should be printed at 0.2mm layer height and if you also want multi colour then you need to change the filament when the second layer changes. This is the name of the maker of the model on and this site…
These are mostly faithful recreations of the flutes used by Noah and Mio based on various in-game cutscenes and a couple of references images from Monolith Soft for the actual flutes used to perform the music in the game. They're bigger…
Better print in PETG with increased walls and infill
Attention! Print preparation is only available for STEP format model. STL model is for viewing only. Only when printing from STEP format can you achieve the stated characteristics! An organizer for mobile storage of radio components and…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
After trying various electronics enclosures for my Ender 3 Pro, I was not happy with many of them due to various issues with each Fit was tight and not very forgiving for running cables Airflow/cable management were usually afterthoughts…
The thinnest part of the opening pick is 0.3 mm. The spudger is 0.5 mm. Printing: Opening pick: 0.1mm layer height, 100% infill. For the other ones just default settings.
UPDATE: 06.03.2026~ I have uploaded .3mf files saved in Orca Slicer and Prusa Slicer separately as it seems not every one of them is compatible when opening the .3mf saved in different slicer. Hope this will help ya guys. UPDATE:…
Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…
a cool all in 1 desktop device organizer for airpods, iphone and smart watch. This also allows you to charge your devices while in the stand.
Atorch DL24 150W Electronic Load Case For the newer version that can be powered by a 5V USB-C power supply . The top cover can be installed without having to disassemble the heatsink with fan and re-paste the transistor - The top cover…
A tool-less case for a Raspberry Pi 5 with the Pimoroni NVMe SSD adaptor base. It's also designed for the OEM Pi active cooler. Assemble the Pi / Adaptor / SSD as per the Pimoroni instructions with the stand offs and 8 screws that came…
Ender 3 V2 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with on open power supply can be deadly. If you are uncomfortable with the PSU open, keep the lid on and install it and see if it can…
Advise to print with 100% fill to lower buoyancy and smallest possible layer height (mine goes to 0,08 mm). Chose water resistant materials like ASA or ABS. I may have overdone with supports here.
Based on the awesome work of Synyster1911 here: https://www.thingiverse.com/thing:4812842 UPDATED 03/09/2021: The "_v49" have the box lowered 2mm so that the covers are aligned with the extrusions, the rest is identical to the original…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 186.67x250mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…
These brackets can be used to hold two MeanWell UHP psus (usually one 24v and one 48v). Two versions are provided: one for UHP-200 models and one for UHP-350 models. I also included a modified version of the din rail mount which holds a…
Weirdly enough, it's sort of hard to find a calibration table for ironing flow + speed. Also, Reddit seems to have wildly different settings they live by for PETG. This model leaves no guesswork. The models have different thickness…
Ronin - Japan 2d Wall art, simple but very nice print
This enclosure is designed to hold all the electronics for the printer. It holds the MeanWell power supply, controller board (4.2.7), front control panel, Raspberry PI 4 and a buck converter to power Raspberry PI. Included in the files is…
Images of printed part by me. Printed with eSun PLA+ orange filament. If this one breaks, I’ll print it from PETG for the added flexibility and longevity. I used normal cura supports for this, but I think tree supports also work.
This 2-tier electronic components storage box is the ideal solution for storing and organizing your electronic components in an efficient and convenient way. It is equipped with two separate compartments for storing your spare parts,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Updated design! Made for my specific needs, but you can enjoy it as well. Click here for the previous version. NEW: Place for the BTT 24v UPS Detachable back door for the wireing Exhaust fan 2 on/off switches Holes for cable management…
A cool voroni heart statue I found on 3dmag.org and thought I would share it on here fro valentines day
An OpenSCAD electronics enclosure designed to hold one rectangular PCB. The default settings are for the following: -PCB w/ 100mm x 40mm mounting hole spacing -SPAX #8 1 in. pan head screws for cover -M3-0.5 threaded heat set inserts for…
ITS A SPREAD ONLY This is a Mini RONI style attachment that can be attached to any Airsoft pistol and converts it to a cool futuristic CARBINE lookalike as long as there is a P-Rail attachment on the pistol. This is only a case and does…
V2 (updated design) is available - https://www.printables.com/model/553387-ft-ems-voron-v02-v2-electronics-management-system INTRODUCTION The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another…
We modified a human head (from lehthanis) existing to make it receive eyes animatronics The body is empty to receive the mecanism and spare filement The Eye is our version for the animatronics. We bring some changes as described in the…
Simple holder for Wera electronic screwdrivers.
Basic parametric snap fit electronics enclosure / box. Printable without supports. You can size as you like using user parameters in Fusion 360. F3D file supplied. When exporting STL / STEP, it will already be orientated ready for…
This is a full model build of a Tron legacy disc desktop display including circuit python code to light it up. The Base was created to be printed on an MMU and I'll add a tutorial on how to create the whole piece shortly. I printed the…
Two versions are included, a “Simple” one which is simply the case and a “Mounted” one which allows to.. mount the Pi on something using taper 3x6 screws (I used wood screws to mount it to the side of my Lack enclosure). The “Simple”…
