Liczymy pasujące modele…
Just a hairdryer wall mount holder / stand for Rowenta. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 30 **Filament:** FormFutura rePLA White Category: Household
We lost the original diffuser, so this one fits. Printed in ASA and smoothed some parts with acetone.
Since I had Miele accessory nozzles with a 35mm diameter but now own a Rowenta vacuum cleaner with a 32mm diameter, I was in need of an adapter. Unable to find a suitable design, I decided to create one design myself. Included for…
I love to print this model tilted so it has the most strenght in the inside cilinder. Raise the number of shell layers so the whole knob is solid. I uploaded also a «simplifyed» version because the original has too many triangles for what…
Vacuum head adaptor for Tefal (Rowenta) X-Force Flex 9.60 (TY2039,TY2079,TY20xx) 25mm to use with Generic 32mm and 35mm Recommend print parameters: Wall loop: 2 Infill: 100% concentric Supported: no Brim: outter 5 mm
The manufacturer does not sell this part separately and expects that, instead of repairing the vacuum cleaner pipe, you will simply buy a new one. This clip is responsible for the folding function of the pipe. My model fits quite tightly…
This is a useful design for the ROWENTA X-FORCE Flex 9.60, to which I added another holder for the attachment because there were not enough of them on the original model.
This design is a stand for the set of accessories that come with Rowenta vacuum cleaners. It is wall-mounted using two screws.
I would like to hang all attachments for Rowenta vacuum cleaner so I designed one based on the hanger directly on the vacuum. Later slightly adjusted to fit to all attachments (as they are not same).
Nozzle holder compatible with the Rowenta RO7681 to hold the small brush and crevice nozzles. Hole diameters: 40mm, 45mm
Rowenta/Tefal cleaner adapter to generic vacuum cleaner pipe. The intend is to be a emergency/substitute adapter. Idea came from broken brush at my parents vacuum cleaner. Bonus - it should work fine with vacuum bags now (i couldn't use…
Kit conversion double flux / double tuyaux - Rowenta Turbo Eco Sens+ Ce set remplace la grille d'aspiration d'origine du condenseur de la climatisation mobile Rowenta Turbo Eco Sens+ par un système en deux pièces, plus rapide à imprimer…
We have a fan which oscillation axis broke. I think that is because of fatigue https://en.wikipedia.org/wiki/Fatigue_(material). The place where it broke does have has a change of section, which is prone to fatigue breaks. Another reason…
The Vacuum Vault is a cleverly designed wall hook created to store and organize the various attachments that come with your Rowenta vacuum cleaner. This 3D printed storage solution is carefully crafted to accommodate the unique shape and…
I made this spare part for the obvious reason that the original one broke. Maybe it will help someone else save 50€ for a new vacuum cleaner. Printed in PETG 11 Perimeters (100% fill). I prefer this over 100% Infill but that should work…
Couldn't find those anywhere so I made up something quickly, they work fine I printed mine in PETG, anything else should work too. To fit you slide the guard from the side, there is a stopper on the other end, with a well calibrated…
Need to keep your nozzles near your Rowenta vaccum cleaner? Look no further. This design is meant for the Silence Force - Cyclonic, model RO7253EA, type RO72OE0.
it's a replacement part for the inside of the vacuum cleaner handle.
Rowenta compact power vsuvka pro podlahový nástavec. Tištěno z ASA, možno použít PETG, žádné podpěry nejsou potřeba.
I have a 12 years old vaccum cleaner and the clip used to lock the hood broke during my last used of it. The model is a copy of my RO8341 rowenta silence force vaccum cleaner. I think it will work for all reference under RO83xx. I printed…
Upgrade your Rowenta Accesssteam experience with this custom-designed 3D-printable funnel! Specifically engineered to simplify water tank refilling, this funnel fits perfectly with your Rowenta Accesssteam, making the process quick,…
Treba použiť silnejšiu pružinu do fí 6mm, kolík je zo špicu z bicykla.
Designed this mount for my X-PERT 6.60 Animal vacuum, but thanks to the conical design of the supports , it actually fits many other Rowenta models – and even some vacuums from other brands. The tapering allows a snug fit across a variety…
Left and right bracket for tefal/Rowenta G05-M Print with high temperature resistant material. Use at your own risk.
Replacement for the right grill insert. Print in PLA.
Two hooks to organise the bathroom, and save space. It will be possible to hand the Rowenta L'Oreal Steampod under a shelf with these ones.
Soporte para el cepillo Rowenta Hair Therapist. El modelo está dividido en dos partes. Sepuede imprimir todo ala vez o se puede imprimir el interior en flexible (para proteger el cepillo y no arañarlo) y la parte exterior en ABS o PETG.…
Single 1x1x5 bin customized for a Rowenta Shaver.
A simple holder with/without supports and two 4mm holes.
Rowenta vacuum cleaner - hole cover
Print in PETG or any other more durable material. I previously had a Rowenta vacuum cleaner and switched to Miele, but I was very satisfied with the rotating head for cleaning carpets, so I made an adapter.
Requires a single screw with max 5 mm thread outer diameter and a 10 mm wide, 5 mm tall head. There's a cylinder around the screw hole in the STEP file to be used as a 100% infill modifier.
It's an hair clipper support for Rowenta designed by Karl Lagerfeld
wall mounted drying station for filter and roller for Rowenta X-Clean 10
Rowenta accesory holder. FreeCAD file attached for easy modification if needed. Recommend to print from PETG with at least 4 perimeters . Inspired by a similar solution for Shark Vacuum:
Soporte para el cepillo Rowenta Hair Therapist. El modelo está dividido en dos partes. Sepuede imprimir todo ala vez o se puede imprimir el interior en flexible (para proteger el cepillo y no arañarlo) y la parte exterior en ABS o PETG.…
The manufacturer does not sell this part separately and expects that, instead of repairing the vacuum cleaner pipe, you will simply buy a new one. This clip is responsible for the folding function of the pipe. My model fits quite tightly…
Halterung für Rowenta (RO4B50 Compact Power XXL Animal) Staubsaugerzubehör zur Moontage mit 5mm Schrauben an der Wand.
This is a wheel for the Rowenta X-clean vacuum/cleaner. Our device came back from repair (broken handle) without the wheels. I designed this so that we can use the vacuum until we receive new wheels. There are 4 parts, all in the STEP…
Did you notice that, when mounting your X-Force Vacuum Charging station to the wall, the vacuum hangs freely in the air? Using up a lot of free space? In my case, it made it impossible to mount behind a door, even if hanging it high up.…
Don't want your accessories right below the charging station? Want to mount them somewhere else? But the (very good) original tool holder clips into the charging dock and can't be mounted to the wall by itself? No problem, clip the tool…
The original knob on my Rowenta fan cracked around the center shaft, making it loose and unreliable. I know you could simply reprint the whole knob, but I also know you’d probably love to keep the original one and just fix it while using…
Our desk fan was knocked down on the ground (twice), and the plastic part connecting the base with the metal cage broke. I did my best to recreate it, but it is not a perfect copy. Most notably, the handle is differently shaped to make…
17/01/2023: added a second .stl model for the metal part connected to the gear. The pin that inserts into the bearing seems to be fragile. 14/02/2023: added a v2 of the gear 2 model. Seems to be free of alignement problems of the previous…
Allows for convenient placement of the accessories on the doors or sidewalls of your storage compartment. The long part can be glued together but gluing is optional. I did not glue the parts together. There are more accessories available…
Power switch extension for Rowenta vacuum cleaner, mounted by doubleside tape Vacuum cleaner model : Rowenta RU5053EH
Clip for Rowenta cordless stick cleaner to hold the rotating brush in place. Print instructions I printed it with PETG. You may use other materials as long as you have a strong layer adhesion and a minimum of elasticity for the latch.…
I designed this knob as a replacement for the original one I broke as you can see on the last 2 pictures. If you fancy modifying the model I've included the STEP file, feel free to share and remix but do not sell please. Print…
Rowenta AirForce vacuum cleaner brush spacer. It raises brush from flor up to +2mm. Problem: original brush (RS-2230001082) has way too small gap from floor. As result many small garbage particles are simply get pushed by brush, and never…
The part contains two parts, you need to apply acrylic glue and slide them together.
Repair of my mom’s iron that could no longer use it because the steam control lever was no longer working.
I created a slightly taller foot for the Rowenta VU5640 fan. My vacuum robot was constanly driving onto the base of the fan. I printed it from TPU / flex. As I have two different versions of the Rowenta VU5640, I can tell you the both…
My first "big" design from scratch. I printed with PETG and support with 0.2 layer and 30% infill
The hose of our Rowenta vacuum cleaner broke near the handpiece. I designed a part to allow the hose to be cut shorter, then re-attached to the handpiece. To use, unsnap the retaining ring from the vacuum handpiece. Keep this- you'll need…
Replacement for a broken clip that attaches the motor housing to the body. The original part broke after a fall. Best printed lying on the side with support. Material: PLA or PETG Nozzle: 0.4 Layer: 0.2
Feel free to update the design - you can write to me for solidworks model. This was a fast model but works great on first print.
Are you experiencing difficulty with the fit of the tube on your Rowenta RO4B25EA Compact Power XXL vacuum cleaner? It's time for hassle-free vacuuming without the vacuum head constantly falling off the telescopic tube. This model is…
This adapter serves as a connector between a Durabase vacuum and a Rowenta vacuum.
This is a Tool holder for the additionaly tools that comes with the Rowenta X-Force Flex. Maybe it will fit other vacuum charging stations from that company haven't tried it until today. Printed on ELEGOO Saturn 3 Ultra Edit: added V2…
As i wasnt able to buy the descriped HEPA Filter for the Model Ultimate 3D Printer Enclosure Filter V2 in Germany, I searched for a similar one and created a simple Adapter for it. The Filter I found is for Rowenta Swift Power Cyclonic…
Made for Silence Force Cyclonic 4A, may also fit others. This holder is to be mounted on the vaccum cleaner itself. I found the original slot performing poorly, weight of the hose and the tube made it unstable. This holds it much more…
I lost my hanger on my Rowenta upright steamer so I made a replacement. Printed with: 5% gyroid Supports on for Main Body
