Liczymy pasujące modele…
I was sick of buying crap phone holders on Amazon that only lasted a couple of weeks. I decided to make my own. The iPhone 12 with a case fits perfectly in the stand, you can even charge while your using it. Wireless charging may be to…
Wydruk około 8,41 €–10,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model will support the NI Maschine Mikro mk3 on your desk, holding it up at a 20-degree angle in order to better see the LCD screen and buttons, and also making it a little more ergonomic for finger-drumming at arms-length. The…
Wydruk około 4,94 €–6,04 € nettoWstępna wycena jednego wariantu
I recently bought the " Learn Lockpicking Bundle " from Covert Instruments. It comes with a repinnable practice lock and several basic lock picking tools, but no case for everything. I designed this case to fit everything including the…
Wydruk około 5,37 €–6,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
This is a remake of my 3 string instrument called the Triotune. It is very similar to a soprano ukulele, minus one string. This is designed to be modular, so you can swap out parts to fit your needs. There are three necks to choose from…
Wydruk około 18,50 €–22,61 € nettoWstępna wycena jednego wariantu
A simple box, with cover, that I created to store the pins and tools for a lock picking hobby. It has 4 smaller compartments for parts and a longer one for tools.
Wydruk około 1,94 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can tune and soften the soundresonance with snowflakes from Oxa! I use this for the beautiful melodie snowwalz from Johann Strauß! https://youtube.com/shorts/lxx9WU_wVQM?feature=share Please look also for my new bigger 210mmXYZ…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ornament of musical instrument - CIMBALOM Multicolor by layers (simple extruder)
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Iris-strument Leaning fusion360 project. 20 Percent Fusion 360 - 80 Percent Blender. Can this be made into something useful? Reverse Engineer it. Make it. Use it. Post it. Enter a chance to Win a Filament Voucher. Best Use Case Wins.
Wydruk około 20,82 €–25,45 € nettoWstępna wycena jednego wariantu
This is a cartridge holder designed to help you organize your TI-99/4A cartridges on a shelf or bookcase. The model features a parametric design allowing for extensive customization. A couple of preconfigured models are available…
Wydruk około 6,60 €–8,07 € nettoWstępna wycena jednego wariantu
Heyho Ich glaube mein Schwein pfeift :) (German) my daughter had a beautiful ocarina made of clay. Unfortunately, this had fallen down and shattered into 1000 pieces :( So since she was very sad I downloaded and printed a simple one. But…
Not sure if strikes the right tone, but for sure it is loud. This 3D Printed slide whistle will bring some fun. A quick two hour print (it don't needs support but some sanding may be required Inspired by the this Prusa Blog Print a…
If you like my work I hope you'll consider supporting me on Pateron: https://www.patreon.com/3DPrintingProfessor Subscribe to me on YouTube: https://www.youtube.com/user/mrjoesays After seeing the overhang on tzzhc4's print (…
I have made this model to get all instruments following with FF ADV5M PRO: side cutter, screwdriver, Allen wrenches, glue stick, grease, nozzle cleaning pin, extra hot-end/nozzle assembly and USB stick, also a place for the printable…
The dulzaina is a typical Spanish instrument, that, typically, goes in folkloric parades next to some drums. I challenge you to learn how to play it and share some videos 🤟. This design is about a replica of a real dulzaina. The final…
Hammer needs supports to print
Here is a remix of the altimeter desk clock, including a tilted version, or with magnets, and also extra faces/needles (Airspeed and Heading indicator), with MMU compatibility if you have it (use faces with “MMU Only” and split them to…
The original cover has some riser to keep cover of from the display window & buttons. Added those. This one also has Raymarine logo. When printing a single color printer: Slice logo.stl to .gcode Place the body just on the top of logo to…
I needed a replacement cover for a TI-89 Titanium edition that I was selling on Facebook marketplace, so that the buyer would be satisfied. Luckily, I had another TI-84 calculator that still had its original cover so I could recreate one…
My old boat has a mix of Raymarine ST60 and ST60+ instruments. It's fairly simple to find printable models of the sun cover for the ST60 model, but I haven't found any good ST60+ cover, so I decided to design it. The differences with the…
Four Part stand for the Native Instruments - Maschine MK3 This model does require some assembly and uses “Heatsets" as the threaded inserts holding the parts together. It's designed to be quite robust and has a 23deg angle for the…
QUENA instrumento musical andino escala 1/1. La quena es la flauta más popular de Hispanoamérica y, posiblemente -así la considera el gran musicólogo argentino Carlos Vega-, el más famoso de los instrumentos aborígenes americanos.…
Well this escalated quickly with regards to number of hours spent... But now I'm finally happy with the result. This top nut uses true fretboard radius, default is set to 12" but this can be changed as everything else. Enter dimensions of…
Yet Another Headphone Holder, there's nothing special about it when compared to anything else you can find, just that it's Mirumee branded. You can clamp it to a thick desktop, like 36mm, the part on the desk is low profile so you should…
Heavy Duty Ukulele or Banjo Instrument Wall mount hidden Screw Design. Fix bracket to wall then slot mount over - MUST print bracket laying down so layer grain runs the length or bracket MUST print the mount standing up. If not, I can not…
The Traktor Kontrol F1 is a micro DJ controller dedicated to controlling Traktor Pro’s “Remix decks”. As I’ve gotten one of these puppies just recently, I knocked up a stand for it. It’s 3 seperate parts, printable on smaller 3D Printers…
Print and sing.
Musical Instrument
Castanets , also known as clackers or palillos , are a percussion instrument .
Instrument holder for a boost pressure display. printed with tree supports in 0.2mm and 100 infill. Mount for a boost pressure gauge with 52mm diameter. The design is not mine and was only adapted for the diameter of the boost pressure…
Two guitar pick designs, one plain and one with Pi on it because it looks cool. I've tried and designed many different picks but these two are the ones I keep printing and wear well over time. They sound more natural the more you use them…
A glass front for my Flight Instruments to increase the realistic effect. UPDATE 2022-12-24: Larger screw holes Ø 79mm x 0.2mm transparent foil needed. Fits to: Variometer for Flight Simulation Airspeed Indicator for Flight Simulation…
Updated wire channels and added a single file for download. My project contains six plates that combine to the full instrument panel of a Cessna 172 cockpit with the necessary bezels. The panel is placed on top of an LCD screen-monitor…
This is a replacement gear indicator needle for the instrument cluster in a 1973-1987 Chevy/GMC truck, and Blazer/Jimmy. It also works in the 1973-91 Suburbans. This is a common weak spot in these vehicles. I recommend printing this in…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Kit can be purchased here:…
The design is inspired by an ancient Greek bullroarer. Instructions: Cut a piece of string that is at least 50 cm long. Take one end of the string and tie a knot around the bullroares hole. Ensure that the knot is tight with no clearance…
This free 3D model is based on Dorothy , the iconic weather research device from the 1996 film Twister . In the movie, storm chasers use Dorothy to deploy hundreds of small sensors into a tornado, hoping to study its inner workings and…
Made this quick flute stand so my wife could display and store her flute on the shelf. Easy print, no supports or raft needed. I used PLA with 2 shells and 15% infill no trouble. If you make this item Id love to see what colors you use…
Here is a duduk in C, it works with any duduk reeds. if you print it in 2 part you have to glue the two part to reduce any air leaks. Have Fun ! Category: Music
Print the cello and double bass adapter with TPU with 100% infill. I used Filaflex 82A For the pencil mic adapters both PLA and PETG work. No supports, only the 170 version doesn't print very nice but is still okay. For the cello, my…
To make the electrical contact between the different battery slots, it's necessary to insert 2 paper clips at height 11.2 mm. This pause is included in the 3mf file. Holes in the body allow to test the electrical voltage path along the 3…
Introduction: I f you decide to learn to locksmith, ( and I suggest you don't ), you will likely encounter many small microscopic parts that attempt to dissappear into the ether right before your very eyes. They are there one minute, and…
Here is a model of a large linked chain sized enough it can be worn as a necklace or used as a decoration. For printing, you will most likely need to add a brim for printing stability. A 3mm brim with 0.2 gap seemed to work fine. Also,…
Hello, i designed a simple pin organizer for the pins of locks. Enjoy :)
Randal at his instrument panel Monsters Inc.
I had the instrument cluster speaker go out on my 2018 Tiguan. The speaker is what makes the blinkers click sounds and seatbelt dings and whatnot. In addition to not being able to hear alerts and the blinkers, the car will also disable…
Fits the Pirastro round rosin Screw-on lid to keep clean 3 deigns of the lid Hollow bottom so the brand and type of rosin can be seen Easy print
LEGO Musical Instruments
A school project by myself and a colleague. A PVC-pipe instrument inspired by the Blue man Group and the youtuber snubby j. Category: Music
Instrument Panel Cover for Subaru Impreza GC and Subaru Forester SF, fully compatible with the 66813FA000 item. It comes with STL, 3MF, and also STEP files for customization.
The Helm of the Isshurument. From the graphic novel 'Deverish Also' This is a wearable design with a pivoting visor. I designed it to fit my lager than average head, so you will probably want to scale the files down a bit to better fir…
print the files and glue the gear to the stick
This is an upgraded back for the TI Programmable 57 calculator. With an original MSRP of $40 in 1977 (over $200 in 2022 equivalent buying power), the TI Programmable 57 calculator was designed to use 2x NiMH 1.5V batteries connected in…
No, it's not a spacecraft ;-) EWI - electronic wind instrument project shell/case/housing This can be a shell for your individual EWI project. There are several different EWI projects out there on the internet for inspiration. I designed…
This version will not be updated anymore. If you want the most recent version, check version 4 out here: https://www.printables.com/model/343896-playable-3-string-ukulele-like-instrument-v4 I designed a new instrument that is meant to be…
Maracas per bambini. Ho creato questo strumento per mia figlia con disabilità. Essendo di un diametro giusto per le dimensioni della sua mano e con un manico più lungo di quelle in commercio, riesce a farle suonare. Stampata in più…
Edit: Just got a iPhone 14 Pro with case and if fits fine. Hello, this was a much longer build than I anticipated. There are Multiple versions. This mount is made to hold almost any phone up to 150mm tall. but you could always lengthen…
This is a housing for the Raymarine i70 range of instruments if you want to mount as stand alone instruments. Print 100% infill .20 Drill template has also been included.
A foonki designed by Linsey Pollak. All dimensions for this project are based on his PDF on how to make this design. This is a work in progress, and I will be updating accordingly to further get the tuning correct right off the bat from…
This is a box for meteorological instruments (such as a thermometer or a hygrometer) that protects them from sunlight, water, snow, and strong winds. This box is based on a prior design I made and uploaded here . After days of frustration…
Easily modifiable HSW Honeycomb Storage Wall Powertools, instrument holder or just a box. Pegs are adjusted automatically depending of the box size and you can choose in a 3x3 grid which ones to enable. Under Change parameters you can…
After a long search, no such solution could be bought or found anywhere nearby - a simple, but robust, solution to transform my ordinary lyre into a 'smarthpone' version. So decided to design, mix and match anything myself. And here is…
The Güiro is believed to have originated in Puerto Rico with the Taíno people, the indigenous peoples of the Caribbean in the 16th century and beyond. The earliest recorded reference to the instrument was in 1788, by a monk and Puerto…
This model is compatible with the lego system.
making felt cushion felt washer punch jig chromatic button midi keyboard https://shop.yushakobo.jp/products/consign_giabalanai
a handle for the covert instruments practice core to be held in your hand. must be imported as imperial not metric.
I printed it on a Ultimaker2+ (0.4mm nozzle) oriented like a dome with tree support. (Please share your Makes and give me some feedback or suggestions. I'd really love to see your prints, because it's my first 3D-model.) Kind Regards…
This model is compatible with the lego system.
I made this holder for the Covert Instruments lockpicking practice core, because the core is not very comfortable to hold in your hands. This print should make it much more comfortable. I made two versions; one is slightly shorter so you…
This model is compatible with the lego system.
The design consists of two to three models depending on how you want to print the design. As shown in the picture below the main red body is attached to the amplifier by the original two screws . Then the rails in turquoise color are…
Cover for electronics of a BMW e46 instrumer cluster conversion for sim racing The great project to convert a dash to sim racing from: https://neuros-projekte.de/simulator/bmw-e46-arduino-simhub/ There are mounts on the back for a desk…
Gioco Musicale per bambini. Stampare n° 1 manico e n° 2 parti laterali. Ci sono 2 versioni di manico, una per i bambini sotto i 3 anni e uno normale. La versione per bambini impedisce di spingere il manico in profondità in bocca e i fori…
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and…
This is my 3 string instrument called a Triotune. It is similar to a ukulele, guitar, cigar-box guitar, balalaika, or Appalachian dulcimer. This instrument is modular so you can customize and swap out parts to fit your needs. The new…
Made this for my guitar HSW, you can find more music accessory models on my profile . Fits into a standard HSW insert, most ¼" jacks (6.35 MM) should securely slide all the way in. The input hole's diameter is 6.5 MM, worked perfectly…
Don't forget to like and comment. Principle visualized: get the instruments that you want and group them to build the instrument panel/button box that you need. See pdf for measurements. Material: 4x M3 Bolt and nut for each instrument…
Slim kazoo musical instrument Musical instrument suitable for everyone. No musical knowledge is required. When you sing into it, it produces the typical buzzing sound caused by the vibration of the membrane. Assembly instructions Cut a…
These switch covers for the Mercedes Sprinter W903 offer a snug, secure fit—requires firm pressure to install properly. Printed in ABS-GF with 3 walls, 15% gyroid infill. Supports optional, but recommended for best results. Available in 3…
Kazoo 2025: the easy and fun musical instrument A musical instrument suitable for everyone No musical knowledge is required. When you sing into it, it produces the typical buzzing sound caused by the vibration of the membrane. Make the…
just superglue clip part and mic part each other
Still working on optimization for printing. Will update with a V2 once I figure that you.
This is an oud this a short-neck lute-type, pear-shaped, fretless stringed instrument there is a thin one (easier to print less plastic and the one i printed) and a fat one (bigger and more close to a traditional one) you will need two 2…
This is a print-in-place model for a small carrying case for the Covert Instruments Covert Companion. It fits the Covert Companion with Turning Tool Expansion Pack with plenty of room to spare for more expansions or foam to keep it from…
Want to make your own Woodwinds instruments like recorders or ocarinas? Simply model a 3D shape around the windway you want and then subtrack out the windway or fipple and you'll get a perfect wind instrument every time.
UPDATE: Added a pegboard version of this mount using Sy's Peglock System design. I picked up an AMES Instruments 12:1 infrared temperature gun from Harbor Freight (the $22 model) and couldn't find a stand or holster for it so I designed…
Holds 60 odd mini hex bit drivers plus handle, other instrument screw drivers, pens, exacto knife etc… Nice and compact organiser.
A Ikea Skadis holder for Texas Instrument calculator with external hooks after the idea of another thingiverse collection (https://www.thingiverse.com/thing:2853261, IKEA SKADIS Collection (easy print / tight fit)). The hook allows a…
Peg Board holder for Sharpie, Pencil, Carpenters Pencil & Pen Printed in leftover PLA I had (Don't mind the pink :)) Print with supports touching buildplate for pegs. Print in orientation shown. .16mm Layer Height with 25% infill. If you…
Texas Instruments logo in 3D. 5mm high.
Voici ma version du Kokiriko , inspiré d'un modèle original. Le kokiriko est un instrument de percussion idiophone traditionnel du Japon. Il s'agit de petites lames reliées par une corde, avec deux poignées aux extrémités. En agitant…
Hello This is a straight version of a bass serpent however in soprano size. It has been modelled in Catia. The model had been cut to be printed in smaller part. it shoud work with any standart trombone mouthpiece. I will publish an…
Had my loose cables always stuffed into the side handles of my 4x12 cab until I was looking for a new procrastination reason, which I soon found in the idea of a Marshall Cabinet Side Handle Instrument Cable Holder, or short MC Shich. You…
These part replaces the two briggs from the dashboard for the instruments. Print Settings Printer: Prusa i3 MK3S (MMUS) Rafts: No Supports: No Resolution: .15 Infill: 15%
I made those stands for Native Instrument Kontrol S2 MK3 as tables are always too low! STL is plain, it is up to you to “infill” it with your pattern of choice. With PrusaSlicer, import STL and remove top and botom layer, set Perimeter to…
Remix du model de SCBR Impression en PETG 50% support: plateau uniquement
Full details and a build guide is on Instructables! Electric Musical Instrument 3D Printed Amplifier . Print with your favourite thermoplastic | http://e3d-online.com/All-Filament Love 3D printing? Love T-Shirts? Then you need to check…
This Instrument panel fits the 2.7m (106 Inch) version of the VQ-Model Pilatus PC-6 Porter. It replaces the ugly cockpit that comes with the ARF kit. The holes for the screens fit 1.8 inch arduino displays - you know what that means ;)…
