Liczymy pasujące modele…
I couldn't find any other designs that could fit this switch so I made my own. This design is for the v2 version that has 3 holes in a triangle pattern. The v3 chassis of the switch has 4 holes and looks slightly different. Check the…
Updated models of a slightly larger size have been added for a tape width of 25 mm. An experimental mounting option between the two halves of the case is also being tested. BOM: 7x M3x10mm SHCS/BHCS 7x M3 Nuts Print Settings Rafts: No…
A pair of brackets to mount a Netgear GS110TP POE-switch into a 10"-rack. As the switch is a little wider than the mountig rails in a 10-inch-rack, the switch is actually mounted behind the rails with a little gap to accomodate the cage…
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
Starší, ale jednoduše tisknutelná verze krytu zadního světýlka na moped Stadion S11/S22. Sklíčko pasuje a drží bez dalšího spojovacího materiálu. Fotografie ilustrační.
I found various examples of mounts for this switch but all were bulky, used a ton of filament, or didn't use the factory mounting holes. I had one of the original metal ears that came with the switch and used it to model these. The result…
This is a simple, easy-to-print base stand for the RALENO PLV-S116 LED light. The stand gives clearance to the knobs on the back of the LED light, and with the smaller size, makes it very easy to pick up the LED light and make adjustments…
I just started playing around with Fusion 360 yesterday and created brackets for my 10" Rackmount.
Gedruckt in PETG mit 3 Rändern und 0,15mm (oder geringere) Schichthöhe. Keine Stützen erforderlich. Neu! Modell mit Schriftzug wie beim Original hinzugefügt.
Pioneer S9 crossfader external fader cap stopper by Flavour G'z Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1 Infill: 100
My friend broke the original handwheel for his SIP wood lathe and was distressed to discover from SIP that the part was unavailable. 3d printer to the rescue... I took measurements from the original wheel and made modifications to the…
Die Winkel ermöglichen die Montage von Zyxel GS1100-16 V3 Netzwerkswitches in 10 Zoll Netzwerkschränken.
Der Tischeinsatz für Sägeblatt der HS115 von Scheppach ist sehr instabil. Ich habe ein stabileres Teil konstruiert und das bestehende dadurch ersetzt. Jetzt ist die Auflage Fäche stabiler und es ist möglich auch schmale Streifen zu Sägen…
I had a couple of the body clips on the headlight trim break on me so I modeled up some replacements. These print on their side with no support needed (I modeled all needed supports), you way want to add a brim. Material: ABS Wall loops:…
This is a simple oil filter 1/2" socket adapter for a 97' Diahatsu Hijet. Filter part number: 16510-81403 and 15601-87703 Shape 14 sided, flat to flat distance of approximately 63.8mm I printed it in Black ABS with 5 walls and 50%…
Some Rack Ears for the Netgear GS110EMX Network Switch to mount in a 10“ Rack. Two Variant are available to mount. The normal 1U Variant and the weird 0.5U Version. In my Case it worked perfectly but it may not in yours… I would suggest…
Remixed with a couple modifications from the original design by Tchitchi . Flipped X axis to give access to the charging ports on the other side for wired operation. Widened the screw-mount hole to accommodate the original Raleno hot-shoe…
This is a remix to put them all inside a case.
Lever for the MY 2010-2016 and it is not possible to get a spare part so i designed one. Print with PETG or better materials for heat resistance and strength. Print with 7 perimeter and about 50% infill. Print with the fillet on top and…
A wiec projekt magazynu z ogniw LG NCM model LGX E78 jest już zakończony tak więc finalna wersja projektu jest już gotowa do pobrania. Kilka spraw: Projekt jest dedykowany do zmieszczenia w nim 11 ogniw (jest to system 14s11p), wysokość…
Replacement blade guards for the Holy Stone HS110D drone. This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/4WQfgeMsyr4 or on https://onshape.com https://cad.onshape.com/documents/5e07cdd1e8e8ad007a0ee078…
Wall mount holder for any 1-bay NAS.
10" Rack Netgear GS110EMX mount
držák zadního světla na moped S11/S22.
See https://www.amazon.com/AMS1117-5-0-Step-Down-Voltage-Regulator-Module/dp/B078BCCDN1/ref=sr_1_7_sspa
1U (actually 2/3 of 1U) bracket to mount a Netgear GS110MX switch (10gbps, unmanaged) in a 10 inch rack cabinet. Do not print in PLA. The heat and the weight WILL eventually deform it. I printed it in PETG with no supports. First mount…
I needed a holder for a Netgear GS110 to fix vertically on the SKÅDIS pegboard. It also fits other Netgear GS1xx series. It uses a dovetail system (see below) removing the hassle of those pegs. It's a tight fit. I added a file with…
This is a 6.5" speaker mounting ring that I designed to go into my '97 Diahatsu Hijet doors. Note that the window does not interfere with this location and there is plenty of depth for fairly deep speakers. I used these for the generic…
This is an add-on for the Tool-Check Modular from the Wera Advent Calendar 2024. It can be easily inserted into the existing rail. It is suitable for the following S11 LED flashlight. (RovyVon A5) The head of my lamp has a diameter of…
This frame was developer from Hirates. https://m.facebook.com/HiRatesFPV/?locale2=de\_DE HS1177 FPV Mount for EGODRIFT BLACKPEARL 4MM FPV Frame: https://www.egodrift.com/shop/frames/blackpearl-frames/blackpearl-4mm-edition-frame.html…
Switch ears for NETGEAR ProSAFE 16-Port Gigabit Ethernet Switch (GS116NA) Attaching one with M3 screw holes and M5 screw holes. Category: 3D Printing
Modified slightly to move the switch a bit further back so this bracket can be used with Natalie T's reworked 10 inch server rack. https://www.printables.com/model/1090551-modular-10-inch-server-rack-reworked
věšák ... připraveno po vytisknutí bez podpor. Snadná montaž pomocí 2 šroubu....Dvě verze
I needed a lightbox to use to photograph old negatives on so i created this simple frame to hold the Raleno LED photo light flat. This is the light its made to fit - https://tinyurl.com/5czctcud
Holder made for Mercusys MS110P, 10-Port switch, 8-Port PoE+ to be mounted in standard 10" rack. Switch can be mounted with screws thru standard wall mount holes but does not need to. Fits pretty tightly. Printed facing down and at 45°…
Printed in transparent polymaker PETG, max 15mm/second print speed makes the diffuser clear but transparent enough. Prints without supports. I used a archimedean curve on the external face which looks pretty cool.
This is a Remix of @Nightfall_536744 rack ears for the Netgear GS110EMX switch. This remix updates the design to fit with @Mauker “ 10” 3D Printable Rack Mount System ” It also adds a cut out to accommodate the GS110EMX optional rubber…
O'scope came with 4 color bands, none of which matched the dark-blue of channel 4.
I have a set of four Bessey EZS11-4 clamps (they are sold in packs of two) and needed a wall mount for them. I drew up a quick design in F360 and used 3mm countersunk screws to bolt it to my tool wall. As the clamps are really light, I…
Simple print, these two brackets give the scope a slight downwards angle so that it can be mounted higher up (I have mine over my monitor). The scope clicks into these brackets and is very firmly held in place. Let me know if you like…
I wanted to have a Switch in my 10" Server rack, and this one was the perfect size, tho it only came with 19" rack mounts. This model uses the original screwholes & screws to fasten, and can be easily installed in your cozy home 10" rack
Uchwyt montażowy do przełącznika internetowego model GS1100-16 Zalecam drukowanie z dużym wypełnieniem i użycie mocniejszego materiału.
An adjustable angled camera mount to hold the common HS1177 FPV camera onto the DL180 Quadcopter frame. Requires no holes or screws to hold in place. Uses the standard HS1177 Screws to hold the camera. Print instructions Category: R/C…
I wanted to get it modeled and posted, just in case somebody lost theirs. Not sure what materials would be best for engine temperatures. A piece of steel or brass could be used to replicate the stick and the handle could possibly be made…
These are the end caps for the hollow top rails on the tailgate and bed sides of an S110P Daihatsu Hijet Japanese mini truck. These end caps are often damaged or missing on older mini trucks and it may be difficult to source replacements…
This watch came with a garbage resin strap that broke after a couple years, this adapter lets you replace it with a nato strap (without having to buy the one that costs nearly as much as the watch).
This is the version of this model for normal network cables. There is a shallow version here for flat network cables. I recommend printing at 100% infill and with a raft or brim for best support.
CZ Těsnění pro karburátor legendárního mopedu stadion s11 a s22. Tiskněte z TPU nebo jiného flexi materiálu (doporučuji otestovat zda se nerozpouští v benzínu). výplň 100% ENG Print out of TPU or other flexi material (I recommend testing…
Replacement cover for carrier Stadion S11
Got tired of accidently pressing the AUTO button and decided to do something about it.
Dip stick for a 1982 Yamaha XJ1100 motorcycle for middle and rear units. I believe it fits the XS 1100s too. Based on measurements I found online because I didn't have an original. I don't remember where I looked up the dimensions. Use…
Made for 35 mm stands with 5mm diameter and generic HS1177 camera. Cca 20-25 degree tilt. You will need to adjust the holes with a drill after print. Print instructions Category: R/C Vehicles Print Settings Printer Brand: Prusa Printer:…
I created this phone mount base for a phone mount that I bought, since the original clamp mechanism didn't clip on my dash properly. This base is made to fit into the rightmost dash bolt hole. Just remove the cover and the M6 screw.…
Hy there , Because Eufy wasn't willing to sell me a replacement part for the Vacuum cleaner (weeks after purchase) I designed my own Wall mount to make it tidier. I think the cornerpart isn't for most of you, I also glued it to the rest.…
If you like this model and use it please upload a like, it really helps others find it! I hated having my scope on my desk and the cables getting in my way, especially when not in use, and I already had a “portable” touch screen mounted…
Tryska k BODY S115 AUTOSEAL
This is the shallow version of this model for flat network cables. There is a deep version here for normal network cables. I recommend printing at 100% infill and with a raft or brim for best support.
Here is a set of simplified meshes of the dash of the '97 Diahatsu Hijet S110P. These are cleaned up and simplified meshes, I had to perform quite a bit of post processing since the source files were hundreds of megabytes. I used MeshLab…
I do not have a CS-LITE, but I do have a Raleno PLV-S116. So I modeled this mask that is compatible with the rest of the parts in Evan Dorsky's 35mm Film Carrier…
Made for M2.5x3mm hex screws with a flat thin wafer head (5 mm diameter). Should be printed with the finest possible layer height and ironing. I used matte white PETG for mine (noname brand).
This is my first model ever created so the fits are pretty spot on. The STEP file is included if you want to make any changes or increase tolerances to your liking.
A small clip that can be attached to the tube of the Eufy Homevac S11 Go, to allow you to carry two accessories on the vacuum. Works great for bringing the crevice and brush tool around while you move around the house. Attaches using 2 ¼"…
for Connfly DS1110 connectors or similar - FC6842xx, MIC32x ... screws M3x10 to M3x12 and nuts M3 4pcs Category: 3D Printing
Needed a small PCB support foot for ADS1115 pre built module for on my Pmux module PCB. So it would not accidentally bent down. Printed on Bambu X1C - 0.4 Nozzle - 0.2 Layer - ABS No supports needed
If you want to get the focal plane of the telescope as close as possible to the secondary mirror, you can use this modified printed front piece together with the following extra short focuser:…
This is a mod to the DBS114 Astrograph . The new rear tube section has a threaded hole to which you can attach: a funnel with an 80mm fan; a cap to close the hole, if no fan is needed. The funnel supports an 80mm fan (e.g. a Noctua NF-A8)…
This is an all in one FPV mount for the Nano Skyhunter, it might work on other planes. It is designed for a standard HS1177 FPV camera, a Matek VTX-HV, including a mount for the SMA bulkhead that comes with the VTX. I glued it to the deck…
FT Super Bee (Speed Build Kit Edit) camera mount for RunCam Swift, HS1177 or similar style camera. This provides the extra clearance to account for the double layer foam board AND the plywood doubler in the speed build kit for the FT…
"Introducing a sleek, minimalist solution to keep your Eufy Homevac S11 battery (model T2501) organized and accessible! This versatile holder is designed to be easily mounted on both pegboards and walls, providing a perfect spot for your…
Preparado para imprimir a todo color
This is a adjustment knob for a Dometic gas stove specifically the HBS1102, it might fit other models as well. I reccommend printing in a fairly heat resistant material as it might get warm as you are using the stove. I also reccommend…
A wall mount for the Synology DS118, so you can hang it on your wall.
DIN rail holders (for 35mm rail) Print instructions PLA (flame retarding filament is suggested) 0.6 nozzle 0.2 layer 100% perimeters or 100% concentric infill Versions Single Double (second relay is rotated 180 degrees for cable mounting…
This is a motor mount I designed for my Harrier s1100 flying wing.
Hi!! This is a support to store the FoodSaver VS1192X over a shelf. I use this pump to vacuum packing my filament spools :) The support is designed for a 55mm width shelf… I include the Fusion360 file :)
I've creating an adjustable mount for variously spaced mounting holes is a clever solution, especially for networking equipment like the Netgear SG110TP. This design not only provides versatility in terms of the different sizes it can…
This is an adapter to install an hs1190 (foxeer arrow in my case) on a Fatshark pan and tilt. Print Settings Printer: Anet a8 clone Rafts: No Supports: No Resolution: 0.4 Category: R/C Vehicles
The PNI Safehouse HS110 gas sensor came with a wall mount and I wanted it placed on a table. So, here's a stand for it (version 2 has a bigger USB cable cutout for chunkier cables).
KST DS113MG Servohorn für Leimbach Hydraulikventil. Das Servohorn muss mit etwas Kraft auf das Servo gedrückt werden. Es Handelt sich hier um eine Presspassung. Das Servo muss auch etwas am Gehäuse angepasst werden vor dem Einbau in das…
cooling pod for vtx in (looking from front) right hand equipment bay of s1100 harrier. theres a hole in the top to allow a pigtail sma to bolt in. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill:…
An Adapter to assist with measuring String lines for Kerb Machines. Mounts onto the standard GLS115 Leica Mini Prism Pole.
Mount bracket for Hasivo S1100WP-8XGT-SE switch. Replace original screws with 4x M3x6 (don't use longer ones to avoid internal damage) and few (2 is enough) wood screws. Switch is mounted upside down to make it easier to unplug ethernet…
The wall bracket can be fixed with screws, nails, or double-sided tape. If there are any requests for updates, such as adding a screen or space for cables underneath, I would love to hear them. This bracket is designed for BSIDE models…
I designed this for my professional workspace which contains multiple computers where administrative policies dictate screen timeout. Suspending the mouse over a clock creates continual (or once per second) mouse events. My clock…
mount for runcam split for nose of reptile harrier. print in tpu there is 4 holes in back to mount pcb use spacers as required to allow the pcb to sit with its connectors. fits under standard nose cone Category: R/C Vehicles
Adapter for GLS115 Mini prism Pole to Rampmount Tablet Claw
Da das Glas der Kamera bündig mit dem Rand ist, steigt die Gefahr dass das Glas bei einem Sturz zu Bruch geht. Dieses Risiko soll mit diesem Ring verringert werden. Der Ring lässt sich am besten im Druckwarmen Zustand anbringen und hält…
The main goal of this design was to add a kickstand to my TD8680 Digital Gaussmeter for easier viewing. Along with the printable parts, you'll also need: 4 M3 hex nuts (pressed into shell) 4 M3 x 5mm bolts The main shell was printed in…
Zalman CNPS11X 120mm fan mount.
This aperture mask is designed to fit onto the mirror cell of the DBS 114 by Dave Aldrich:…
This is a HS1177 (and compatible) mount for Martian II (Alien Clone) quadcopters. Print Settings Printer: Prusa i3 Mk2 Rafts: Doesn't Matter Supports: Yes Category: R/C Vehicles
Its just the small holder on the side of the brush. The inner part fromn the original got some ball bearing but this is not necessary.
Added a wider screw hole as my screws were larger than the original
Monitor di sistema per Windows 11 con monitoraggio in tempo reale di CPU, RAM e GPU, ottimizzato per basse risorse e prestazioni fluide in background. Include installer per utenti finali e codice sorgente per sviluppatori. Files…
Replacement bushing for a Nextool S11 Pro. Requires a T9 torx bit to take apart.
Needed a cupholder for my partner's electric piano so I remixed this fantastic cupholder to have a ~100mm clamp opening, as well as 2 holes allowing me to put in a wedge to fit the profile of the piano. Use the screw, plate, and cupholder…
