44 modeli
Support pour ne pas gêner la sortie d'air de la Livebox dans ma baie de brassage. Support so as not to obstruct the air outlet of the Livebox
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Zyxel GS1200-8 10 inch rack mount, remixed from the excellent model by Chillora. The remix introduces rounded corners and a centered slot to match the “rounded” rack look. Recommended to print in PETG for high thermal environments with…
I recomend you to print version V2 it has fixed problems. I have wanted lens hood for my Panasonic Lumix GX880 with default lens H-FS12032. It is really hard to get them and they are not cheap, so I designed it and 3D printed it. If you…
There are already a few 10 inch rack mounts for Zyxel GS1200-8 (and GS1200-5), but this one has some unique features: As slim as possible, to squeeze it into small spots. The holes fit between the 0.625 inch and 0.500 inch sections…
This is a box for my ES120 electrical screwdriver, a normal screwdriver and many 4mm hex bits. It also contains 2 chambers to store some loose screws and other things in it. There are also 2 small lids which fits onto the chambers. When…
Angled / Vertical Holders for LiPo Chargers from ISDT and Spektrum for a Tidy Desk Organization.
This is a mount for the Zyxel GS1200-5HPv2 network switch so it can be mounted in a 10 inch rack. The mount is 1U high, and the switch mounts flush with the front. The total depth when mounted in the rack is no more than then depth of the…
From Thingiverse: Hi, holder to install an HP server PSU DPS1200 fb into an ATX PSU form factor. Enjoy ! Print Settings Printer brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament brand: amazon Filament…
This is the high-performance, high-noise version of my desk fan — designed around the Arctic S12038-8K , an 120 mm industrial fan running at up to 8,000 RPM . Compared to the Noctua-based versions, this thing is in a completely different…
Sadly the opening in the battery cover is not big enough that a USB plug can fit. So you have to source some small barrel plug socket and jack. I used a 4mm Socket that I had laying around. The .stl file I provide here has just a 4mm hole…
A holder to mount a ZyXEL switch onto a Skadis board. To mount the holder to the peg board, use these T-nuts .
Mount Zyxel GS1200-5HP v2 in 19inch Rack
I really liked the original ESRack system design created by @EvilProphet . I created a module for Zyxel Switch GS1200-8 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
A generic 10 inch 1U Rackmount for the Zyxel GS1200-8 i bought for my Lab Rax. Locks the switch in place without requiring screws, allowing it to be mounted in virtually any orientation. Upside-down, hanging in a rack or standard vertical…
Just add it on top of the other, no screws or glue needed. I printed it on Polylite PETG.
Sim Rig - Pedal face plate - Najam Simtec S120 If you're like me and racing with socks. This pedal face plates give you the all the grip you need, some might call them the "sock eater" ;) Features: Nice grip on your pedals. Mounts to all…
If you like this model and use it please upload a like, it really helps others find it! I hated having my scope on my desk and the cables getting in my way, especially when not in use, and I already had a “portable” touch screen mounted…
Holder for 10 4mm Bits for the great ES120 Electronic Screwdriver. Best printed in TPU or other flexible material.
Simple little adapter to hold an ES120/ES121 electric screwdriver on an Ikea Skadis board. Prints completely without supports, and attaches using the Skadis T-Nut system . For assembly, you will need a M2.5 nut and bolt. I used a M2.5x12…
1:1 Nachbau der originalen Einfädeltaste
Makes it both easier to click the button and hold on with more torque than naked. Should fit the ES121 also. I think I remixed the design from somewhere long ago, but now I can't find the source. The addition of a locking ring is my own…
Ich wollte meinen neuen Youless LS120 nicht am neuen Stromzähler ISKRA MT631 ankleben. :-) Daher habe ich eine einfache Halterung konstruiert. Die Konstruktion in 2 Teilen ist erfolgt, um den Druck ohne Support möglich zu machen. Die…
A set of replacement fences for a Festool KS120RE (also fits REB). These aren't exact duplicates of the OEM one, and don't have a locking lever, but they friction fit quite well. I printed in Silver ABS - I do not recommend using PLA for…
Dieses Teil wurde modifiziert um ein ausbrechen des M3 Gewindes für die Umlenkrolle zu verhindern. Außerdem hat es im Filmkanal eine eckige Aussparung für die Aufnahme einer Reflexlichtschranke DY70. Das Kabel für diese Lichtschranke kann…
Features: Holds 18 28mm or shorter bits (+1 with screw driver), design with 3mm holes at bottom to slot-in magnets if bit become too loosen. Hole to charge screwdriver when case is closed Hold 1 extended shaft Multiple slots to add magnet…
I needed something that can fit both network devices so i combined them :)
1U 19'' Rack Mount for Zyxel GS1200-8HP Managed Switch and its Powersupply
Rackmount ears for Meraki MS120-8FP, Meraki MS130-8X and Meraki MS130-12X (23cm wide) Meraki MS120-8, Meraki MS120-8LP, Meraki MS130-8P and Meraki MS130-8P-I (22.2cm wide) switches. The ears attach to the built-in wallmount ears of the…
Fits: Zyxel GS1200-8 — 155 × 85 × 26 mm. Print settings Print it face down — front panel flat on the bed, tray pointing up. This is the one thing that matters. Printed upright, the top edge of the cut-out becomes a 157 mm unsupported…
Multiboard mount for a Zyxel GS1200-5HPv2 5 port managed POE switch. Parts for both the switch and the power supply. You will need to print two of each. Printing Guidelines: I printed using standard Multiboard settings. Use 3 perimeter…
This is a mount for the Zyxel GS1200-5HPv2 network switch so it can be mounted in a 19 inch rack.
I made a USB-C mod for the Miniware ES120 electric screwdriver. The endcaps for Revision 1 and 2 of the PCB look nearly identical. Make sure to use the correct one for your revision. https://gitlab.com/XenGi/es120-usb-c-mod
Threaded inserts: M3x5x4
A set of printable parts to mount the MiSTress1200 board (from 8bits4ever) in an Amiga 1200 case. These are not the official STLs, they've been recreated from scratch by taking measurements (which are likely not as precise as the…
https://cad.onshape.com/documents/f1d84935c189b4e6ca6b77e4/w/97386357dcd7eadf47824a91/e/eadc890d8ac4e32ea81bc50b Retaining feet that can be mounted to a surface to stop the oscilloscope from sliding or moving
Recommended material: PETG or ABS (humidity resistant) Layer height: 0.2 mm Infill: 15–25% Supports: Yes Print orientation: As provided in the STL
https://cad.onshape.com/documents/34276c57ab8f636678834ea4/w/05c7eabcec21066782991bd5/e/58356f4aac95f63cfb5567c9 A cover for the calibration and ground reference terminals on the siglent sds1204x-e
The original keyboard uses a different part for each side, but I've been using this one for both sides without problem. 3D printing parameters: 0.2mm layer height 0.4mm extrusion width 3 walls 15% infill No suports needed
Male dovetail mounting bracket for CBE line of campervan / motorhome electrical panels e.g. DS300 DS120 BC122 CB516. These panels can be clipped to each other but require screw mounting legs for the ends and middle.
A bracket I whipped up to suit a GW-CRPS1200 being used in the awesome NexGen3D DIY Steam Machine REDUX case. This PSU is sold on AliExpress and marketed for use with the BC-250.
Male dovetail mounting bracket for CBE line of campervan / motorhome electrical panels e.g. DS300 DS120 BC122 CB516. These panels can be clipped to each other but require screw mounting legs for the ends and middle.
Simple little adapter to hold an ES120/ES121 electric screwdriver on an Ikea Skadis board. Prints completely without supports, and attaches using the Skadis T-Nut system . For assembly, you will need a M2.5 nut and bolt. I used a M2.5x12…
![[UPDATED] Camera Hood for Panasonic Lumix micro 4/3 default lens H-FS12032](https://media.printables.com/media/prints/43365/images/431083_7c6d97a4-327e-417d-b5ff-e75166a1d827/large_display_camerahood12-32_g2_v2_43365.png)
