Liczymy pasujące modele…
I designed and 3D print a dust cover located on the right side of the curricular saw that makes the dust extraction much more effective Starting from another similar project , I designed the same part but adapted to my TS55 REBQ version.…
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw Inspired and adapted from…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
Replacement adapter to 36mm cleantec hose. It does not swivel, preventing the hose to get stuck on the rails. The side panel of the tracksaw needs to disassembled to install the new adapter.
Wydruk około 2,79 €–3,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right. Festool saws have different widths so use…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
I was needing a part to connect a vacuum hose to my circular saw to extract wood chips and dust I designed the part in Fusion 360 with a female connector to enter the circular saw exits and an internal screw thread for the vacuum hose I…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
TS55 cover: Remix gcode to reduce the amount of support needed.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Jednoduché skladné stínítko pro náhledové monitory Feelworld 5,5" Po vytištění opatrně odlomit bočnice od vrchní části a odřezat podpory a límce Simple foldable sun shade for video monitors Feelworld 5,5" Print it with PETG 0,2 mm , rafts…
Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UNITEC Monaco USB A/C Steckdose Abdeckung auf Jung AS55 Rahmen.
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a dust cover for the Festool TS55 FEQ track saw.
Whenever you want to have your Twotrees laser engraver higher...
This is a print in place model designed to print face up at 0.2mm, 15% infil using the designated supports. I've used PLA and ASA and both worked great. I designed this based on designs I tried from here that either fell out, rubbed on…
I modify the version also found owhich does not fit to my festool TS55 REBQ bought in 2019. The left side was correct , but the right side the 6mm hole was incorrect ( 1mm shift). I also improve a border, to be more easily removable, when…
I printed in PLA, any material is ok. Please note than I had to print a new board support in order to move usb cable on the right allowing to put the board on the left. This is needed to shorten the path as much as possible otherwise new…
This model was updated 29DEC2022. Please, DON'T print the previously released files !!! This is my interpretation of the NS Laes / DB Offs55 Autotransportwagen in Gauge1/1:32. Please take into account it's pretty large, measuring over 70…
This is an adapter for the Festool Plunge Cut Track Saw (TS 55). It uses the innovative CAMLOCK connector by @PeterH , along with the jcjames_13009 version of the Festool end connector . Related CAMLOCK Adapter: Festool Domino CAMLOCK…
Milwaukee Circular Saw (CCS55) Rail Adaptor: - Created for CCS55, to be used on Matika track saw rails (but should also fit festool and milwaukee tracks). - The design is intended to be used with a 6mm thick base plate, for the saw to…
You got a Somfy IO rollo blinds remote that for sure does not fit into your Gira switch series Standard 55 frame? Then download and print this file. The frame fits into the S55 frame and can be fixed with the frame to the wall. Once…
Washer nozzle spacer for Changan CS55 Plus, increases the height of water spray on the windshield. The photo shows how the standard washer sprays on the passenger side and how the washer with the spacer (height - 1.6 мм.) sprays on the…
a plain version without text, confirmed fits for the TS55 REBQ and TSC55 KEB.
Sanding belt stand for an RS550 12V DC motor that can be commonly found in many cordless drills. Use M3 nuts and bolts to put everything together. For attaching the arms to the rails you can use hex head M3 bolts and butterfly M3 nuts to…
Karcher WD3 to Milwaukee M18 CCS55 circular saw vacuum adapter Remixed version to match hose diameter. If fits better on one of my saws that other, other requires a round of electrical tape in sit properly tight. Works for me in PLA.…
Every brand has different dimensions for hoses, and some brands have several sizes. This is adapter for Milwaukee CCS55 circular saw to Festool Cleantech D36 hose. The adapter is designed to fit directly on the CCS55 dustport without…
Pretty specific print, extremely basic, I have no idea if it fits anything else. This spindle, amazon- https://amzn.to/382G2za , ali- https://s.click.aliexpress.com/e/_An4Byv Requires 4 M3x8+mm screws. Step file included for alterations
You can use this CAMLOCK adapter to replace the vacuum port on your TS55 EBQ circular saw. Just remove the blade cover with the five screws remove the old curved one and put this in its place, put back the cover and the screws. Plug into…
Dust cover for the Festool TS55 EBQ track saw There is a version for hard plastik and also a version for TPU and other flexible materiel Both just snap in place Print settings PLA Layer Hight: 0.2 mm Infill: 20 % perimeters: 2 layers…
I needed to run a thin kerf blade (1.6mm) on a 2012 Festool TS55 REBQ and didn't want the 2mm thick riving knife placing pressure on the wood or forcing it apart before the end of the cut. I found a lock pin solution by tcatca (appreciate…
A spare part for my friend's Kawasaki JS550 that fits the original lid, tube, and chain. Compared to the original part, this one has a slightly angled tube to make the fuel hose bend to be less extreme, at the request of my friend. As…
Oil filter tool for BMW engines like N20, N52, N53, N54, N55 Simple to print and plenty strong by respecting the limited Z-Axis strength of 3D prints. In my case printed from ABS.
Frustrated with the low cranking amps of the stock battery in my 2018 Mustang GT350R I ordered an Antigravity ATX20-HD lithium phosphate battery with a much higher CCA rating and significantly reduced mass. Because the ATX20-HD is much…
This guide rail base is designed for the Milwaukee M18 CCS55‑0 circular saw, enabling the saw to operate similarly to a plunge saw when paired with a Scheppach guide rail. The Scheppach rail is a cost‑effective alternative to other rail…
Print with the rail mount holes perpendicular to the build plate. This will ensure that the holes are a perfect circle and won't cause issues during mounting. Use Tree Supports (Auto). Only needed under the camera mounting floating area.
Replaces part #241993701
Washer tank lid adapter Changan UNI-S / CS55plus for VAG 6V0955485 Maybe it fits another model Changan Print in TPU 95A No PLA or PETG
Purpose: Caps for sealing/closing off the air intake tube + firewall when the vehicles soundtube is deleted. Main reason for removing this feature of the vehicle is to reduce smells and noise within the cabin. Designed for: S550 Mustang…
I started with the baseline Sovol Zero LCD Case, and then used @Nadir's model of the MKS IPS50 5" Display (https://www.printables.com/model/1307275-mks-ips50-5-display-sovol-sv08-step-file-mockup) and made them fit together. This provides…
This safety switch holder can be installed on any one arm of the S500 or S550 quadrotor frame. It works with the screws
📄 Description: This is a clean, minimalistic silhouette of the S550 Ford Mustang — a perfect tribute to one of the most iconic modern American muscle cars (2015–2023). Whether you’re a Mustang owner, a fan, or just into sleek car-themed…
Printed with PLA strong. Use tree support for the positioning pin. I glued this tool with a small drop cyanoacrylate (1sec glue) on the original depth adjuster.
Used for a s550e that had a missing bracket when it arrived. You can use fusion to adjust it for your toilet. I printed mine in petg 100% infill. Seems sturdy, can really crank it down.
A simple adapter for the Festool Cleantec connector system, such as the one on the TS55 track saw to the Centec hose system.
Purpose: For securely mounting the Valentine V1 Gen 2 radar detector onto the windhsield of S550 Mustangs, without the unreliability of suction cups. I am personally not a fan of suction cups, so I created this. Uses the standard mounting…
For this build, you will need to print 5 main parts and 4 MFT Nuts. Parts: 3 Vertical arms (2 get assembled to make one long) 1 Arm / Brace 1 Base Plate interlocking part 8x M4 Inserts 8x M4 Bolts 10mm long 4x M5 Nuts and Bolts for MFT…
Funnel to refill batteries with distilled water. Otherwise I normally spill
Habe hier ein Absaugadapter für die Milwaukee M18FPS55 Akku Tauchsäge auf das OSVAC Bajonett entworfen. Der Adapter ist sehr passgenau. Habe es mit einem Milwaukee Logo versehen damit es optisch etwas her macht.
Needed a scale for my Lathe Print Settings Printer: Prusa I3 clone Rafts: No Supports: Yes Resolution: 0.1 Infill: 25% Filament: Kjell PLA Red Category: Parts
Requires 4 M2.5 x 6/8 Screws to attach. I recommend printing in PETG or similar to avoid the plate bending over time due to weight.
Remix for an Edimax ES5500M 5-port Gigabit switch. The ES5500M has an odd plastic case and a power connector on the front. This mount is designed to replace the original plastic case completely. You can still power it from the front or…
This mount sits perfectly at the tire inflation kit in my 19 PP1 GT. It reuses the existing bolt/fastener and the lid of that space also keeps the can from bouncing around. It works great with Octanium cans but it was made using…
Cups for organizer with place for label, here is onshape cad model if you want to edit: Insterst_cups | full (onshape.com) If you want to print full set, just print all files (there are multiple copies of same files, for convenient)
Camera transmitter box Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Category: DIY
This is just a quick remix for those that don't want to re-ziptie or wire their motors on a quad to install these motor protect covers. Print Settings Printer: Anet A8 Rafts: Yes Supports: No Resolution: .24 Infill: 15% Notes: Printed…
Not tested Franks55 Franks55 4:59 pm hi please can you help and design a bigger scope cover, the size i need is 86mm it is for a xsight 2 there is on scope covers to fit the x sight II 5x20x85 have a look in Thingiverse under x sight…
Beim Stationsbetrieb in einer Festool Basis um die Tauchsäge dauerhaft betätigt zu haben
This is a balancer for multicopters such as S550, F550 and similars. You can use it when you need to balance the multicopter in order to center the gravity center for an optimal fly and obtain the máximum performance of the motors. Each…
My Motion System for the E3D Toolchanger is very stiff so the switchless end stopps didn't work (or only 1 in 10 trys) so on the endeavor to make them reliable i had this switches at hand mr. Holloway did an great design and i only…
I removed the enter fuel system from my JS550, and needed to mount a fuel filter, so this holds a Baldwin BF833-K2 filter. It's about 44mm in diameter, can't recall the length, but ¼" hose inlet and outlet. It bolts to where the OEM fuel…
Speeds up refilling battery electrolyte
its not perfect but its just a test
Wanted a place to hide my extra efan and other accessory switches. This piece fits into the sunglass tray in the dash of a s550 Mustang. Drops in sits in place no modification needed other than dropping your own holes in during slicing.…
Made slightly stronger as my first set broke after a few uses on the V point.
Replaces default battery plate to mount downward facing raspberry pi camera module.
Stihl FS55 carb gasket for the outer side of carburetor where the air filter attaches. This gasket fits in between the carburetor and the air filter box. Works great on my FS55 Stihl. I used PLA+ and have not had any problems so far. TPU…
This simple LED cover provides the perfect solution to reduce or completely block the bright light of the LED indicator on the Meross Smart Smoke Alarm (GS559A). It is ideal for bedrooms, or any space where the LED light may cause a…
For best print quality use support interface with another filament type (eg. PETG part - PLA support interface layer)
130mm 100mm 75mm 60mm Stencil for painting/Airbrushing decal Suzuki GS550E (just the GS550E) part ! See photos
My locking mechanism for the TS55 at my CMS brocke and I needed a new one. Sadly the fitting one was not available anymore so I ordered another one which is slightly different (10002797). Because the screw layout doesnt fit exactly I made…
Compartment cups to Kirstenberg cases. Two variants, one with 1mm walls and second with 2mm walls.
This has two parts: The holder, and the back hook. I split it up as it would take longer to print due to the supports for the hook being so high up on the print.
Frustrated with the low cranking amps of the stock battery in my 2018 Mustang GT350R I ordered an Antigravity ATX20-HD lithium phosphate battery with a much higher CCA rating and significantly reduced mass. Because the ATX20-HD is much…
Purpose: For securely mounting the Valentine V1 Gen 2 radar detector onto the windhsield of S550 Mustangs, without the unreliability of suction cups. I am personally not a fan of suction cups, so I created this. Uses the standard mounting…
Replaces default battery plate to mount downward facing raspberry pi camera module.
This guide rail base is designed for the Milwaukee M18 CCS55‑0 circular saw, enabling the saw to operate similarly to a plunge saw when paired with a Scheppach guide rail. The Scheppach rail is a cost‑effective alternative to other rail…
Wanted a place to hide my extra efan and other accessory switches. This piece fits into the sunglass tray in the dash of a s550 Mustang. Drops in sits in place no modification needed other than dropping your own holes in during slicing.…
Requires 4 M2.5 x 6/8 Screws to attach. I recommend printing in PETG or similar to avoid the plate bending over time due to weight.
130mm 100mm 75mm 60mm Stencil for painting/Airbrushing decal Suzuki GS550E (just the GS550E) part ! See photos
