Liczymy pasujące modele…
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough. To avoid spending too much money on a new mSATA SSD, I designed a 2,5" drive holder to be able to reuse an old SSD that I already had. How to install…
I designed this front plate to house my Synology DS 920+ at the bottom of my RackMate T1. Included Keystone and non-Keystone versions. After a few failed prototypes (RIP my filament), I finally got the measurements right. The DS920 is…
Very snug fit HDD bracket for Fujitsu Futro S920. Fixed with 2xM3 screws to the Futro. Vertical printed without any supports (as in the 3mf file) 2,5" HDD with 9,5mm height fits inside. HDD can be fixed with 2xM3 screws too.
This is still a WIP, CAD will be released when it's more complete. Bom is also a WIP, you'll basically need everything from the original, and a 34mmOD, 31mm ID, 1.5mm H gasket use 1mm foam tape to seal around the fan exhaust and the…
Damper feet for Synology DS920+ . Print in TPU 98A with 5 perimeters note : after day of use, the best mod is velcro (the soft side, not the hoock side) under the disks
Redrew the original from @UnluckyForSo_3537297 and modified it to better fit custom racks and Synology on a rack shelf. Redrew the original and modified it to better fit custom racks and Synology on a rack shelf. Having the NAS on a shelf…
Feet for Fujitsu Futro S920 mini computer to make it more stable when stood upright. The feet have small notches to prevent them from sliding front and back when moving the computer, but it's not a tight fit, so when lifted, they'll fall…
The duct sits directly on the heat sink of the CPU of a Futro S920. For power I used the fan connector on the board. (And a left-over silent-adapter from a Noctua fan, to silent it a little.
I made those skid because I couldn't find 3D print model on the web. They are also way cheaper than the OEM from Honda. There is no ''Honda'' written on the skid (as on the picture). Printed in PETG, 20 walls loop, 75% triangle infill.…
This is a mount for the HW-398 Power Delivery Decoy/Trigger Board for the Fujitsu Futro S720/S920. I got my hands on some of the Futro S720s without PSUs, so I was looking for an alternative way to get them powered. Found the Decoy Boards…
Inspired by: https://www.printables.com/model/969418-synology-ds-1522-anti-vibration-stand
I built a home server from 4 Fujitsu Futro s920 thin client terminals and needed a case. That's why I created this case. the cover consists of 2 parts. the second part is optional to place a Cisco Business CBS110-8T-D switch. Additional…
Remixed from https://www.printables.com/model/250963-fujitsu-futro-s720-s920-hdd-sdd-25-mount Made the plate thinner allowing for more space in the PCIe slot next to the hdd (e.g. for internal power supply). This requires screws with head…
This model is inspired by Synology DS 1522+ Anti Vibration Stand by reserve and Synology DS923 antivibration stand by Adam Nuclear , but made from scratch in OpenSCAD using BOSL2 library to fit DS920+ specifically. Using this stand has…
WARNING: This model is intended to be printed with modifier meshes to allow for airflow. The original M.2 slot covers do not allow the use of M.2 heatsinks, as they collide with the clips. This redesign used a slightly different machanism…
Cooling shroud for hot HBA card with 4010 radial fan.
Just print it on it's side with some supports and it will come out just fine
This is a custom-designed riser support and cable guide for the Fujitsu Futro S920 thin client, created to solve a common mechanical issue when using generic PCIe x4 angled risers. The Problem When I tried to use a generic angled PCIe x4…
When fitting the S920 with a HDD (e.g. using this adapter ) , the speaker needs some relocation. https://github.com/asdil12/3dp-models/tree/master/s920_spkr
Base for fujitsu clients. Depth 46mm. External width 96mm Internal width (thin client slot) 52mm With groove for double-sided rubber tape.
Fixation pour SSD Samsung 980 Pro avec dissipateur dans un Nas Synology DS923+ C'est mon premier modèle fait avec Fusion 360, testé en PLA et ABS+ Une petite vis de pc sera nécessaire, c'est un peu galère a monter mais ça tient bien.
These are 3D-printed anti-slip retainer clips designed to prevent a Synology DS923+ from sliding inside a DeskPi Rackmate T1 mini rack. The clips act as mechanical stops at the front and rear of the NAS, keeping it securely positioned…
These replacement feet for the Breville/Sage Dual Boiler espresso machine (BES920) are in two versions: original, and with tabs (and raised slightly) for securing the espresso machine down on a benchtop/workbench in a mobile environment.…
This is a filter for the front of a Synology DS 920+ NAS and probably other 4 bay models from Synology. It keeps dust, spiders and insects out of your device. The opening is big enough to keep access to the disks and there is plenty of…
Integrating a heavy 4-bay Synology NAS into a compact 10-inch desktop enclosure while staying 100% compatible with standard print beds (250x210 mm) was a real challenge. Initially designed around the constraints of my Prusa Core One, this…
Base for fujitsu clients. Depth 46mm. External width 96mm Internal width (thin client slot) 52mm With groove for double-sided rubber tape.
The duct sits directly on the heat sink of the CPU of a Futro S920. For power I used the fan connector on the board. (And a left-over silent-adapter from a Noctua fan, to silent it a little.
Damper feet for Synology DS920+ . Print in TPU 98A with 5 perimeters note : after day of use, the best mod is velcro (the soft side, not the hoock side) under the disks
WS9290 Rear Panel Blower Mount A simple, rigid mount for securing the WS9290 blower flush against your printer's rear panel. Designed to keep your CPAP hose connection as short as possible by mounting at the top of the back panel.…
