Liczymy pasujące modele…
These are a few fundamental Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker) or heat erased pen (eg Pilot Frixion) to mark the lines onto your fabric or garment. I have also…
Update: new option for an infinitely adjustable moving jaw added! no need for the series of holes. The version included only works with a nominal 1x3" (actual dimensions 0.75inx2.5in- 19mmx60mm) Model files for this jaw are included in…
This is a 3d printable sash clamp. Long clamps are expensive, this is a low cost alternative, the length is limited only by the length of the wood board used as the bar. The width of the board to use is 3/4" or 19mm. This clamp uses 1/2"…
Skull Snake Frog Netsuke. Kimono Sash Counterweight. 1800's - Japan.
Window design for a dollhouse made for my daughter, sash can be lifted up and has a detent to hold it up when raised.
You can print sashes that provide 1 over 1 or 4 over 1 dollhouse windows. The flat springs on the sides of the sashes keep them in place after movement. I successfully printed everything without support. Install each sash by placing one…
English text below 2025-01-11: Druckhinweis Gute Erfolge erzielte ich bisher mit TPU Shore 85A; bei Verwendung von TPU Shore 95A empfehle ich, die Perimeterbreite auf 0,3 mm zu reduzieren, sonst werden die Stopper zu steif. 2023-08-16:…
Inspired by the Sashiko Templates of RagingRoosevelt. Same size/basic chamfer/fillet. Some are designed for a more fineliner style pen due to size constrained. Kawari komezashi (rice stitch variation) Kawari komezashi (rice stitch 2e…
A combined project of dolls house window and Fusion 360 parameters. Might have gone a bit over the top with parameters, but it came out great.
These are a few floral Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker), a heat erased pen (eg Pilot Frixion), or a wax marking pen (eg Clover Water Soluble Pencils) to mark…
Cheap window handles kept breaking. Designed some new ones that have not broken yet. Replacement window handle/pull/sash. holes are 3-5/16" or 83.1375mm apart. rev1=5.4mm hole dia, rev2 = ~5mm hole dia
Printing Several printing options are available: the blade may be printed upright (parts with “vertical” in the filename) or horizontally split in half ("Blade * half" in the filename), and the hilt can be printed “pre-assembled” or as…
Trancheuse / Guillotine à saucisson : Il vous faudra une lame de cutter seccable (18 mm de largeur), une petite rondelle (ø 15 mm maxi) et une petite vis pour plastique (ø 2 mm) pour tenir la lame de cutter. Guillotine / Sash sausages :…
Its a box to store the templates by RagingRoosevelt https://www.printables.com/model/1322339-sashiko-templates
Starting from the excellent design published here → https://www.prusaprinters.org/prints/63996-serre-joint-dormant , I designed my own with Fusion 360 adapted to wood size 30mm x 20mm and 8mm threaded shaft After 1st print and test I made…
Window mount and outdoor cover for WYZE cam V2. Category: Camera
Simple two piece device to fold fabric for quilt sashes. The “Sasher_Combo_Top” will handle two sizes of fabric, 2.5" or 2.75". When the top piece is snapped into the “Sasher_Bottom” it will form two slots to guide the folded fabric, and…
Introduction Sashiko (刺し子, lit. 'little stabs') is a type of traditional Japanese embroidery or stitching used for the decorative and/or functional reinforcement of cloth and clothing. (Wikipedia, 2025) About This is an original design…
This stencil is intended as a guide for stitching a sashiko pattern for embroidery. See the original Onshape model if you want to make adjustments to line width, thickness, etc. (I have other assorted fibre arts tools in my profile)
If you have old Andersen windows and the sash lift in the bottom pane broke, here's a model for your replacement. It has a good fit - not perfect, but I was happy. I tried to replicate the original as close as I could. Printed it with…
This case was designed to store the sashiko templates I designed but it should work for a lot of commercial designs as well. Use tree supports to support the closure catches. Use a hair tie over the catches to keep the templates inside!…
Discover the very customizable 3D-printed maraca featuring a removable handle for easy filling with different materials. This innovative design offers musicians and enthusiasts the flexibility to experiment with various sounds, enhancing…
This is a 3-Way lap joint made through sashimono technique. It is a two axis joint and small scale model is shown here but large model can be prepared for various uses and that too can be customised or modified as per requirement. Though…
Final Fantasy XII Fang belt buckles & sash stencil I made for a friend.
Hello World! I'd like to thank cheeky_b52 and tkeyser for the idea of this. I made this in (dried) TPU with FullSpectrum-Orca off a Snapmaker u1. This would work as a 2 color print as well. The .3MF file has the "objects" arranged in…
This is a pin like the one sold by National Supply, but more subdued and in line to the Sea Scout uniform. I made it with no backing recess, so you can add magnets or pin backs as you choose. There are 2 pins, wide (130 mm) and Narrow…
A piece of filament is pressed into the teeth by a ballpoint pen spring. It hold the lever in place and makes a satisfying clicking noise when turned.
The original model was great, but it was too big for my printer. It's not exactly difficult to split into two separate pieces, but since I already did the work, I figured I'd upload the split .stl files for the lazy. :) Thanks to…
This is the door trim piece that fits towards the front of the door. Two models are included: Scanned OEM trim piece - this is a direct scan with a little cleanup, the metal retaining clips are there, so you may have to sand them down to…
Sasha was a well-preserved calf of a Woolly Rhino found in Siberia.
This is a replacement for the plastic restrictors on sash windows. They allow you to leave your windows partially open, but children can't open them wider to get out (nor burglars to get in). First, print the Sliders in PETG, 0.2mm layer…
A template to allow you to draw lines spaced at 0.275" with a pencil, fabric pen, or narrow tailor's marking tool. Overall dimensions: 4 x 5 inches Openings for lines are 4 1/2" long by 0.1" wide
125mm x125mm stencil for sashiko, with sakura blossoms and a crane. Shrinking not recommended.
Bake cookies and feel Aizu(Japan). The types are "Akabeko", "Okiagari Koboshi", "Tojin Kite", and "Horse Sashimi". There is a legend in Akabeko to get rid of the plague. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No…
A replacement plastic lock piece for the Truth 16 series window lock. Install instructions: Drill out the metal rivets holding the metal back piece and remove. Flex the thin metal rod to release the winding arm. Install new part and…
Replaces the brittle plastic sash lock latch. Remove the old one and try to catch the four little springs and the colar, you won't need them. SNIP the three bumps on the retainer plate as circled in red.
Sashi Esport Logo It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can also be printed seperately and glued together. Print the parts upside down for a…
This goes in the top channel in your sliding window to prevent the window from being lifted up and out. This is specifically made for Champion Windows but may fit others.
A window latch that often breaks and isn't sold as a separate part. Commonly used in North America. Easily and safely replaceable without disassembling the mechanism. Print with full fill only. I've tried both PET and PLA. I recommend…
This model allows some wings to be attached to some fans so they fit perfectly in the upper (or lower) opening of a sash window. I mainly use this to keep the kitchen steam free whilst cooking, but it's also great for keeping a room…
Hang your graduation sash like artwork without the hardware showing. The mount screws to the wall; a slim crossbar slots on top, then the sash folds back over it, hiding everything but the fabric. It should fits most standard sashes. Let…
We have fume cupboards in the science labs but the sliding sash door latch was broken. I took a working one, drew it up on in CAD like for like and made a replacement outer shell. This excludes the steel bolt & spring. So if you have…
Miyamoto Musashi illustration from Vagabond and another with one of his sayings.
This is a Sash Hanger for the Scouting America/BSA Merit Badge Sash and the Order of the Arrow Sash . Standard size hanger hook. Fits on the standard size doorknob. Simple Print and Design. Print Stats: Elegoo Neptune 3 Pro 0.20 mm Layer…
Miyamoto Musashi Samurai warrior figurine 3d print stl, a historical Japanese soldier model for display and collecting, also searchable as Musashi samurai, samurai statue, and Japanese ronin warrior miniature. Print it for tabletop…
HANZO HASASHI PICTURE FOR FANS OF MORTAL KOMBAT
Box to fit 125mm x 125mm stencils. 2 lid options
Last week s sudden heat wave, affected my plants growing in the attic, badly . Since curtain rods and blinds is impossible to be mounted on this window, I had to come up with a quick solution to protect them from the hot sun. Those quick…
Made a new Window Latch (I don't know what it's called in english, Koppelhake / Kopplingshake in swedish) My first "own" model that's not a tutorial! :D Filament: Petg Walls: 4 Infill: 15%
Kusunoki Masashige Samurai Classic is a historical Japanese warrior figurine stl for 3d printing, ideal for collectors searching for samurai soldier miniatures and japanese history display models. Use it for tabletop wargaming, dioramas,…
I suggest only using these temporarily, while you are able to get a new window sash ordered. Start by measuring your original window sash against the drawing given. If it doesn't match, this won't fit. FreeCAD files are included so you…
Neat, consistent Sashiko stitches for visible mending, boro and Japanese embroidery. Slip it on a finger and it shows you every stitch. Made after a request on my Hand Sewing Finger Guide . That one spaces stitch and gap evenly. Sashiko…
A window/glass company asked me to recreate a part that was no longer being produced. This is an exact recreation of the original. It prints well in ABS and PLA. I used small supports for the recess on the underside. Holes are countersunk…
Hello Sashimi Lovers! Feast your eyes on these sashimi coasters! I made this in (dried) TPU with FullSpectrum-Orca off a Snapmaker u1. This would work as a 2 color print as well. The .3MF file has the "objects" arranged in order. The…
We found a used Pol-Lab Q-Flow fume hood for under $100, but it required some replacement parts, including the grey piece that rides the vertical sash window's track/slide rail thingy which, according to some light research, is called a…
1.- Introduction: In the garden we have two entrance doors, mounted on a metal fence that slightly move during the year, therefore I need to have a spacer for the door latch that will allow the door to keep closed with enough tolerance…
This is a sparepart for an old German Kastenfenster simlar to US storm window with inner sash or Double-casement window. This rubber (including metal spacer) prevent the handle to touch the outer glass. The general construction of…
This stencil is intended as a guide for stitching a sashiko pattern for embroidery. See the original Onshape model if you want to make adjustments to line width, thickness, etc. (I have other assorted fibre arts tools in my profile)
Inspired by the Sashiko Templates of RagingRoosevelt. Same size/basic chamfer/fillet. Some are designed for a more fineliner style pen due to size constrained. Kawari komezashi (rice stitch variation) Kawari komezashi (rice stitch 2e…
Hello World! I'd like to thank cheeky_b52 and tkeyser for the idea of this. I made this in (dried) TPU with FullSpectrum-Orca off a Snapmaker u1. This would work as a 2 color print as well. The .3MF file has the "objects" arranged in…
The original model was great, but it was too big for my printer. It's not exactly difficult to split into two separate pieces, but since I already did the work, I figured I'd upload the split .stl files for the lazy. :) Thanks to…
This is a Right Angled joint made through sashimono technique. It is a two axis joint and small scale model is shown here but large model can be prepared for various uses and that too can be customised or modified as per requirement.…
Settings: PLA or PETG; 4 Wall Loops; 100% infill; .04 nozzle w/ .32 layers These fit my Pella windows with single Sash locks. There wasn't enough of a gap for them to fit on the Pella windows with dual Sash locks. So, you mileage may…
Replacement window sash guide for Rollyson windows. Part Number Rollyson 60-674BA. Tested with both PLA and PETG. Supports needed.
3D printable topographic miniature of Kawasaki, Musashi-Kosugi - 🇯🇵 Japan Capture the beauty of Kawasaki, Musashi-Kosugi 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
sush fastener für Caravan fridges, drawer, wardrobes Ein doppelter Vorreiber für Wohnwagenkühlschränke, -Schubladen, -Schränke Category: Automotive
Shinmen Miyamoto Musashi – Buste 🇫🇷 Français Ce buste représente Shinmen Miyamoto Musashi , l'un des plus célèbres samouraïs de l'histoire du Japon. Réalisé dans un style sculptural classique, il met en valeur son regard déterminé, sa…
The Red Sashes Tavern from the boardgame Lords of Waterdeep. Fits 4 Building Control Markers in the back. More taverns coming soon!
Apparently those little handles on windows to lift them are called "sash lifts." I have a few windows without them, so I designed one in OpenSCAD. You should make sure to print them in the default orientation of the .stl for strength on…
Aug.15.2023 S-Body-u1.stl has been modified. ---------------------------------------------------------------------- If you make a japanese boat with a 3D printer, you can make a Japanese Traditional Boat Sashimi! Its FUNAMORI! Sashimi!…
Trainer for the RMJ Musashi Knife (Split version for smaller printers)
Lawson Sash Guide 5/8" and Face Guide circa early 2000's and maybe late 90's Sash Guide I have been buying replacement sash Guides for years at over a buck each... now just print your own. Use at least PETG. PRINTING: Sash Guide is an…
Alternative to the replacement part for the original seal, which sits between the sash and frame. When the roof window is closed, it ensures airtightness and sound insulation. The seal also reduces the loss of room heat. This is an…
Vent position lock for sliding window sash, designed to be compatible with original manufacturer part using 1 inch No. 8 sheet metal screws distanced 50.75mm apart Changes and improvements from original part include countersunk features…
The stops have flexible clips to hold them in place. The arrow indicates where the edges are narrower and will fit in easiest - start insertion at that end (up). As these are meant to go into the outside slide on windows, you'll need to…
