Liczymy pasujące modele…
This is a customizable Schlage SC1 House key (5-pin) with label. Download the SCAD file and open it in OpenSCAD. On the right hand side click on parameters and enter in your key coding. I have also uploaded a full set of Depth Keys using…
Friend of mine asked me to make an overhead mount for their fan so here it is… Split the mount in two and used 3d printed threads to secure the two together to make installing easier. Tolerance for threads should be .3mm Also tried to…
A simple key cover for a SC1 key. The fit is tight and should stay put well. No supports needed, 0.2mm height, print in orientation shown in the pictures. I used a brim but might not be necessary. Enjoy :)
This will bracket will allow you to mount Diode Dynamics SSC1 LED Pod in place of OEM FJ cruiser mirror light -The Cover will fit both the Driver and Passenger side, but the bracket the side specific. *Note: This will require running new…
A simple 2 SC1 Key holder when using a Lishi Key Cutter to cut a key. A simple holder to ensure that 2 SC1 keys are aligned so that a blank can be cut to copy an existing key using a Lishi Key Cutter.
This is a functional and aesthetic case for the STM32F429-DISC1 board. Gives access to all of the necessary GPIO pins/inputs, screen, and peripherals. The case is a 2 piece design with a bottom and top shell. Assemble with 4-M3x12 socket…
Pequeña pieza dónde guardar los accesorios de la limpiadora de vapor Karcher SC1. Fácil impresión. No necesita soportes.
This is a handy organizer for the Kärcher SC1 steam cleaner attachments. It fits all the ones that come in the "permium version" and is suppesed to be pushed onto a 16mm thick shelv. Printed it upright @0.2mm with supports and 30% infill…
5-pin bump key for Schlage SC1 lock cylinders, for locksport. Based on OpenSCAD code from https://www.thingiverse.com/thing:8925
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
A low profile easily 3D printable case for Steve Cousins SC126 Z180 small computer board. I printed mine in transparent PLA, 30% fill. Bolts: Four M3x25 (or 30mm) Four M3x8mm. Four M3 wingnuts, Four M3 Nyloc nuts. Print the top and bottom…
This small piece allows hardware mounting of your ESC switch at a convenient point in the back of the chassis, where you can turn the car on/off without taking the body off. It uses the stock motor wire clamp screw location and fits right…
This is a mounting plate for the Z80/Z180-based RC2014-compatible 8-bit computer SC126 board by Stephen Cousins. https://smallcomputercentral.com/sc126-z180-motherboard-rc2014/ This plate provides a solid base and reinforced card slot…
This simple print can replace the factory sway bar links for the Team Associated Pro4 SC10 (and Rival MT10). I found the factory links tend to fall off pretty easily, especially on the rear. Unfortunately, you can't buy just the links…
This is 3D-printable parts of the enclosure of the SC1000 by Rasteri. The SC1000 is an open source digital scratch controller. 3D-files and renderings made by me. I recommend not to order these files from a service or go through too much…
This is replacement to aluminum bearing block. I used these on heated bed movement, with printed blocks you can reduce 160 grams of moving mass. Bolt grid matches on Reprap Trespa carriage plate sod here:…
I made these 53 mm external jaws to fit bowls I made with the Nova chuck with standard jaws on the SC1 so I could finish or post-work the bottoms of bowls more easily. The SC1 is so small (51 mm diameter) it is not in the way when…
This front bumper support for the Team Associated Pro4 SC10 is a rugged replacement for the stock piece that has broken several times on me. As usual, Team Associated doesn't offer this part alone, and only comes with the entire front…
After being unable to locate the battery strap for my Team Associated SC10 RC Truck, I took measurements of the chassis and designed this replacement. The truck has long since been discontinued and I'm unsure if this same part will fit…
Impressioning Key Line Guides SC1, Y1, C83. Help keep your filing straight when impressioning.
This is a working, 3D-print-assembled without supports, mechanical NOR gate created by our Aggregate.Org research group based in the University of Kentucky ECE Department . Our GateRodders concept is to make functionally complete…
I sometimes want to mount my bowl or vase on the lathe in reverse direction for sanding or light finishing touch-up but I want to keep the alignment of the chuck that is still mounted. I then drive the bowl with a soft prop chuck and…
Dji Neo Flashlightholder for Sofirn Mini SC13
This is a mounting plate for the Z80/Z180-based RC2014-compatible 8-bit computer SC113 modular backplane expansion board and the SC112 Powered modular backplane board by Stephen Cousins.…
A couple of simple diffusers to turn the Sofirn SC13 into a little lantern - one has a hole in so some light can still escape to “ceiling bounce” Designed to work with the pocket clip in place, but works without it. print upside down with…
Hello, I needed SC10UU with SC8UU holes dimensions, so I created one. You have 3 versions. My original and then lighter and smaller types. Also I created SC10UU with original dimensions. It is also available in 3 versions.
This is a mounting base to allow an MSC10 Garmin Satellite antenna to mount where a prior Garmin GPS24XD was located. The three holes are similarly spaced, but this allows adjustment if the hole orientation on the boat isn't appropriate…
A 3d scan of the tool itself so you can make parts yourself. Scanned with a Revopoint MetroX.
Carcasa para la placa B-G431B-ESC1. Dispone de una ventana inferior para soldar los cables para el encoder.
I wanted to wear the Sofirn SC13 as a head lamp, so I designed this holder in FreeCAD. You can use elastic straps up to 30mm Print with PETG to provide enough flexibility for the arms that hold the light. Any recommendations are welcome,…
A stock Team Associated Pro4 SC10 does not have a good way to secure ‘shorty’ 2S LiPo batteries, which are popular for racing and come in much higher C ratings than the standard basher style batteries. So I designed these adapters to use…
Minimalist bumper designed for the STM32F407G-DISC1 development board. Initial insertion of the board is tight; slide the micro USB side of the board in first before securing the board under the two 1.5mm retaining tabs. Printed on Bambu…
In our Aggregate.Org / University of Kentucky research exhibit at the IEEE/ACM Supercomputing 2013 conference, we had a number of 3D-printed things in the exhibit or used as giveaways. This is the page holder that we used to display…
You will need 3x M3x20mm screws. The TPU seal is optional. There is enough play to allow for storing the flashlight with the tailcap ¼ turn unscrewed. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours,…
This design protects the tail light LEDs on the Team Associated Pro4 SC10. The truck comes stock with the LED leads bent at 90 degrees and wires tied tightly to the bumper assembly, which makes them prone to damage. There is no slop in…
Bracket to allow a SSC2/SSC1 combo to be used on ditch light. The model is made for the 2021 F150 Diode Dynamics ditch light bracket a flat bottom (No lip) is included for other application. Would recommend printing out of PETG or…
At some point in time I had to mount my Record Power SC4 chuck on an easel to hold a bowl I was repairing. The easel offered a 22 mm pipe to fit on. My lathe adapter to M33 was in use elsewhere so instead of an adapter to M33 I made an…
This piece acts as a spacer to sit on top of a 2S LiPo battery to make it the same thickness as a 3S battery, such that you can use the same length straps with both battery sizes. The spacer has built-in ‘shoulders’ that are spaced apart…
Original design by Burak Ozcan.
Mount for the Sofirn SC18. You can screw it inplace or double sided tape should probably work also. It has a flat side against the wall
In our Aggregate.Org / University of Kentucky research exhibit at the IEEE/ACM Supercomputing 2013 conference, we had a number of 3D-printed things in the exhibit or used as giveaways. This is the little dovetail puzzle keychain that we…
Now that saddle packs are history. Time to go back to the original strap for standard size packs. But wait, what do you mean you lost the original parts? They are not manufactured anymore? Can't find them anywhere? Worry not. Here they…
Sofirn SC18 Gridfinity Box
This allows you to raise the outer camber link by 8mm on a Team Associated SC10 4x4 RC truck Instructions Print at high density, and install on the rear hubs. Category: R/C Vehicles
These simple pieces allow you to use carbon fiber battery hold-down ‘tabs’ in the Team Associated Pro4 SC10 for ‘shorty’ style batteries, like these tabs for the TLR 22x4 4WD buggy : The pieces have a single hole each for a countersunk…
A bike helmet mount adapter for the Sofirn SC18 rechargeable flashlight. Adjustable angle and mounting plate that can be attached to a helmet by zip tie or other means. Assembly - Zip tie or otherwise securely fasten the helmet mount onto…
Replacement Eccentricity Link for Ryobi 16" Scroll Saw SC163VS. This part is no longer available for purchase, so I made this up to do the job. Replaces Part Number: S16020021 I used a vise to press the bearings into the link. Print…
Printed on CoreOne diagonally. Support: yes Infill: 15% Wall : 3
Lamborghini SC18 Alston as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
This is a loading arm replacement part for the Sylvania SSC190 VCR. It should also match the Funai MK9 family of VCRs. This includes a pre-configured for PETG Bambu Labs file as well as the STL. Print at 45 degrees to prevent stripping…
A battery wall (without ESC tray version) to go along with your standard pack lipo battery. Original design by Burak Ozcan
Designed specifically for the Sofirn SC18 and SP33S flashlights , these accessories attach to soften and focus the beam, providing a more diffuse and evenly distributed light. The SC18 model underwent several iterations to ensure it is…
A nice simple 1x5 Gridfinity bin for a Noga SC1000 scraper, can accept 6x2 magnets on the bottom. Its a pretty simple print that should work on almost any printer. Thanks for looking and happy printing!
Insta360 Ace Pro with SC13 Flashlight mounted at the Side. M3 Screws needed.
In our Aggregate.Org / University of Kentucky research exhibit at the IEEE/ACM Supercomputing 2013 conference, we had a number of 3D-printed things in the exhibit or used as giveaways. This is the giveaway that we made to commemorate our…
This is a remix/custom of "Raspberry Pi Camera Case and Mount for Mini Kossel" for my personal need in first time with my Longruner Camera Module LSC15 & COM-FOUR vent . I only remix/custom two parts (IR/LED). For all instructions & other…
Keep your Sofirn SC13 lens safe from scratches, dust, and pocket wear! This is a lightweight, friction-fit protective lens cap designed specifically for the Sofirn SC13 flashlight. It snaps securely onto the bezel, making it perfect for…
This is the case for the SC131 – Z180 Pocket Computer on Small Computer Central -> https://smallcomputercentral.com/sc131-z180-pocket-computer/ Thank you Stephen C Cousins of the United Kingdom for creating this CP/M Mini Computer The BOM…
Leider verliere ich immer wieder die Aufsätze für die Schiebeschalter des t.bone SC140 Mikrofons ... Deshalb habe ich die Teile nachkonstruiert. Ich habe PLA und PETG verwendet. Hat beides super geklappt. Viel Spaß damit!
A nice simple 1x5 Gridfinity bin for a Noga SC1000 scraper, can accept 6x2 magnets on the bottom. Its a pretty simple print that should work on almost any printer. Thanks for looking and happy printing!
A bike helmet mount adapter for the Sofirn SC18 rechargeable flashlight. Adjustable angle and mounting plate that can be attached to a helmet by zip tie or other means. Assembly - Zip tie or otherwise securely fasten the helmet mount onto…
This is the case for the SC131 – Z180 Pocket Computer on Small Computer Central -> https://smallcomputercentral.com/sc131-z180-pocket-computer/ Thank you Stephen C Cousins of the United Kingdom for creating this CP/M Mini Computer The BOM…
I made these 53 mm external jaws to fit bowls I made with the Nova chuck with standard jaws on the SC1 so I could finish or post-work the bottoms of bowls more easily. The SC1 is so small (51 mm diameter) it is not in the way when…
This small piece allows hardware mounting of your ESC switch at a convenient point in the back of the chassis, where you can turn the car on/off without taking the body off. It uses the stock motor wire clamp screw location and fits right…
This piece acts as a spacer to sit on top of a 2S LiPo battery to make it the same thickness as a 3S battery, such that you can use the same length straps with both battery sizes. The spacer has built-in ‘shoulders’ that are spaced apart…
I remodeled my original one whose material fatigue-cracked after 5 years of usage. If you print it with FDM then I recommend the model to print in the position shown in the pics: the side-walls around the magnet are pretty thin, you need…
This was inspired by the keys in the Sparrows Reload kit. They came in bags with the correct key pins but I thought it would be handy to have a compact way to hold the key pins with the key in a way that also lets you see that you have…
The Team Associated Pro4 SC10 has a couple of issues around the front headlights, one being that the body pops up and on top of them during crashes, and the other being the excessive brightness of the LEDs when looking directly at them.…
![[3d scan] Festool OSC18](https://media.printables.com/media/prints/1124019/images/8483675_12da6fcd-0658-487d-8f74-65986ffd8d22_a9dd1994-5989-46b1-baec-00541803ec81/screenshot-2024-12-28-141524.png)
