Liczymy pasujące modele…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Summary This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE Additional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stl Assembly (See Pictures): Adhere Frame Base Pad TPU to Frame.…
Anti Bounce Weight Has serration for forward assist which extends a bit back to impact buffer, slowing down the bolt. A Rubber Pad can also be installed to further reduce rearward travel impact. A separate Locking Pad is fixed in place…
🇺🇸 Welcome to Chicago! This model was created by Dany Sánchez . The Willis Tower is a 108-story, 1,450-foot (442.1 m) skyscraper in Chicago, Illinois, United States. It was commissioned by Sears, Roebuck & Co. in 1969 for its new…
15 and 23cm metric ruler with "transparent" letters and digits.
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
I created the 3d printable Prusa Research logo to make my Prusa i3 MK3 IKEA Lack enclosure by user Cisardom. look better than it already does. We all know i did not design the logo but i could not find one to print so i made one myself. I…
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
SeaRescue Catamaran – 3D-Printed RC Boat (Mostly Functional, Occasionally Janky) What You’ll Need (V1 - Above-Water Propulsion): Motor: A2212 brushless motor (other sizes might fit too) Servo: 9-gram servo for steering Prop: 8045 or 8060…
Let's go on another search and rescue mission. To support this task, I present SAR that is optimally prepared for it. It swims very well and has a small dinghy for direct support which can be quickly lowered into the water. So that there…
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
3 side panels: 440mm x 460mm 2 door panels: 220mm x 460mm
A simple stamp with logo of Prusa research.
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
I created the 3d printable Prusa Research logo to make my Prusa i3 MK3 IKEA Lack enclosure by user Cisardom. look better than it already does. We all know i did not design the logo but i could not find one to print so i made one myself. I…
This gcode will help find the correct z offset for a 3D printer's nozzle. It is a back and forth square (hence “oxplow”) that begins at -0.1 mm below the current nozzle offset and raises it each row until it ends at +0.1 mm above the…
--UPDATE-- I realized in my initial upload I only included the latest version of the lid, which has dividers between the samples holders. I have now included the original flat lid that has no dividers in case this is useful for you. This…
Prusa Research logo in 3D. 5mm high.
Would you like to know, how to create your own puzzles? Read the article: https://blog.prusaprinters.org/print-your-own-3d-puzzles/
I did not like the base meeples and research tokens. Please feel free to use them. Each meeple, I like to call them meepologist, comes in two parts, hat and body. Makes printing easy. The research tokens I also print in two sections, a…
Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018. We used it to display printed models. 10x10x160mm Aluminium sticks are used for prisms. Prisms are secured by hot glue sticks (of course, what else...). All the…
Company welcoming wall mosaic. The original piece is placed on the wall in Prusa front desk / Prague. It is fully 3D printed from white and black PLA material. Postproduction was made by filling spray and iron look color spray. I scaled…
This model is compatible with the lego system.
Lost Ruins of Arnak is a fun game but I have no clue why half of the game materials are amazing (arrows, jewels, tablets) and the other half is trash. Thanks to Virral for his great replacements for the cheap resource card board tokens .…
The origin is from @Maxim7745_280394 This is a test print to help fine tune a printer nozzle's Z offset. It prints squares that range from -0.05 mm to +0.05 mm in height. See picture for the square layout. All gcode files are meant for…
includes .stl file and fusion 360 .f3d file Category: Parts
Designed this print to help me dial in each location in a 25 point manual mesh bed leveling grid (individual offsets can be edited). It is an improvement on my previous test pattern as it now searches for the correct Z height when…
This gcode will help find the correct z offset for a 3D printer's nozzle. It is a back and forth square (hence “oxplow”) that begins at -0.1 mm below the current nozzle offset and raises it each row until it ends at +0.1 mm above the…
I have a Craftsman garage door opener from about 2006. To change the battery you have to open the remote case, which is held by tiny flimsy plastic pins… which broke over time. That means both half won't stay together and the battery…
Immediately when I saw this maker coin for the Prusa Community's December print contest I knew I wanted to print this with my MMU2.0. Boba Maker was kind enough to share the files so I could do just that! This should be a very easy print…
This model is compatible with the lego system.
Made this replacement gear for my Sears 41A4315 but should fit a lot of older garage door models from the 90s or 2000s.
I printed in PLA at .2 layer height.
No level 3 dormitory is complete without a Black Mesa Beverage Podium and Containment Tool (B-PaCT)! Currently available in Lambda Orange and Hazard Course Green, coming soon in Calhoun Blue. Contact Black Mesa Manufacturing to get yours!…
Change gears for Sears / Craftsman / Dunlap / AA Model 109 Lathe. Through hole and slots are a little bit oversized to accommodate the tolerances on my printer. I still clean up the hole with a 1/2" drill, but the slots typically require…
Pro všechny milovníky KCD2 jsem vytvořil model králíka, kterého pravděpodobně znáte ze hry. Pokud byste chtěli model zmenšit, doporučuji tisknout jej s 0,2mm tryskou, ale nemusíte nutně.…
Added files for regular ontos as well. These are experimental as I have not tested these. _________________________________ I found the trigger pull for the normal Ontos to be too tough when using 1.6 springs. The plunger head, catch,…
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. While the current diagnostic…
I was looking for a good injection pen stand and was checking everywhere, what was available for printing, but felt like nothing was satisfying my interests. I wanted simple stand, that would hold majority of injection pens, will not flip…
Im thinking about designing my own Noozle Cooler for the Nextruder V6 Nozzle Adapter. This way i can use it in my MK3s
Buck Rogers in the 25th Century - The Searcher - 1979-1981 3D printable model.
I just added a scaled down version. If you test print it then send the file to PCB Way and have it printed in the right type of plastic it may work. I just wish I hadn't thrown away my parts gun… I designed this in Tinkercad it may need…
My window screen broke, and Sears is no longer around here, so I needed to remake the corner piece in Fusion 360.
The two parts for the 2.5uL ejector can be assembled in your slicer by importing one as a “part” of the other. The ejector model can likely be modified to fit the 10uL Research Plus pipettes by removing some of the “middle” section of the…
Cover per bobine in cartone per filamenti KIT RESEARCH. Supporto stampabile per bobine in cartone.
Prusa Research Callibration Cube
This is a fully detailed model of the German polar research station Neumayer III , operated by the Alfred-Wegener-Institute in Antarctica ( https://www.awi.de/en/expedition/stations/neumayer-station-iii.html ). Built entirely on ice, it…
Simple insert to organize the box for The Search for Lost Species. The timing tokens can be left in the boat and covered with the BoatCover, which friction fits quite well. Print one of everything except for 4 of the player boxes. I laser…
gear broke on the antique rock tumbler so I modelled another one. You may need to drill the center hole slightly larger for your machine Print instructions Unassociated tags: gem tumbler, rock tumbler Category: Replacement Parts Summary…
None of the insert plates I could buy for my old Sears/Craftsman 12" bandsaw fit very well so with my new printer I decided to give it a try. This fits snugly and is tight around the key tab vs loose like the acrylic ones I had been…
Tray to quickly search through assortment box contents and pour back. The opening is designed for 49x49x70 box with 45x45 opening (Festool FES-498038). Desgined to fit on 180x180 print bed like my Prusa Mini+ Onshape document:…
3D printed coil and case for the (slightly modified) Clone_Pi_W metal detector. Design from : http://meandr.org/archives/3900 , originally from Andrey F. (fandy.front.ru). Added a potenciometer for volume control, and the 12V battery is…
These are storage trays for Award tokens, Citation tokens, and Research tokens found in the board game Weather Machine. While the box comes with a nice storage insert, the loose tokens themselves can be hard to get out of the insert.…
This wall plate allows you to neatly place two Chamberlain (Or LiftMaster, or Sears since they are all made by the Chamberlain group) wall control panels side by side. It has channels on the back side to hide the wires. You can use a…
ATTENTION: BATHROOM CAMERA IS FOR RESEARCH PURPOSES ONLY, novelty sign Category: Signs & Logos
Sonoma Raceway, Sears Point, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
A remix of the Prusa Whistle… Added a loop to attach a ring so that it can be added to a lanyard. Also modified to have an open side with a lid that can be glued on. This allows for a “pea” to be added to change the tone and resonance. In…
The Searz Tower is a massive, easy-to-print, low-filament-use skyscraper. The tower design was inspired by the Willis Tower (formerly, and more commonly, referred to as the Sears Tower) in Chicago, IL. At a 1:375 scale, the full tower is…
Organizer for Sears / Craftsman / Dunlap / AA Model 109 Lathe change gears. Two versions included: tall and short. Short one uses less filament, but the gears aren't as constrained. Category: Machine Tools
PRUSA Research Rocket Edit - 19.09.2022: IMPORTANT - After realising that there were some issues with the mechanism's functionality. I have uploaded files with a “Rev.” (with subsequent revision number) in the file name. If you have…
JN-66 : Jedi Temple Research Droid
I was looking for a new cover for my Samsung Galaxy A7 and obviously had to create one with the Prusa Research by Josef Prusa logo to fit with all my other stuff. Update 5/24: I replaced the design with a new and improved version. The…
A diving line spool for among other things SMB, search, navigation and soon. suitable for aporx. 30 meter (100 feet) of nylon line. Edit: Included the step file, by request, for easy modifications of the design. Print Settings Printer:…
200x200x400mm Trash can. Probably not the cheapest trash can but i wanted to try something with big volume and needed a new trash can. Printed with Verbatim Black and White PETG 0,30mm 3 Layer and Handle with 0,1mm 3 Layers. The handle is…
layer 0.2, first layer 0.2 at a height of 1 mm (layer 5) pause or change the material to another color. I used a combination of yellow in the background and blue for the information graphics/text It is of course possible to change the…
ATTENTION: BATHROOM CAMERA IS FOR RESEARCH PURPOSES ONLY, novelty sign Category: Signs & Logos
This is a realistic model of the German polar research station “Neumayer III”, operated by the Alfred-Wegener-Institute in Antarctica ( https://www.awi.de/en/expedition/stations/neumayer-station-iii.html ). It is mainly created based on…
Thought it would look good with the Prusa Research Logo embedded in the lid. First test print I had some z-axis issues and aborted, recalibrated and tried a small section of the logo/lid part as a test, and had some issues with adhesion…
Hello all, When I got my first MK3 printer with MMU2. The first think I printed was the Prusa Service Parts Box by Tomson ( https://www.printables.com/de/model/66338-prusa-service-parts-box ). So I was able to store all my service parts…
I created a 3d print Prusa Research by Josef Prusa logo for you, the color combination is up to you from 1 color to 3 color combination. MMU2S you don't need I am very much looking forward to your printed colour combinations. (•‿•)
Received a request for a Vintage 70's Sears Craftsman Toolbox Logo. I found originals with both white and silver for the background. This one was printed with Prusa Galaxy Silver for the background.
I couldnt find a dual color logo that printed on the same layer. This is my take on the logo and the best print settings I've found for the mmu3 on the mk4 Hilbert curve on the letters, arquimedes on the plaque. Change to your desire. 3mf…
taller crush sear that gets deeper into the plunger catching area, might fix your catching issue (it did with mine). tip: make it 10% taller in your slicer. that might also help.
Hello, this is BRRDS, (Best Rocketry Research Determination System), a high-power rocket developed at NCSSM over the past 3 years from 2019 and launched in late 2021. The purpose of the rocket was for research but really being able to go…
This is a replacement sear to reduce the trigger weight on the Colonel wasp 77. It needs 2 ZZ692 ball bearings, a M2x12 screw and a M2 nut. Greatly reduces the trigger weight, and makes the blaster a lot more nice to use.
Get the whole set! https://www.printables.com/social/336804-triple-g-workshop/collections/450223 Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When the…
This is a remix of Nevzat778's nifty player box for The Search for Planet X . I adapted the model to have a lid to help keep everything in place better, and I made the area for the pencil wider so it can accommodate a dry-erase marker. (I…
PLA 0.15 ~ 0.20mm 210°C 4 perimeters gyroid 15%
Hello everyone, Here is my design for a simple scent box for a dog. It is meant to fill with a desired smell and teach the dog to find it. Ideal to provide mental activity for your dog on rainy days ! Here are a few tips to learn your dog…
Endpiece from a Sears Craftsman Shop-vac hose used to connect accessories to. The original I had cracked. The outside diameter of the hose end is 2 1/4 inches. taken from https://www.thingiverse.com/thing:357574
A simple upgrade to Ekcnheb's sniper sear piece that holds the projectile a bit more, making it less prone to slipping. Print with the same XY compensations as the original model, the dimensions are identical, only the top is bigger.
Vikinger119's Talon Claw 4 slop remover remixed for the Caliburn 4. With some sanding and lube, as well as a little tensioning from the elastic, this part works great for removing the side to side jiggle from the Caliburn 4 Category: Hobby
Description This is a spool holder with buffer wheel. No filament load/unload error and easy to use. Version 5 - Update 2023 02 02 Fix and upgrade bearing stop, which will improve the stability. Version4 - Update 2022 09 13 Benefit: No…
SeaRay Coaster Set A set of coasters for SeaRay boat fans. Three colour coasters with a holder. PLA Pro .2 Layer height No supports Manual colour change on the inserts If you like, like Enjoy.
Several people in the comments of the original model requested an STL file instead of only the gcode. No changes were made to the original model design.
Search Token for Mansions of Madness 2nd Edition. Print Settings Printer: Prusa I3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Games
A design for a lake sediment trap. For more info: https://www.cartesiancreations.com.au/a-3d-printed-diy-lake-sediment-trap/
This organizer is meant to be used with the great tokens designed by PEZ_FPV over at Printables. https://www.printables.com/model/219421-the-search-for-planet-x-game-tokens/ It also holds your player token, 2 target tokens (download…
Lightly modified the Rush lower to take the Crush v1.9 (and later) Trigger, Sear, and Plunger Update 9/5/24: Modified the trigger area of the lower to increase contact with the trigger at rest
This is a pair of replacement pulleys for a series of old Sears Craftsman 4" Belt Sanders. They replace Sears Part # 814105 Lower Timing Pulley & Sears Part # 814106 Upper Timing Pulley. These are made available for non-commercial use.…
Search and rescue basket in 1:48 scale for the fellow modelers Print Settings Printer Brand: Anycubic Printer: Photon Mono Rafts: No Supports: Yes Category: Model Furniture
Dog Sniff and Search Tool, abbreviated DSST If you have a dog that loves to sniff out and search for anything like mine does, I'd like to introduce you to the DSST. This tool allows you to fill and hide a spice of your choice (I use…
Just a little adapter to allow a Televue Sol-Searcher to sit in the finder dovetail on a Sky-Watcher telescope. Mine is an Esprit 100 but this will likely work in other models. All pretty obvious except that the F360 source references a…
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. Design Concept The…
Search and rescue basket in 1:48 scale for the fellow modelers
Sewing machine didn't come with the case or portable base so made one up to make sure the machine doesn't tilt over while working with it. Not sure what other machines this will fit, I know it won't work on the 1720 (new design for that…
Update 11/5/2022 Added "round three fingers", "round four fingers", and "round five fingers". These are not parametric, but they are now easier to grip and less slippery, so I consider these models to be the final form. 「round three…
I made a remix of the awesome Mandalorian and The Child Ear Saver by Dude! My design is slightly bigger and is best suitable for adults. Print instructions I printed mine in Plasticz PLA Flex Black and Prusament PETG Orange in 0.15mm…
Mount it on the wall with 2 screws. Fits those big coleman propane bottles
