Liczymy pasujące modele…
A Silly Shell to fire 2 of those old Nerf N Strike whistling or Velcro darts (as well as Elite) with seperat "barrels". The original design had the "barrels" intersect meaning there would be loss of performance. Added an .3mf file with…
The original STL files were unuseable, since they were for the complete box in 1 piece. So i decided to convert the 3fm files (which are correct) to STL files. Original design:…
A larger lazy susan top, designed to go with this actual lazy susan turntable: https://www.thingiverse.com/thing:6502369 The diameter is 340 mm and it is about the same in height. The parts will slot together and it can hold a notable…
Got 3 versions here, 1 is the original Gunpla Mark's lid but uses seperate latches that use 4mm rod as a hinge pin. 2 is Gamgroll's version that uses the original gasket, also with 4mm hinge pins. 3 is also Gamgrolls version but uses…
a full size-low polygonal 12 Gause Shot (Shotgun ammo) assembled of seperate printed parts(4 pcs) supports requried glue requried (for assembly) ATTENTION: Some slicers like cura auto-scale small parts which are included in this model, in…
During print of the orginal model the box machanics often did not come out as expected or brakes during assembly.
This is a remix of the Chengdu J-20 from JackTheTinkerer (go check out their profile), so thanks :). I made the cockpit, engine nozzles and nosecone a seperate part that can be assembled using CA glue so you can print it in a different…
I really liked the design of the models these are based on, but I when testing them I felt like the bump the hook created interfered with the action of taking out the scissors. These models have a flush fit on the inside of the scissors…
Skoda Octavia with seperated wheels in TT, railway moddeling scale (1 : 120).
So, here’s the story: I found the aforementioned design and decided to print it. Unfortunately, it didn’t go well, as the parts had no tolerance between them, and the main body and lid ended up fused together. To fix this, I converted the…
Follow us on Instagram: https://www.instagram.com/sektor7_studios_3d/ Hello everyone :) We have modeled very beautiful and timeless TEA LIGHT . The special thing about it is that you can remove the heart inside. If the heart is not placed…
Correctly sized box to fit iem wrap, seperated into indivitual .stl files
I seperated the center and rings of the cable clip to get higher place efficiency on the printbed
this is a starwars phase two clone trooper helmet with a seperate range finder
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ Hello everyone :) Today we want to introduce you to our second model for the upcoming Mother's Day. A very beautiful…
The original STL files were unuseable, since they were for the complete box in 1 piece. So i decided to convert the 3fm files (which are correct) to STL files. Original design:…
This is just Piatek's model separated into 4 pieces so I could print it on my printer. There are no appreciable changes or enhancements beyond that change.
I seperated the STL file, because one of file was not laid flat and it failed while printing, should have looked
The original 3d model of this file by Binkley-Spacetrucker on Sketchfab is basically unprintable, very non-manifold. Peter Farell made it manifold and solid, but at the cost of some model accuracy. This version features separately parts,…
Only modified stl are uploaded. You need to download the original model: These are based on the V2 models. Wings and tail models should be printed with a brim. The Circles, eyes and buttons needs to be printed with support turned on. The…
Found these files on makerworld and love how they look. All the Kanto Badges i've seen on Printables are too flat for my taste. These have an excellent design and you can even glue on magents to keep them in the display case or as a…
A larger lazy susan top, designed to go with this actual lazy susan turntable: https://www.thingiverse.com/thing:6502369 The diameter is 340 mm and it is about the same in height. The parts will slot together and it can hold a notable…
Got 3 versions here, 1 is the original Gunpla Mark's lid but uses seperate latches that use 4mm rod as a hinge pin. 2 is Gamgroll's version that uses the original gasket, also with 4mm hinge pins. 3 is also Gamgrolls version but uses…
Separated parts to print in different colors. (I'm horrible at coloring/painting solid pieces) Should only need to print 2 files: "main-plug" + "center-pipe-start-end" Smaller layer height & slower speed & higher fill for pipes/center…
https://paypal.me/radicalreel Added wall storage jigs --------------------------------------- This is a remix of my ratchet strap reel which lets you take of the crank. If you print more of these it can be usefull. Some users requested it…
a full size-low polygonal 12 Gause Shot (Shotgun ammo) assembled of seperate printed parts(4 pcs) supports requried glue requried (for assembly) ATTENTION: Some slicers like cura auto-scale small parts which are included in this model, in…
I made the glass in single pieces and laid them flat for easier printing
Remixed to add a tooth for character and removed the stem to make it easy to print in a separate color. Print Settings Printer: Monoprice Mini Select Rafts: No Supports: Yes Resolution: .175 mm Infill: 15% Notes: Supports likely are not…
NOTE: This is a reuplaod from an old Thingiverse model of mine. Since then I designed my own, in my opinion improved and superior drag chain. I recommend you check it out before printing this.…
Made with seperate eyes going trough to print with another color Category: 2D Art
This is a remix of the crow's nest for the D&D Galleon by micahol. The print would fail over and over when I tried to print the original version. So, I separated the sail from the crows nest and mast. Both were printed with tree support,…
Hey Kent you inspired me to give it a go, Not sure if it will flip up or not properly due to the spikes, But I gave it my best shot. I was thinking a couple of dowls might work with the rotation, But I guess it will have to be printed to…
As a special request to Steven Borrero, I have tried to split this helmet into components as best I could. Hopefully it will work for you and your sons project, Please check the sizing and post some pics if you do take this print on,…
EDIT: I do not intend to use this design for my Ender-3 enclosure, but I'm keeping the parts up for those that need separated parts for whatever reason. I am trying to print these parts, as I would like to print my own enclosure for my…
I loved the tophat design by 93djen but the inner hinges kept breaking and they were attached to the spacer which is quite a big print in one piece. To overcome this, I made them separate pieces which can be printed laid flat so the…
9-4-22 Added the seperate files for each individual piece. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 38 Filament: PolyMaker PETG Category: Props
I took the ChaosCoreTech Model and split the handle up into the seperate pieces, but I kept the proportions the same. this take the 3 piece handle and converts it into 14 seperate pieces, -3 Top core sections -1 Bottom Core Section -9…
By Jace1969 on Thingiverse . Seperated into their own files for ease of slicing/cutting further.
A stand for the Ender 3 LCD. Rather than mounting to the front-right of the printer itself, this stand lets you have the LCD separate. Useful if you printer is in an enclosure, or you just wish to reposition it! NOTE: This is quite an old…
Remix of Volkswagen Golf GTI - Low Poly Miniature which was designed by von Agustin "Flowalistik" Arroyo Seperated the wheels that you can print them seperately, maybe with color change, or add your own custom rims. If your printer can…
This is a base male funko pop model which is mainly a remix of https://www.printables.com/model/97982-male-customisable-funko-pop-template with the hands from https://www.printables.com/model/261543-male-funko-template I did not want to…
Just a quick remix to have the option of using two colours for the TV front, perhaps it'll look cleaner than painting? Also allows you to print with the screen face down to the print bed if you prefer that finish. Parts should press fit…
Another Remix of the legendary kirby fume extractor. You can use it as a cooler or fume extractor. You only have to add an activated carbon filter sponge and reconnect the motor inverted. So kirby will help you in every living situation…
Loved the original but I don't have a MMU to make them different colors on the same plate, so I just separated the parts using SketchUp. Have a couple of parts together too (Mixers A+B and Tool Adapters) if one is keeping those the same.…
Separated the files for more convenient printing (original link not providable). Also added a version with the text cut out of the lid instead of being embossed. June 2022: added blank lid
Separated the open from the closed ceiling hooks. All credit goes to mverive .
The parts of toys needed to be printed separately as was facing adhesive issue. Print both model in a single print or separately. Pause the print at around 40-45%, place the inner ball inside the outer toy part and resume.
Not just for the Recreator 3D, but it'll work with it. I used a Voxelab Aquila X2 as a parts donor so it'll work with this printer. Otherwise check the model or print, it's a tiny print. Happy printing.
Hola Amigos! i just got fresh into the 3d printer space with my ender 3 s1. After searching for a can organizer that does not connect the upper and lower lane to store two different types of cans I found myself the first time in fusion…
A funny toilet paper holder for in your bathroom. Respect real creator.
Assembly Video coming soon…. Best for printing each part at 55-75 % scale. I have not tested each part on the bed, Im currently printing each part, some parts to make functioning it will take a few drill hole. for example… the…
This basically airs out your toothbrushes while keeping them seperated.
Hey Kent you inspired me to give it a go, Not sure if it will flip up or not properly due to the spikes, But I gave it my best shot. I was thinking a couple of dowls might work with the rotation, But I guess it will have to be printed to…
Mini Onsen bath made for my booknook I have other onsen furniture if you check my profile to go with it. It has the rocky surface and a seperate file for the water which can be printed in blue or colored.
Crimpers are hard to mount to a pegboard. They're big, weirdly shaped and have no obvious mounting holes. Additionally, you often get interchangeable dies which are easy to misplace and don't have good ways to organize. There are two…
simple remix that has all the parts as separate models
I figured the original wouldn't fit my Bambu P1S, so I split it into parts, the fin and the helmet. The rest of the files can be found at the original model. Category: Costume
I provide you with two versions. One small (10cm x 10cm) and a big one (20cm x 20cm) 10x10 20x20 The Model is seperated into parts so you can easy choose another color and the parts are more easy to print. Update 21.11.2023 Emblem and…
I originally found this model for free somewhere else. I don't remember where exactly and I can't find it anymore. When searching through yeggi, i think it's from cults, so i chose that as source, but it has been removed from there, so I…
für die dieselheizung für zwei seperate tanks
Reduced the wall width in order to print faster. Combined with my fast print model from the battery holder.
Support pad could be bigger but good enough for a short life with the kids.
Sono Motors (tm) hat mit #mySion ein STL-Modell ihres Solarautos bereit gestellt. Da ich beim FDM-Druck einige Probleme mit dem Supportmaterial hatte (schwierig zu entfernen) und gerne bewegliche Räder hätte, habe ich mir das Remix-Modell…
I have my 3D printer right next to my desk, but because it sits lower I couldn't see the screen. I have remodeled another user's mount. I recommend securing it with 4x small screws that have sharp edges (Not the ones that come with the…
Update 4/10/2020 Uploaded new files, cleaned up the mesh and also fixed some minor tolerances to make things print easier. Original Remixed From: https://www.thingiverse.com/thing:2811303 Seperating the clips from the main body, so they…
Needed a way to flag bins in a repair shop. These can be printed quickly and easily and can have text added to them. (Also I made them look like a snake)
Since the original file was all together, i seperated them. enjoy ;) Category: 3D Printing
Derivative of my other lures.
Changed all to blank Versions and seperated all so can be printed seperate
Someone wanted to have the original model with seperated head and a head from the other remix so the heads can be magnetized and swappable. P.S. get the wings from the original this was remixed from! Category: Toy & Game Accessories
During print of the orginal model the box machanics often did not come out as expected or brakes during assembly.
