Liczymy pasujące modele…
Description Organize all of the parts and cables for your Meross MSG100 into a nice clean enclosure which can be mounted onto the wall. This enclosure has room for the MSG100 and the wireless garage door opener accessory, as well as room…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu
A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link OC200 Omada Cloud Controller side-by-side with a TP-Link TL-SG1005P 5-port PoE switch. Parts Required This adapter is split into two pieces so that it fits…
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
A modular 19-inch rack mount for the TP-Link SG1005P. Also works with the TL-SG105. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…
Wall mount for a TP-LINK SG1008p network switch allowing it to be slid in and out from the top. Switch will need the sticky feet removed to face the other way from the picture. Needs supports. Print Settings Printer Brand: Creality…
A 6-inch Rack Mount for the TP-Link SG1005P | SG105 | OC200 series. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print…
This is a 3D printable wall-mount bracket designed specifically for the power supply of the TP-Link PoE Switch model TL-SG1005P. It offers a straightforward solution for mounting the power supply under tables, on walls, or any preferred…
Simple mount to for a Meross MSG100 smart garage door opener. I added a spot on each end so that I could zip tie the cables as a strain relief mechanism.
Just a small backplate to secure the switch in place. You can use double-sided tape, a single 3x16mm screw or even cable ties. I was originally going to mount on the underside of my desk but after printing figured I could just zip tie it…
This is a support for wall or desktop mount for the TP-link TL-SG1005D, works well and tested on a real router. Printed for test on Creality Sermon V1 PRO, low quality (0,28mm) with supports but might work without supports also (not tested)
considerations before printing Both switch and power supply slots are symmetrical on 2 axes: the devices can be inserted from either end, and facing towards or away from the wall/HSW lattice. In order to choose, consider where you want…
better solution for mounting a network hub SG1005 in vertical position
Wall mount for the Meross MSG100 smart garage door opener. Most 1 1/2 screws should work for mounting. You may need to use a brim to print this.
A 10-inch rack mount for the TP-Link TL-SG1008D V5 switch. Same version as reviewed here: https://www.servethehome.com/tplink-tl-sg1008d-review-unmanaged-8port-gigabit-switch/ This mount comes in two variants, one for the plain switch,…
10 inch TL-SG1005P rack mount
I recently ran into an issue installing my new WiFi Smart Garage Door Opener. There was no bracket to mount the sensor to the door and my door had a lip on it preventing me from lining it up easily. I made this bracket that the sensor…
Mounting bracket for Meross MSG100 / Refoss RSG100 / Refoss MSG100 smart garage door opener (non-affiliate links). The bracket is designed for Craftsman GDO, but should fit on any Chamberlain/LiftMaster or other GDO with mounting plate on…
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for TP-Link TL-SG1005P This bracket is designed specifically for the TP-Link TL-SG1005P switch, offering a clean and secure fit in your 10-inch rack…
10" Rack Mount for TP-Link TL-SG1005P PoE Switch This mount is designed specifically for the TP-Link TL-SG1005P and fits standard 10-inch racks (1U / 44.5mm height, 250mm width). 🛠 Print & Fit Details: Suitable for print beds 220mm x…
I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link TL-SG1008P from the ESRack Customizable Device Mount The ESRack system includes the following components: Mounting Brackets - used…
I created this rack mount for TL-SG1005P as a part of my Raspberry Pi Rack. This module fits DAP Audio 2HE rack cover . The insert is mounted with M3 sink head screws. The PSU is held in place by a special clamp (M3x5mm cylinder head…
I have an older tp-link POE switch that is slightly undersized for existing 10" mini-rack mounts I've seen. So I custom-designed a mount that has a slight transition/press fit so that the switch is securely held and does not move when…
A 7-inch Rack Mount for the TP-Link SG1005P | SG105(E) | OC200 series. This model is compatible with the GeekPi RackMate TT (Affiliated link). This model is part of a series of 7-inch rack mounts I've designed. You can check out the…
No supports required, print in PETG or ABS.
Needed for use: 1/16 rubber sheet or equivalent US penny or equivalent 6/63 grub screws, ¼ inch (ish) for outlet: https://www.amazon.com/gp/product/B0CCNDBD2G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Uses 3x 6/23 screws and nuts…
I recently purchased a tp-link gigabit PoE switch for use in my home network. The switch itself was designed for desktop use, so I decided I would design a bracket to adapt it for rack mounting. The bracket model is one piece, which…
Remixed 2W sled to accomodate TL-SG1005P PoE Switch Update 15 Sep 2023 Added Sled with slot for the provided PSU as well.
This is a replacement part for the Meross MSG100 Garage Door Opener. The MSG100 is an odd shape and does not provide any options for mounting, despite being a wired in device, other than double sided tape which might not be ideal. This…
A model designed to mount a desktop switch on the wall and tidy up cable clutter. The original desktop switch – Cisco – measured 140 x 140 x 34 mm. However, it can accommodate a switch measuring 140 x 140 x 37 mm. The model can be screwed…
Introduction Integrates a Sirocco/Jaycar 30mm 5vdc fan into the enclosure of the Meross MSG100. This mod aims to reduce “device not responding” errors which seemed to occur rather frequently during hot summer afternoons in Australia on my…
Sometimes, positioning the sensors for your Meross MSG100 is difficult. In my case, the magnet was too far from the reed switch. This led to the system thinking the door was always open. I didn't want to mess around with brackets, so I…
Positioning the door sensor on the Meross MSG100 can be a pain. In my case, without an extender of some kind, the included magnet was too far from the reed switch. I ended up creating a replacement magnet, but that required a lot of…
A 7-inch Rack Mount for the TP-Link SG1005P | SG105(E) | OC200 series. This model is compatible with the GeekPi RackMate TT (Affiliated link). This model is part of a series of 7-inch rack mounts I've designed. You can check out the…
I created this rack mount for TL-SG1005P as a part of my Raspberry Pi Rack. This module fits DAP Audio 2HE rack cover . The insert is mounted with M3 sink head screws. The PSU is held in place by a special clamp (M3x5mm cylinder head…
considerations before printing Both switch and power supply slots are symmetrical on 2 axes: the devices can be inserted from either end, and facing towards or away from the wall/HSW lattice. In order to choose, consider where you want…
