42 modeli
This is a mount for the E3D v6 hotend and the BLtouch sensor, designed to work on the Solidoodle 2. This was inspired by the mk5 mount by Lawsy and adapted for the BL touch auto-bed tramming sensor. I printed this with 20% infill, no…
i upgraded my solidoodle 3 to a duet 2 maestro and my x axis was really noisy so i wanted to try a different stepper motor to see if it was the stock nema14 making all the noise so i decided to make the x carriage to mount a nema17 on…
Replacement Z-Endstop for Solidoodle 2 or 3. Print Settings Printer Brand: Solidoodle Printer: Solidoodle 2 - Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Category: 3D Printer Parts
The solidoodle 4 has a different mounting setup to the solidoodle 2 and 3. This is based off zlagger design that can be found on http://www.solidoodles.com/models/view/470 I cut off a few extra bits to make space for the side fan and…
Bought this camera to do time-lapse and monitor my Solidoodle 3 while using OctoPrint/OctoPi: Creative Live! Cam Sync HD 720P Webcam…
The Left side Y Axis carriage for a Solidoodle Workbench Apprentice. Probably works for the regular Workbench as well. Reverse engineered from the stock design. Category: 3D Printer Parts
Mounts an 80mm fan to the Solidoodle in a simple way to cool the board. I spliced my 80mm fan to an old 12 volt adapter from a router for power. Magnets are 8mm dia x 3mm rare earth magnets purchased at Frys. 10 of em were like $6. *Don't…
Yet another part cooling improvement for the Solidoodle mk2, using Lawsy's NEW replacement carriages. This design will fit a 40x40mm radial fan, which has much better flow, when compared to those little 30x30 axial fans. Printed @ 0.15…
I created a new Z-axis end stop after damaging the stock one. This one is adjustable using a nut and screw.
Simple E3D Hotend drop in that requires no extra screws or parts! I'll add photos later and a step by step guide. (Temp. Guide - Feel Free to ask questions!) In order to use this adapter you need to take the old hotend and the block it is…
OpenSCAD designed mount for Lawsy's MK5 so that I could use the parts from http://www.thingiverse.com/thing:540716 to make an extruder fan. Update: Original version was backwards. New files labeled fixed have the correct orientation.…
I bought a mk8 hobbed gear and it offset the extruder to the hotend. So i reverse engineered lawys mk8 and made it suit the smaller hobbed gear. Added a filament path while i was there too that used a random bit of PTFE tube that was 6mm…
I had some problems with filament running into the fan when the extruder was backed up into the rear left corner. Created this simple thing to block it. Made it a clip on so I didn't have to mess wtih screws. Seems to work good. Category:…
Redesigned screw stop for Z axis. Extended for use with ceramic tile. I'm using it on a Solidoodle 2 with the newer aluminium bed. Instructions I printed it. Then used a few drill bits to get the holes just the right size. Category: 3D…
This is a new set of carriages for the Solidoodle 2. They were inspired by Lawsy's carriages and additional work by CHAMP and others. I made these because I needed a bit more space for tightening the fishing line I use instead of belts.…
I can't find the SCAD file but I used OpenSCAD to add a part cooling fan mount to this extruder that I use on my Solidoodle 2 https://www.thingiverse.com/thing:431363 . The fan is from here: https://www.thingiverse.com/thing:540716…
Created for TheHotEnd to address a different Solidoodle 4 part... https://www.tinkercad.com/things/1FPT9iGkHR0 Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kaEpJRZYU9V Make 4 of these to raise your Solidoodle up 5 ins So you can put power supplies or spare filament rolls or whatever under your machine. I…
Replacement spool holder for a Solidoodle 2 or 3. Print Settings Printer Brand: Solidoodle Printer: Solidoodle 2 - Pro Rafts: No Supports: No Resolution: 0.3mm Infill: 20% Category: 3D Printer Parts
* UPDATED * V1 was to flexible. V2 is a lot stiffer, has a lower profile, and will just work better. Just tie to one of the anchors and wrap as necessary. Was using spectra fishing line to replace toothed belts. Was kind of a pain trying…
Dial gauge mount for Solidoodle. Uses rare earth magnets 8mm diameter x 3mm. I purchased the magnets from Frys for $6 for 10. Works with Harbor Freight 1" Travel machinists dial indicator. Use with http://www.thingiverse.com/thing:167459…
Mount for Pittsburgh Harbor Freight 1" Travel Machinists Dial Indicator. Snaps on to the PEEK insulator and uses 2 socket head cap screws to line it up. Instructions Had to use support in order to build the part (picture included showing…
Made an underside fan duct that fits Lawsy's NEW replacement carriages - centre front v2. i have an e3d v6 on my solidoodle, i dont know if it fits with another hot end. It bothered me that the only fan duct out there was Lawsy's fan…
If you have an old PS3 eye camera floating around unused and unusable on a PS4, a Raspberry Pi and a solidoodle then this is the one for you. I needed a camera since moving the printer away and this works well thanks to the awesome work…
So i was using TickTock's cooling fan system ( http://www.thingiverse.com/thing:621383 ) But the duct at the end didn't sit where it needed to be so i designed this one to fit my setup THIS FITS MY SETUP IT MIGHT NOT FIT YOURS I'm also…
----EDIT: Since the me creator 2 is a solidoodle clone/upgrade, this might work on that as well. i have no way to confirm this though.---- Made a push fit spool holder for the solidoodle 2, this design uses 608 bearings. print both parts…
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/3cdQ294cnmj Modified version of stabilizer made by Adoniram Instructions I started with Adoniram's Y axis stabilizer I used his bearing holders then made up a…
Converted my ancient solidoodle 2 to use the Titan Aero extruder/hotend combo. Included are all the stl and openscad files for the parts I used. Information about how I did the modifications can be found at…
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/8bNnCZW2Cur This is just one of those almost useless things. Unless you have a no heat problem, then it will tell if power is getting to heaters or not. Or in…
Simple Spool Holder for the Solidoodle 2, designes with FreeCAD 013. Just print one of each and reuse existing parts; pictures are quite self explaining. Quickly printed, simple to clip, no screws, no hassle. Category: 3D Printer…
Customized version of http://www.thingiverse.com/thing:91477 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=91477 Instructions Using the following options: clip_edge_thickness = 1.5 back_lip_extra_length…
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/atx0LkaszjI With this you can see what your extruder is doing. I didn't realize how much it moves!! Instructions I printed it at 3mm then just popped it on.…
Mk2 of my solidoodle extruder mount for the e3d v6 hotend with a bowden extrtuder. The mechanical parts will have to be sanded (i got away with rubbing them together really fast) and hot glued on. as will the servo. I use this setup as of…
I rebuilt a nice Solidoodle 3 printer frame for use with PLA plastic. Sadly, my filament delivery system for the ABS-only Solidoodle 4s that I use didn't work so well with the PLA filament I'm using on the SD3. Thus, I had to design a…
Customized version of http://www.thingiverse.com/thing:91477 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=91477 Instructions Using the following options: clip_lip_curvature = 1.5 base_size = 64…
Customized version of http://www.thingiverse.com/thing:91477 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=91477 Instructions Using the following options: clip_lip_curvature = 1.5 base_size = 64…
Customized version of http://www.thingiverse.com/thing:91477 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=91477 Instructions Using the following options: arm_buttress_width = 9 clip_lip_curvature = 1.5…
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/8kTGMZVx9Y7 I added this fan to help keep the PCB from heating up . Instructions I cut the fan out of an old laptop .When I realized that it ran on 5 volts I…
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/gq6iJrwJmHN I used these to mount power supply to back of case Instructions Print 2 mounts one for the top one for the bottom. I drilled and tapped 4 holes…
This is probably wayyy overdue, but I made this a couple years ago, and it's served me well. Appropriate gaps are provided for the general oversizing of printed parts and some epoxy. Print Settings Printer Brand: Solidoodle Printer:…
This is a small mounting adapter I created to mount the Fan Shroud to the Extruder itself. Big shout out to Lawsy! Thanks for your designs! Lawsy's Solidoodle Jigsaw Replacement Extruder mk5 - http://www.thingiverse.com/thing:111213…
Customized version of http://www.thingiverse.com/thing:91477 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=91477 Instructions Using the following options: base_size = 64 arm_angle = 15…
