Liczymy pasujące modele…
Small stuck pieces of filament can easily be cleaned by this tool from smooth sheet steel. Special handy for the residue of PETG supports that hold very well. Print instructions Designed for this blades:…
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7539525684817906966 ℹ Description: This chibi-style warrior was custom-designed, inspired by the iconic Mini P.E.K.K.A.…
Spatule à plâtre ou tout autres matériaux similaire
This part replaces the top part of a mudguard holder on some models of Gazelle (children) bikes. I hope this helps for someone. This is only the upper part. The part most likely to break. Included is the Fusion360 archive to help you get…
Author: Prusa Research (Vlado Turek)
This bed scraper is perfect for removing small blobs, filament strings, and leftover adhesive. 🔧 Practical & Efficient Available in 3 different sizes to suit any printer setup Lightweight and easy to handle Helps keep the build surface…
I made this spatula to lift objects off my print bed without damaging the bed surface. It has round edges to not cut into the surface and is thin enough to do the job. See Print Settings for optimal results. Print Settings Printer Brand:…
30% infill 0.20 detail http://www.thingiverse.com/thing:3406899
Prints in a couple minutes and helps spread thermal paste on a CPU.
Do you need a tool to smooth silicone around pipes to seal any leaks? Or after installing a sanitary fixture? This is the tool you were looking for. This tool features a handle for a comfortable grip and various spatulas with the main…
A simple tool for easier gluing, especially with epoxy glue and for larger surfaces. Available in two versions in two lengths, 80 and 130 mm. Print instructions: Printing the model does not require any special settings. I usually print…
Spatulas Holders for the HSW Compact and nice-looking holder for small spatula that can be printed without support. Easy to Snap to your Honeycomb Storage Wall. Spatula Dimensions. Here are represented the dimensions of both spatulas that…
This is the final version of a bed scraper that evolved from a much simpler model I designed years ago. I created it by combining features from several other models I found online, but none of them included everything I needed. It has…
I have created these tools with different shapes to model your vases or your paintings with plaster. Group 1 - allows you to create geometric textures. Group 2 - allows you to create vases or cups with simple shapes. Group 3 - allows you…
I needed a spatula for my bed and I couldn't find one I did like. So I created one myself. This is the STL file so you can do with it whatever you like. I know it's fairly large but that's because it has not one straight edge. So it…
The Ender 3 V2 drawer is really nice, but the spatula doesn't fit in there. There are no designs for this problem, that is why I designed one my self! I also have a Gcode sliced for Petg. Print Settings Printer Brand: Creality Printer:…
[EN] You can find the description in English below [ES] Espátula con Mango Hexagonal Mejorada con Cuchilla Universal Este modelo es una modificación del diseño original de una espátula con mango hexagonal, que ya ofrecía una excelente…
Simple caulk spatula designed for edging. I've included versions in 6, 8, 10, and 12 mm sizes, both in the rounded and 45-degree designs. Created in Fusion 360. The round grip in the middle aids in holding it. I printed it with a 0.12 mm…
A simple holder for your 3D Printer Spatula.
I liked the Prusa scraper, just needed a larger hole for hanging it. :-)
Minimalistic heatbed scraper for smooth PEI or textured steel sheets. I recommend printing in PETG for better durability. Works with all print settings and filaments. My print settings: PETG PrusaOrange 0.15mm Quality 15% Infill 2…
Spatula for 3D Printing, DIY tool for your printer Category: Animals
to spread or mix glue paint grease adhesive epoxy silicone - use PETg for flexibility
This holder for spatulas belonging to TM6 and also TM5 will keep your kitchen clean. No more mess around with dripping and rolling spatulas. Printing Recommendations: 0.2 mm layer hight or less, no supports needed, 15 % infill, 2-3…
Needs only approx 2m of filament (6g). Suggest to print with 6 walls to avoid infill on the spatula. One STL file with tray and spatula, can be split into individual objects in slicer.
Bed Scraper / Spatula This is a modified version of the PRUSA one. Handle width is good, I just wanted it thicker. Handle is now 7.62mm thick. (0.300” inches) All edges finger safe, except front blade edge. PLA scraper version for TPU…
Epoxy mixing spatula & spreader Combined stirrer, applicator for the Epoxy Work Station I joined the tools to make one tool instead of two. I increased the thickness of the tool ends to make them less floppy and reduced the thickness of…
Putty knife for when you forget one at the hardware store and don't want to go back.
Sencilla espátula con diseño agradable a la mano y funcional, en mi caso use filamento ABS para resistir mejor la temperatura pero se puede usar otros filamentos tranquilamente.
If you make this model and like it, please post your make and rate the model, that would make my day! I made a very small change to an excellent model created by @ericsnis and removed most of the front wall so there's just a small lip…
useful small spatula to remove prints from the buildplate: https://www.thingiverse.com/thing:1899906 created by: https://www.thingiverse.com/ruscustus
The spatula has 2 usable edges that can be adjusted to your needs. Due to its parametric design it can be any size, from tiny for model kits to big for woodworking for example. --- Erratum (03/06/25): Addition of a make and a Bambu Lab…
I'm pleased to introduce an innovative spatula designed to facilitate and expedite the application of thermal paste. It's designed to be easy to print, very fast. I used PLA+, with a layer height of 0.2mm. Really cheap, used approximately…
Ergonomic Spatula for Thermal Paste / Epoxy / Glue - Spatola ergonomica per pasta termica / colla Easy to print, optimized filament usage Resize/Scale to adjust dimension All our designs are free to download and use—we believe sharing…
Cette spatule spécialement conçue est l'accessoire indispensable pour tout utilisateur d'imprimante 3D. Elle vous permet de retirer délicatement et efficacement les objets imprimés du plateau, minimisant ainsi les risques d'endommagement.…
Liked the size and shape of the original design. However the edge was too thin for mixing/spreading epoxy. The edge is now ~1mm thick. If you like to scale it to increase size, keep the overall height at 3mm to maintain the edge of the…
Introduction Introducing the Ergo Spatula that not only helps removing that purged and calibration filament effectively from the build plate, but also boasts a visually appealing design, belonging to the ergo line that offers a unique…
A practical spatula or spoon holder to keep your counters clean while cooking. This holder elevates the utensil to help cool it quickly while catching the drips in a small dished area. The holder was especially designed such that it…
There are many handy scraper holders here, but none quite suited my needs. So I made my own version. Designed in Onshape, printed on Bambulab P1S, tested on my own HSW (Honeycomb Storage Wall). Recommended settings Material: PETG for its…
An FDM printed spatula for use on FEP film on SLA printers. v1 Print instructions Intended to be printed in PETG at 0.1mm layer height on smooth PEI.
Pizza Spatula I have to admit, I really like to make my own neapolitian pizza at home for me and my friends. After 2 years I now want to push the process a little bit with some more usefull gadges like this spatula for example. The…
A collection of three spatulas in a range of sizes, based on designs from Japan. Widths: 20mm, 30mm, 40mm Can easily be resized in the slicer to suit your needs.
Take some fine sandpaper and sand it smooth, straight, and slightly sharp.
Update 1/27/25: This model is now OUTDATED! I redesigned it, and it's available here: https://www.printables.com/model/1169011-articulated-aerospatiale-sa-2-samson-redux I haven't watched any of the avatar movies, but I really like the…
Uses a coupler for the profile in the railings on the Ender 3 V2. I'd reccomend a layer height of 0.16mm tops.
SDN headset based on the game Dispatch be sure to tag me if you use this for your cosplay! https://linktr.ee/ODCAprops Assembly
Long spoon/spatula to get the most out of your cosmetics bottles (ie. moisturizer, thick creams, etc.) Printed in PETG, but PLA works just as fine. Regular PETG presets, 0.15mm layer height.
Simple spatula remix from Tor G - scaled to print on Mini
I was asked to round the corner of the already excellent spudger from AeroSteveO and figured there might be others who need the rounded corner.
Quick remix with a 45° angled end.
II like the Prusa Printables spatula, but I didn't like reprinting the whole thing when the edge gets dull. I can also print the blade with a more durable material. There are 2 notches in the bottom at the seam to use a small screwdriver…
Scraper for finishing caulk in various sizes. Would recommend starting with larger size to remove excess caulk then down until desired finish is achieved.
grattoirs différentes variantes soit pour hot bed ou pare brise
This set includes three resin or glue spatulas with different flexible tips for achieving precise and even application. The flat, semi-round, and rounded tips allow for versatility in spreading and smoothing the resin, making them ideal…
Well, the Scorpion needed a companion, so here's the Samson. I had already designed a Samson a while back, but it wasn't proportioned correctly, had some big issues, and most importantly, the rotors barely even worked. So now, I…
An easy and simple design I started by reproducing the original model on a paper and use it as Canvas in Fusion 360 Then design the spatula using Circles and Splines One Extrusion and a Chamfer after here is the spatula ready to be…
Count Spatula : Cars post build I added another .6 offsets to the model as a whole. You should be able to get away with resizing it to 60 percent.
A spatula to apply grout with different radius corners (right angle, 3mm, 6mm and 10mm radius). Print in PETG for some flex. Category: Hand Tools
Simple Epoxy/Glue spatula for application and stirring of Glue Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic PLA Category: DIY
I needed a notched spatula for distributing some glue across a large surface. Since I just came back from the hardware store and was in no mood for another trip, I quickly checked Prusaprinters.org for a potential replacement. There was…
Spatula to remove your printed Parts
Save yourself a trip to the hardware store with this spatula. Tip: The smaller the nozzle the sharper the edge
Due to the pandemic, students were unable to attend the "Introduction to Laboratory Practice" course at the University of Oldenburg. I have adapted the course content and the laboratory equipment to experimentation in a private…
A spatula to mix paint, use it for baking or any other use you can imagine. Please remember that the printed spatula may not be suited for certain applications depending on the used filament or printig technique. ***german version*** Ein…
Small spatula to take cosmetic substances from their container. Made per request from my beloved girlfriend.
A neat way for storing multiple spatulas/thin tools. Based on Zack Freedman's design of Gridfinity.
Mine is created from Nylon, but any other material should work too. Dimensions: 110x70mm Happy mowing!
This is a reaaallly simple spatula you can use for whatever you like. Easy and fast to print with any material you have at hand. Made this quickly for my wife in need of mixing some components for her crafting project… Feel free to resize…
Spatula 3in1 - Spatula, SuperPINDA adjust tool and Prusa Allen keys keeper. I used a credit card (0.80mm) as the right measure as we see the instructions at:…
Couple of small and simple spatulas for spreading glue, putty or some other material. I made these to even out surface scratches on a print before painting where a want a nice surface. And as later noticed, these work really well for…
My wife has a jigsaw puzzle obsession... She always found it difficult after creating assembled portions of the puzzle to move those pieces elsewhere. So I designed a simple and fairly flat spatula so she can pick up and move those pieces…
Throw away that metal scraper that came with your printer before you ruin your expensive build plate! This plastic bed scraper is designed to have a sharp, wedge-like edge that easily slides under prints, but is soft enough to never…
spatula holder and pot lid holder help keep the kitchen clean
This simple mixing cup, rod and spatula combo can be used to mix silicone rubber. The great feature is that the radius of the rod is matched to the bottom fillet of the cup, so you have thorough mixing and can sweep a lot more material…
A spoon spatula, double sided spatula and a double sided spoon ready to print. Models in .blend format included for customisation, so it fits your needs! Make sure that the plastic you want to use to print these tools is HEAT-RESISTANT…
A simple holder that allows to fix the spatula and the pliers that come with the ender 3 to your SKÅDIS board. Update: i uploaded a V2 with a longer pliers holder I printed it standing upright in 0.2 mm Layer height, two walls and 20…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- My George Foreman Grill didn't come with the spatula/scraper,…
Only 10g bed scraper sharp and strong. Print profiles PLA and PETG for MK4S and Prusament. Optionally print in 2 colors without MMU. Recommended 0,2 mmlayer, 3 walls, 15% infill.
Design based on commercial products. I originally designed the spatula to apply super glues and epoxies, but now I use it for so many other uses. Print a bunch to have on hand. If the fine side becomes damaged, just cut it off and sand…
It's a spatula whit removable heads
Good morning, Welcome to my profile, full of models and miniatures :-) I have spatulas, silicone scrapers for you. Ideal for creating a beautiful radius. You can choose from R2, R4, R6, R8, R10. It is ideal to soak the spatula in spring…
A very useful set for the daily care of a small animals cage. Shovel has been printed in PETG and is really sturdy and is a remix of an unknown design I can't find anymore. Has been resized, cropped and a bit edited. Spatula has been…
réalisation d'une spatule pour décoller les impression fait en PLA 15 % remplissage et finition en 0.2
Print in PETG or food safe PLA (to keep the 3D printing equivalent of spelling bees at bay). Change colour for a nice touch. Sand the blade with a sanding block to remove the layer step lines. Category: Kitchen & Dining
Ergonomic, robust, light & easy to print. No fancy patterns, just an useful thing that works. For obtaining a sharp edge, please print with 0,15 or lesser layer height.
spatula for special tasks you can use it for painting and sculpting
My wife recently got an upgraded spatula for rice. It has a metal core and silicone exterior. However it was a bit too wide to fit in the holder that came with the rice cooker. This model fixes that and also holds the spatula more…
As a bread baking enthusiast i was in need of a bread spatula to work my dough. Didn't found any model, so i made this one. It's great for working the dough in any surface, even inside a bowl (circular model). I use it quite hard and it's…
My first print two commponets Model 1.Flex yellow SUUNLU -SPATULA 2.PETG orange PRUSAMENT -GRIP please share with me your creations and result!!! Thanks
Stop ruining random pieces of cardboard when mixing 2-part epoxy! This ultra-lightweight (only ~6 grams) mixing tray prints in minutes and features a clever, integrated design perfect for quick repairs. Key Features: Snap-Off Spatula: The…
Hello! i have been searching for something like this and i haven't found it, so decided to create it. There are 3 sizes of the beaker. Sizes should be around 100, 150 and 200ml to the line, could be scaled to be larger though. Base wall…
I'd suggests using a thin piece of clear plastic for the glass instead of printing it. split in parts Category: Props
Hi there, Presenting my latest “masterpiece”: a spatula and glue spreader set! I've kept the model as tiny as possible to save your precious filament and minimize print time. After all, who wants to wait forever for a few handy tools,…
Mark where enemies fell with my Blood Spatter Tokens ! (new & improved available on Etsy ) These tokens add a surprising amount of character to any miniatures-based game. I suggest simply replacing an enemy figure with a blood spatter…
