Liczymy pasujące modele…
I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…
This is an Electronics front enclosure for Ender 3/Ender 3 Pro, it is designed to fit: Bigtreetech E3 Mini Rasperry Pi 2/3 4x LM2596 1x Noctua Fan 40x40 The design has been splitted in 4 parts, use selftapping screws 2.5 x 15 mm to join…
Case for Pi4 and Hyperpixel4
Update: 15.05.2020 uploaded the f3d Fusion file Designed this frame for my rpi-magicmirror-eink project. It uses a Raspberry Pi Zero and 7.5 eInk Display from Waveshare* , to create a small low energy MagicMirror . You can find a detailed…
I added a Pi Case to it so you can hide the octopi and it looks clean. I did not find any Remix with Case for Pi4 that was easy to print so i took this two designs and merged them. I also added some holes for ventilation between them. I…
Gehäuse und Deckel haben verschiedene Ausführungen, je nach belieben. Bei Montage am Mk3s Rahmen: Gehäuse an Rahmen schrauben Pi schräg an Schrauben vorbeiführen → WICHTIG ERST MICRO SD EINSTECKEN NACH MONTAGE
I needed a wall mount for a Pi camera. This is a mount that allows pivoting around the Z axis. I designed it around #8 wood screws for attaching to the wall, and an M4x20mm bolt and nut for the pivot. Category: Computer
A frame for two Adafruit 32x64 P5 RGB LED Matrices , controlled by the Adafruit RGB Matrix Hat . Wanted the frame to stand on it's own, so added two feet. The frame holes are M3 and Raspi standoff holes M2.5. Tolerances are a bit tight,…
This is an Electronics front enclosure for Ender 3/Ender 3 Pro, it is designed to fit: Bigtreetech SKR 1.4/1.4 Turbo Rasperry Pi 2/3 4x LM2596 1x Noctua Fan 40x40 The design has been splitted in 4 parts, use selftapping screws 2.5 x 15 mm…
This mount contains a Raspberry Pi 2/3/4 Mount and a place for a SSD or slim HDD below the PI. I used M2.5 screws to hold the PI in place and printed the model with the top side down on the bed. On the four legs, there are holes to mount…
In stock form the Argon Poly+ for the Pi5 comes with a very restrictive Lid. Its allowing air in but no air out. If the stock pi5 cooler is used the cooler is basically cycling its own air. To fix that i created this mod. For those who…
This is an awesome Tower for Raspberry Pi. - The design is adapted for original Metal case for Raspberry Pi 3-4 - You can put one or two harddrives in the bottom of the tower. - Unlimited height (I have 5) - All in one place
Print in PET-G. Holes are supposed to be tight with the standoffs. I can upload a looser one upon request. UPDATE 01/02/2025: Added STEP and Solidworks Maker (2025) files.
I use my Raspberry Pi Zero W's headless. I don't need access to any ports other than to get power to the computer and GP
This is a portable WINLINK© client with PAT (a cross-platform Winlink client written in Go). The device is designed for pick up a Raspberry Zero WH Software instruction: see atteched documents Software_Installation_Instruction (GER) Part…
Thanks to Maurice Kevenaar for create the box for rasperry pi + hiperpixel 40 . It fits perfectly.
A case for a Raspberry Pi 4 with and without a hole for a fan (Specifically a Delta Electronics FFB0412SHN DC Brushless Fan) Works with no Supports I printed it on an Ender 3 v2 Used tape to make sure it doesn't come apart and keep the…
Pegboard Hook for Sperry Outlet Tester. Needs supports to print correctly.
The pi mount was designed for a simple NAS system based on a PI4 and this Dual HDD/SSD case. The case has an integrated RAID controller, so one drive gets mirrored with out the knowledge of the Raspberry PI and prevent data loss through a…
Pegboard Hook for Sperry Voltage Tester. Needs supports to print correctly.
I needed a sleek, modern-looking case for a 10" touch display, but couldn't find one, so I designed my own. This case includes a fan mount, cooling ports, a stand, a monitor arm and extra internal space for future components. Update:…
This is an Electronics front enclosure for Ender 3 V2, it is designed to fit: Bigtreetech SKR 2 Raspberry Pi Zero 2 1x Noctua Fan 92x10 Needs the feet extensions already installed. For specific to the parts I had available and the limited…
This modification does not require permanant modification of your printer This modification requires electrical work, consult an electrician to inspect before usage Your warranty will be voided as well. Parts Required: Btt SKR mini e3…
Boîtier Rasperry Pi 5 avec fixation murale et avec intégration pour ventilateur A4 10x40
Use case I made this housing for the RaspberryPi Zero 2W to act as a camera for PrusaConnect inside my new Prusa CoreOne. I am still working on the way to mount it inside the printer, but the housing itself seems to be worth publishing…
I have two Sperry outlet testers, but the lens broke and I could not find replacements. This model is a replacement lens. Use a transparent filament. All I had was a transparent blue PLA, but it seems to work just fine.
A 2-Components part to cover your Rasperry Pi Camera. Perfect for Timelapse oder Octlapse use on 3d Printers
Boîtier Rasperry Pi 4 Model B avec fixation murale et avec intégration pour ventilateur A4 10x40
P-Touch P700 Print Server On Linux, the software support for P-Touch printers is quite limited. There is a quite useful command line tool called ptouch-print ( https://dominic.familie-radermacher.ch/projekte/ptouch-print/ ). But, if you…
Contenitore per il mio progetto di termostato ambiente con box per il DHT22 con schermo touch da 5 pollici. Enclosure for my room thermostat project with box for the DHT22 with 5 inch touch screen.
this is a raspberry pi 3b at 150% scale
I designed a holder for my Raspberry Pi 3 to attach it to an Ikea cabin. I put som M5 bolts in the pre drilled holes to attach the holder. 4 M3 Hex nuts has to be added. In my case they have a tight fit but you can also clue them in.
Din mount for snap together case
I liked the clever snap fit design of "PDor_Projects" but wanted to use a CSI HDMI Adapter in that housing.
Pair of brackets to attach a Pi 7" screen to the upper front of the U2 frame. These will fit any derivative of the Ultimaker 2 series. Category: 3D Printer Accessories
I flattened the mounting portion of the item I remixed, so it can be screwed down or extended with the extension piece i made for the original stand. :) i only included the changed STL file and the extension, the Original front and back…
This is version 2 of my RC for an analog water boiler ( https://www.printables.com/model/1448499-warmwasser-steuerung-fur-solaranlage-smart-iot ) I wanted the Pi4 from the first version for more advanced applications so i used this time a…
Bei weitem mein bisher Lieblingsfall. Klein, kompakt und interessant. Die einzigen Schrauben, die benötigt werden, sind die Befestigung des 40-mm-Fans in die Öffnung. 4 #4 x .375 Phillips-Flachkopf-Blechschrauben verwendet. Ich muss noch…
Picture are showing the prototype model. Some improvement have been made since. Enjoy !
A simple but highly accurate rasperry Pi 3B and V2 camera models for use to model around or to use with large assemblies. These models were created using the offical rasiperry Pi drawings (attached as downloads)
Hello, This is a simple remix from @gercole case for motherboard and raspberry. I just modified the openings to fit the skr2 correctly. Print the covers and raspberry pi mount from original thing. Print Settings Printer Brand: Creality…
This case for the Raspberry Pi Compute Moulde 4 TV Stick has to be slid over the entire module before the heat sink is attached. The HDMI connection cover is available in two versions, with and without air ducts. The idea behind that the…
Not the prettiest but it works. Prints fine at 10% infill, 0.2 layers. Uses 2-4x M2x8 self-tapping screws to mount the Pi.
This is a camera holder for the Raspberry Pi. I designed it in fusion 360. Print Settings Printer: Artillery Sidewinder x1 Rafts: No Supports: No Resolution: 200 Infill: 15-30% Filament: Doesnt matter (I use Geeetech Petg black) PETG…
