Splinter
Splinter from Teenage Mutant Ninja Turtles.
- Pobrania
- 499
- Polubienia
- 110
- Ocena
- 5
Liczymy pasujące modele…
Splinter from Teenage Mutant Ninja Turtles.
This is a anti-splinter guard for the BOSCH GST jigsaw. It fits better then the original part. I made some different widths of the slot because the saw blades differs a lot. The original part does not fit so nice like mine and with some…
SCM minimax cu 410c splinter guard You can take a look at the cover picture to see the original and 3D printed part side by side. Excerpt from the machine manual: Safety Be very cautious, when using this 3D printed replacement for the…
I was tired of constantly fixing and replacing HappyModel Mobula 8 frames, and while considering some lighter options, I decided to try making one myself. Based on carbon strip construction and printed joiners, similar to my 21700 NLR ,…
Add these wings to your track saw when cutting in a new splinter guard. The wings will let you get to the edge of your track to cut the entire new splinter guard. Can secure to your track with M3 screws. Countersunk screw holes in top if…
Just added a lip on the top surface of filimonic's anti-splinter device design for a more secure fit.
Purpose: This is a replacement for a Festool jigsaw splinter guard. Reference to original part: Festool article-no.: 490120 Fits to PS 300, PSB 300, PS(C) 400/420, PSB(C) 400/420 Comments: The splinter guard shown in the title was the…
Makita 192557-6 Anti Splintering Device. Replacement of the original 192557-6 Makita part. Slicing note: Initial layer height : 0.1 mm Layer height : 0.1 mm Wall line count : 0 Infill : 100% STEP included. Version history 22.12.26.02 :…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I needed a new splinter guard and found some designs that did not quite fit. I also added an orientation arrow that can be seen from above. Fusion file is also added with variables to adjust. got inspired by this moddel:…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment Inner peace doesn’t pay for pizza night! There are…
Update 18.03.2024: Added custom versions of the model with left and right nuts, allowing printing with minimal support. Fixing knob is here https://www.printables.com/model/384802-festool-bolt-knob Printer brand: Flying Bear Printer:…
Bring the legendary sensei to life with this incredibly detailed 3D printable STL model that captures every whisker and fold of his iconic robes. This masterfully crafted figurine showcases Splinter in his classic meditative pose, making…
Update: Designed an improved version, following a link https://www.printables.com/model/527510-festool-built-in-thread-splinter-guard-sp-ts-55-r- Fixing knob is here https://www.printables.com/model/384802-festool-bolt-knob Printer brand:…
here is Sam Fishers goggles can be scaled to fit your head
This is a tabletop prop piece for a unique encounter in a ttrpg or could be used as a standalone mini-game OR a really quirky looking model stand. Preamble This project took many many many hours and while it has been "done" for a while I…
Early version: https://www.printables.com/model/363198-festool-built-in-thread-splinter-guard-sp-ts-55-r CHANGES: — The size of the thread has been increased (now the screw is wrapped more easily). — The thickness of the body into which…
I made this replacement part before I loose the original one since I doubt I will be able to ever buy one… I made 2 versions. One that is the same as the original and one with a narrower cut for the blade. Don't know on which other models…
GERMAN Halterung für vier Durchtreiber / Splintentreiber. Details zu den Massen, siehe Bilder. Passend zu PB SwissTools PB 873 CN. ENGLISH Wall mount for four pin punches. Dimension details in the pictures. Designed for PB SwissTools PB…
This is my very first upload so be gentle. UPDATE! We've found that this tremendously reduces itching from mosquito bites. If you feel like itching the bite, just pull this out of your pocket and press it into your skin around the bite.…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #10 (0.72mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #16 (1.3mm) swap to Red At layer #22…
"The path of the ninja is not an easy one." Return to the sewers of 1988 with this faithful 3D-printable replica of the original Master Splinter action figure. This model captures the zen-like presence and slightly hunched, wise posture…
I didn't see it directly but my jigsaw was crooked due to two holes being drilled non-horizontal internally. It resulted, at first, in my jigsaw cutting into the plate and ended up shattering it completely after some use. I remade the…
Compatible with Parkside PSTK 800. I printed it with a layer height of 0.3 mm Support needed
Splinter guard for the Parkside Cordless Jigsaw IAN 301845. I print it with PC for better friction durability.
A splinter guard for Makita Jigsaws. I wanted extra clearance for the blade, so I extended the slot for the blade. originally posted on Thingyverse: https://www.thingiverse.com/thing:5216105
Witam! Przedstawiam podkładkę antyodpryskową do wyrzynarek firmy Festool. Podkładka zaprojektowana w taki sposób by poprawić widoczność linii cięcia, umożliwić dokładność cięcia oraz ułatwić demontaż. Drukujcie w 100% wypełnieniu.…
I honestly just want to see if anyone can print it. And it looked kind of neat. So theres that! Print instructions Category: Sculptures Summary I honestly just want to see if anyone can print it. And it looked kind of neat. So theres that!
Printing: Model has integrated, easily removable supports. I reccomend printing from PLA which holds very well after many cuts. I also tested PETG but it broke quite fast. Happy printing and cutting!
Splinter protection for grind and polish machine Einhell TH XG 7S / Splitterschutz, Abdeckung für Einhell TH XG 7S Meine Abdeckungen bei der kleinen Einhell Schleif und Poliermaschine sind leider gebrochen und sind leider nicht mehr zu…
Saw those set of firework effect LEDs on amazon, but they looked cheap in quality. For the same price of roundabout 30€ I get all high quality parts and WLED control. WS2812B 4-5m ESP8622 or 32, or any MCU you like 14ps of 3pin SM JST…
This jig was designed to help make a clean first cut on the splinter guard of a Milwaukee track saw guide rail. When trimming the splinter guard, the saw can become unstable near the end of the track because the saw base starts to run out…
Anti-splinter garden gate knob handle. I made this handle for my son to save him from getting splinters. Buy Me a coffee. Please contact me if you need any changes.
This is the Splinter Arrow from the video game Grounded. This 3D printable file isn't endorsed by Obsidian Entertainment, Inc. and doesn't reflect the views or opinions of Obsidian Entertainment, Inc. or anyone officially involved with…
I ripped had to change the splinter guard but the shops are closed on weekends, so i made one The stl is 20cm long but you can stretch in the slicer or combine them. TPU is perfect for the job, and does not need to be the fancy one, any…
Sam Fisher Full Face mask for Splinter Cell
This is sam fisher from the splinter cell video games. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 159.91x200mm in size You may print at higher layer heights below the Base Thickness of…
I designed this intentionally tongue-in-cheek, 'True' toothpick drone frame to be built with actual toothpicks for a Botgrinder Print & Rip challenge. This is NOT a practical build, but the people requested I share it and who am I to deny…
Splinter Cell: Sam Fisher Ultimate Fan Asset Bundle This ultimate fan pack features a collection of premium 3D assets inspired by the iconic operative, Sam Fisher. Perfect for gaming setups, tabletop setups, and custom hobby projects,…
The splinter guard rails can be easily mounted (right and left) onto the multifunction stop. By accurately sawing into the splinter guard, tear-out on the back of the workpiece is minimised. Additionally, the splinter guard rails provide…
Basic stand with numbered pockets for PB Swiss Tools Splintentreibersatz PB 755.BL 2-8mm
Witam! Przedstawiam podkładkę antyodpryskową do wyrzynarek firmy Festool. Podkładka zaprojektowana w taki sposób by poprawić widoczność linii cięcia, umożliwić dokładność cięcia oraz ułatwić demontaż. Drukujcie w 100% wypełnieniu.…
Printing: Model has integrated, easily removable supports. I reccomend printing from PLA which holds very well after many cuts. I also tested PETG but it broke quite fast. Happy printing and cutting!
Update 18.03.2024: Added custom versions of the model with left and right nuts, allowing printing with minimal support. Fixing knob is here https://www.printables.com/model/384802-festool-bolt-knob Printer brand: Flying Bear Printer:…
A splinter guard for Makita Jigsaws. I wanted extra clearance for the blade, so I extended the slot for the blade. originally posted on Thingyverse: https://www.thingiverse.com/thing:5216105