Liczymy pasujące modele…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
A simple yet super useful little bracket with a lot of strength. Works perfectly for reinforcing corner joints in wooden structures such as shelving units, boxes, and whatever has 90 degree corners that can hold screws or bolts. I use…
The shelf support brackets even when printed with PLA can hold over 100 lbs (tested) and have built-in mounting holes to attach to the wall. I printed mine on the sides with support material to hold up the hexagon webbing at 50% infill…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
🇦🇹 Willkommen in Österreich! Welcome to Austria! The main façade of the Vienna City Hall , in collaboration with ZODIAC , is a milestone of MiniWorld3D. Breaking all boundaries, it was conceived to push you and your printer to the limit!…
Designed and successfully printed by a horse loving Year 7 high school student. Supports required under the chin of the horse. Magnet holes on the underside 20mm diameter.
Update 2025-07-26: Added a sturdier version featuring support beams for improved rigidity. This design is inspired by reinforcement techniques I used on a spool holder that previously flexed under load. Tip: Print both support beams…
Crucifixion in Retz, Lower Austria - 1727
No supports Maximum details Model in size 1, 0.75 a 0.5 scale.
To print this model you need a 220 x 220 mm build plate. Print the bridge with support.
Industrial Wargames Wall - Section 1 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Hello ! Wellcome to my little office with Prusa MINI +. I made industrial lamp with concrete base, retro bulb and soft pad made of recycled rubber. O.10 DETAIL Prusament PLA No supports 15% We will need: Concrete (fine concrete with small…
This is for the ultra nerdy be warned… I vastly prefer this industrial Brady label maker over consumer options because of the different size of labels and there ridiculous adhesion and durability and color options. This insert neatly…
I had made this from actual pipe before and decided to try and see if I could do in a 3D print. This is a full sized lamp but prints on MK3S (you can print on a MINI as well just use wood or make the base smaller) Lamp size : 200mm x…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Introduction This repository is Meanwell LRS-350-12 Version. If you are looking for FlexATX version, please check this out. ⚠⚠⚠ A compact industrial-style enclosure designed for the AMD/ASRock BC-250 accelerator. This case was built…
Changed features provided in images; Much better airflow - including larger ventilation holes, rounded airflow paths, and additional airflow paths Ethernet Port - I read reviews from the original model and added a larger adapter port for…
This is an insert / organizer for Grand Austria Hotel with the Let’s Waltz expansion (retail versions of both) and the Meeple Source upgraded wooden food across the base and expansion boxes. It supports premium sleeves (Gamegenic Prime…
This structural bridge is printed with Prusament PLA. It is designed as a multi functional bridge as you can see from the photos. If you would like to contact me directly via email: [email protected]
I needed to spread an evenly thin and wide layer of SikaFlex glue in a recent project. So I made myself a modular system for a variety of parametric nozzles. When you first open the project file in FreeCAD it looks a bit messy… So let's…
FULLY MOVEABLE KUKA KR10 INDUSTRIAL ROBOT Consists of 7 separate parts. A great thing to understand the movements of the robotic arm. Each part contains holes for the protrusions of the adjacent part. this design was made by Yokata, the…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Description: It's an AA and AAA battery organizer with an industrial design. It can be placed vertically or horizontally. AA and AAA batteries can be stacked using holders of the same size. License note: This file is provided as a free…
This little STONE/ROCK PEDESTRIAN BRIDGE is scalable within reason. Print it black or dark grey and then paint multi-colored rocks. I exclusively print with PLA and have found that ordinary clear lacquer thinner (Nail polish remover) is a…
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
Was downscaled from N. The roof is an original design.
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
Industrial design furniture made from 3/4 inch water pipes. With these connectors, different types of furniture can be built from commercially available water pipes and wooden boards. The 3/4 inch water pipes (26.3mm) are available in DIY…
Dust collection is a difficult challenge with any bandsaw. Mine is a King Industrial KC-1433FXR and came with a very inefficient and essentially useless dust collection solution so I came up with this 2 part dust collection duct that is…
Another industrial building
11 different floor tiles for an industrial terrain. Each tile is 52.4x2 millimeters in size. They're not very tall, so they print quite fast. They've been designed for an FDM printer, but even a resin one will do the job*. Be aware that…
Keep your workspace tidy with this fully Modular Stackable Drawer System . Designed with an industrial aesthetic, these drawers are perfect for storing screws, electronic components, hobby tools, or small parts. The clever interlocking…
A set of futuristic ground vehicles for a generic SciFi setting, at 6mm scale. This set is designed to match the SciFi Road set of parts I have uploaded. This set is intended to be compatible with the other 6mm SciFi terrain sets I have…
Red Bull Ring Circuit, Spielberg, Austria, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
I have used two thingverse models and scaled them to match all others: cup of coffee: https://www.thingiverse.com/thing:6709568 and wine glass: https://www.thingiverse.com/thing:1377060 And I projected a piece of cake and a strudel. The…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
OVERVIEW: One assembled shelf bracket includes: 6 3D printed parts 4 screws M5x16 (you can use M5x14 or M5x18) One part needs to be printed with support 3D models are in the correct position in relation to the bed, no need to rotate them…
A lovely industrial lamp for your living room. Print instructions Buse : 0.4 mm Précision : 0.15 Température de plateau : 50° Température d'extrusion de la buse : 210°
Looking to dive into the world of industrial automation? This Industrial Automation Conveyor Belt project is the perfect way to get hands-on experience! Created in collaboration with PhaseDock and showcased at ECEDHA 2025 , this project…
Another industrial/steampunk inspired retro light Shorter print / fewer parts Check my other Industrial/steampunk inspired lamp @ https://www.printables.com/model/164129 Printing details Nozzle .4 Resolution .2 (speed is fine) Supports…
🇦🇹 Willkommen in Österreich! Welcome to Austria! This model was originally created by Clara's LIttle Artworks ( @claraslittleartworks ) and optimized by Dany Sánchez for MiniWorld3D. The Graz Clock Tower (in German: Grazer Uhrturm ) is 28…
E.T.: The Extra-Terrestrial Thank you for downloads, likes… Enjoy !
Jarrón clásico estriado sin soportes
Small model of racing circuit in Austria. Turns are numbered and DRS zones marked. Same with direction of race and START
3D model of Austria F1 track 2023 Scale to your desired scale and drop down the Y to get the desired height of the model.
I love the Industrial phone stand model that @josh3D created. I wanted to use it on my phone, but the phone was too large. So I increased the width of the base and also extended the back up 20mm. While I was at it I created a Voronoi…
Finally, I managed to find a good concept for me to build my SciFi Industrial terrain line. Inspired by one of my oldest terrain designs, I finally was able to update this and present some really cool SciFi buildings you can use for your…
This is an industrial handle that works best in pairs. It is designed to be mounted on a vertical surface. With the 45 degree angle, it gives your hands a natural position for carrying a heavy fixture. In my case I use it for Inspection…
The Historical Chess Set Series #2 - Austrian "Biedermeier Coffeehouse” Chess Set The Austrian Biedermeier Coffeehouse chess set is a particular style that emerged in the early 19th century in Austria during the Biedermeier era , which…
Only a cookie cutter Austrian-Traditional "Linzer Auge" two parts Print Settings Printer: Own Build /ndl V2 Rafts: No Supports: Yes Resolution: 0.16 Infill: 50-70% Filament: Generic ABS any Notes: Print Speed 60mm/sec, Temp noozle 245…
A 1:48 Scale Garbage Dumpster
Model of a trophy used until 2023 for the Austrian Grand Prix in Formula 1. Made without position number - for people who want to print it for other than P1 (for example for eSports' trophies purposes) Update 05.10.2024 → Added a generic…
Hello. I designed this hook to hold a motorcycle helmet, a backpack or any other not so light things. It has 4 attachment points for better grip to the wall. Designed using fusion 360. I like the look of steel structures, tried to make it…
Features: Flexible buttons. Reset button indicated with inset circle: Strong enclosure for impacts and transport Snap-fitting lid No hardware for assembly (only for optional fan) Mounting provided for 30mm fan (ensure your fan isn't too…
I designed this for a Parkside wall-based vacuum sucker to be compatible with my Kärcher NT 70/3 Me Tc vacuum, that uses the thicker DN40 (40mm ID) standard instead of the DN35 found in household vacuum cleaners. I recommend deburring the…
This 3D printable pedestrian bridge is designed to enhance Gundam dioramas, offering a realistic urban or industrial setting for scaled models. The bridge consists of multiple interlocking components that require assembly after printing ,…
A very nice touch for your Grand Austria Hotel board game. I printed it all shell (99 perimeters), 0.15 resolution with a 0.4 nozzle, no supports. Category: Toy & Game Accessories
Industrial locker hook. Printing with no supports, 0.6mm, "speed" mode Exists in simple and double version Quick and dirty version made with Tinkercad
This decorative lamp is meant to represent a pedestrian traffic light. Inside the housing there is space for LED Strips. I powered my version with an ATTINY 13a, which runs a little script for the light sequence. The code can be found…
Cookie cutters with Horse back riding theme - Equestrianism
The Strider Collapsing Rod Stock From DI, A wonderful budget friendly printed alternative to metal & polymer collapsing rod stocks. Fully Open Source Files SBL1/Protean/Worker Collapsing Rod Stock Full Metal Rod Construction Quick Deploy…
Remixed from the meeples from @Nersi ( https://www.thingiverse.com/nersi/designs ) and https://www.thingiverse.com/thing:1917775 Added a base for the Emperor token Category: Games
With two designs, one whole for larger printers and another cut for printers with a bed of 180 or more.
Jarrón Escultural Blanco: Eleva tu Decoración Este jarrón blanco de diseño minimalista es la pieza que faltaba en tu hogar. Sus líneas limpias y su textura estriada añaden un toque de sofisticación a cualquier espacio. Perfecto para…
A little project I modeled over spring break! It's an extremely small (271 mm) tank engine using almost entirely 3D printed parts! You just need to supply 15~19 suitable screws (I used #4 x 3/4" screws) & some glue! It is unpowered…
El modelo lo he subido en formato STL para que se pueda laminar en cualquier programa. Yo lo he laminado con Prusa y reducido al 50% de tamaño.
Einfacher Rahmenhalter für 2 (Hoffmann-)Rähmchen für österreichische Einheitsmaßbeuten. Simple frame holder for 2 (Hoffmann-)frames for austrian "Einheitsmaß" bee hives. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No…
This is an insert for Grand Austria Hotel + Lets Waltz expansion + Upgraded components All the Expansion modules are kept separate from the base game content. Each module has its own slot. Support sleeved cards (except for Solo cards.…
Industrial Controller Holder - my take on an industrial design inspired holder mount for a controller. Easy to print and assemble, this controller holder will make a nice addition to your gaming setup! Features: Easy to print parts,…
My mother wanted cabinet knobs for her kitchen that had an industrial/steampunk sort of feel, but didn't find anything suitable at the normal retail stores. She asked me if I could print up some industrial-looking gears which could be…
Remix of the Framework Industrial Mainboard Case by @Magmabow. It removes the expansion card slots so that it's easier to plug directly into the USB ports on the main board. It also makes it so that it can be printed in two pieces on a…
Perfect for TV remotes, gaming controllers, pens, tools, or everyday accessories.
This is an accessory pack meant for dioramas. Intended for 1/12 scale, they can be scaled as needed. One of the floor grates comes with an integrated foot peg and can be used as a figure stand (results may vary depending on figure).
A pack of industrial based miniature bases for all your wargaming needs (D&D, 40K and all the other abbreviations). This pack contains multiple bases and I'll update it whenever I add new bases to this category. I'll be discontinuing the…
🖖 LCARS Industrial Replicator Panel — Utopia Planitia Fleet Yards Make it so. Turn your 3D printer into what it always secretly was: an Industrial Replicator, straight off the drafting tables of the Utopia Planitia Fleet Yards. This…
As a equestrian dad… whip started to clutter my daugter space and I wanted to find a nice looking solution. This design allow to hold up to 8 whips an allow to add your favorite place logo. Update: I had one printed in PETG and one in ABS…
It needs supports only for the feets. The doors stay in place with some semispheres.
You need to print 3 x Card Tray 1 x Component Tray 1 x Resource Tray If you like my work, please consider making a paypal payment: https://paypal.me/visar78
This is an industrial style handle for your drawers and cabinets. It prints in on the large face without any support. I reccomend unsing at least 3 perimeters and 30% infill for the reqired strength. I included a parametric F3D file, so…
After trying to find a second mount for the UMR-I (it is supposed to be mobile after all...), I decided to just print my own. I plan to use the UMR-I for my parents as a backup for their very bad cable internet. But they want to also use…
Fits Whalen Industrial racks. 3/8" upper slot opening, 3.0" slot-slot spacing. Print recommendations: as this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50%+ infill wall overlap. Print on it's…
Print Settings Printer: Bambulab P1S Rafts: NO Supports: NO Resolution: Top-cover, Top-Pipe, Base-Pipe 0.2mm Resolution: screw, nut 0,8mm Infill:Top-cover, Top-Pipe, Base-Pipe 15% -20% Infill:screw, nut 50% 4 walls Filament : PLA
El “PLC” (Programmable Logic Controller, por sus siglas en inglés) es un dispositivo electrónico que se programa para realizar acciones de control automáticamente . Un PLC es un cerebro que activa componentes de maquinarias para ejecuten…
Industrial Phone Stand This is a rugged, industrial-inspired phone stand designed for durability and functionality. The design features a robust, mechanical aesthetic with reinforced ribs, mounting holes, and enough open clearance for the…
PRINT SETTINGS: Material: PETG recommended ABS/ASA for high temperature environments Recommended settings: - 5 walls - 45–55% gyroid infill - 0.24 layer height - Print on side for maximum strength Mounting: - Countersunk screw holes -…
This is a small arched bridge model suitable for decorative use, tabletop setups, or diorama terrain. It features a clean, symmetrical design with evenly spaced posts and railings, and a gently curved deck that prints cleanly with…
Colored terrain map of Austria , with or without ams. Based on sattelite information. I could never figure out what the maps were indicating when i was little. So i made one that i would have been delighted with as a kid. Made with…
Red Bull Ring Circuit, Austria Formula 1 When using the STL file you need to scale the circuit up to 130% to fit the stand.
A sleek, minimalist "wave" pattern that feels both organic and futuristic.hollowed-out design provides a sense of lightness and transparency, making it a perfect centerpiece that doesn't overwhelm a space.
Cool industrial aesthetic for your desk, garage, or man cave
Für meine Schüler bei der Feuerwehrjugend habe ich das dreifarbige Logo der “Freiwilligen Feuerwehr” erstellt. Entweder 3 teilig zum Verkleben, oder Komplett mit manuellem Filamentwechsel. Either 3 seperate parts or 3 colored with manual…
A 3D poster of Austri Grand Prix track map of F1. Design is made so that you can put LED lights behind the track - Trans
Adjust the shelf in Fusion360 and show off your prints with this modern bookshelf design. Default dimensions creates spaces sized 40mm Long x 30mm Wide x 27mm Tall.
!!! This model is currently not updated anymore due to limited time. Tolerances might not be perfect. Some featured might be added some might be removed!!! I designed this Watch Stand compatible with the Apple Watch chanrging puck. It's a…
Spaceship fuel....alien and astronaut drink...something. Made for #LMShow Print Drive 2022 but late No support is needed for the lid thanks to the 45 degree lip between the threads and the top. Threads are 90 degrees, rounded, and thicc…
terrestrial dragon, breathing fire
![[Compact] Framework Industrial Mainboard Case](https://media.printables.com/media/prints/6cd80c56-b03f-4332-a792-97700c120b5e/images/10655890_16338e5a-1fab-4623-8bf4-d74735e77fbb_ec5db624-2b2f-46c2-adff-4f47f07da8ff/compact-industrial-case.png)
