Liczymy pasujące modele…
Zero play guide bars for jigs on table saw. I primarily made this for a new cross cut sled but they are applicable to anything. Would recommend using PETG as it is very low friction and won't warp much at all. My process for assembly to…
Sunken submarine model for an aquarium. I made it so little fish can get in (around 45-50mm in diameter) and it's a favourite hiding spot them. You need to put a little weight into the submarine so it sinks (a smal rock will do or if you…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of countersunk screws with Phillips drive according to ISO 724 , ranging in sizes from M2.5 to M10, each available in lengths of 10 mm, 16 mm, 20…
The screws are inspired by DIN 7991 metric screws with countersunk head and allenkey socket. My new thread desing has improved thread geometry and does not require diameter tolerance with respect to the standard dimensions any longer.…
Hello, I have remixed the original files to make a version for conical screws, there are many hole sizes The design uses Conical Head Screws There is a step files available, so you can adjust the model for your purposes Have fun!!! ---…
I wanted a wrecked submarine for my aquarium with a bit more detail than was available here. So I took the original C3 submarine I-52 from HastuneR, and simplified it a bit, hollowed it out, added holes and all of that for fish to be able…
You can support my work by downloading here as well, thank you: https://makerworld.com/en/models/167900#profileId-201468 Collection of brackets and braces of different sizes and types. This is a modified version of the original Ultimate…
Note: Picture shows one size, but all 3 sizes from the original post have been adapted for countersunk holes and are included in the 3MF/STEP files. I love the strong and clever design of these hinges that @ESoderberg came up with,…
Insert for attaching honeycombs to the wall with empty fastener. UPDATE 14.12.2023 According to @Molot suggestion, I added model variants that can be printed without supports. See files: insert-countersunk-empty-no-supports.stl and…
Combines a countersunk insert (to screw to the wall) and empty insert (to attach stuff) into one, so you don't waste space. Remixed from roryshko's model: Used the stepped hole trick so it can be printed without supports Added 2x and 4x…
Tired of ugly screw heads ruining the sleek look of your 3D printed parts or woodworking projects? Welcome to the Ultimate Countersunk Washer Collection . This comprehensive hardware set is engineered with precision to perfectly hide…
Model can be printed without supports, and scaled to any designed size. Photos of the model have been scaled. The model in the aquarium has increased Z height The model on build plate was printed at 50% (this was too small for my liking,…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the Handle and Spin Ring parts without the countersink. This allows the use of non-flathead/countersunk screws. enable support for the handle…
Countersunk washers for M3-M10. Use in cases where a countersunk screw would split the model apart. Category: Other
Updates 2021-12-30 added V0_rounded. This version looks a bit nicer, prints with less material, but might be tricky for printers with bad bed-adhesion In addition to that you can now disable the countersink in the spreadsheet! 2021-12-29…
This is a very simple model of the Russian cruiser " Moskva " with an artistic impression of the hull damage she sustained before her sinking on the 14th of April 2022 . Printing Nothing special. Both models have slight overhangs but…
What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…
Countersunk Washer - Conical Washer - Metric -Rondella Sottovite Conica Available sizes: M3 - M4 - M5 - M6 - M8 - M10 - M12 CSW3.3x12mm CSW4.3x16mm CSW5.3x22mm CSW6.3x24mm CSW6.5x22mm CSW8.5x25mm CSW10.5x30mm CSW12.5x40mm CSW4.3x14mm…
This is a remix to give the clip a countersunk screw hole. I can't point to offsite for remixes for some reason, so here is the original: https://www.thingiverse.com/thing:4799348 I love these clips, but I find certain situations where…
Hello guys, since I couldn't find an insert Counterstrike with 3 modules anywhere online, I designed one myself. Have fun.
Important: You need to Print in save materials like ABS, PETG or PLA to avoid harming your fish! (at your own risk) You can anker it to the ground by either using string through the voronoi structure or place small rocks in the bottom.…
remixed wilisweetescapes https://www.thingiverse.com/thing:2824083 to this by rebuilding from scratch and putting a hole for a countersunk screw
This sturdy 90° angle bracket is designed for creating strong and precise right-angle connections between wooden beams. It is optimized for the common 60 mm timber sizes , making it a perfect fit for many standard construction and…
This rounded L bracket has countersunk holes for the screws at each side and is easily customizable to your needs. Both sides can be customized with different length, hole sizes and countersink. Outer edge clearance and extra material at…
What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…
Clips to have the Hue Lightstrip placed in a 45° Angle. I used this to place it for indirect light behind the bed.
I printed mine in PLA with following settings: 0,20 - quality preset 4 Perimeters 5 Massive top and bottom layers and 25% Kubic infill
The original dragon burner ADXL mount needs a longer M3 screw. so I adjusted the mount with a sunken screw hole that uses the same m3 screw. !!DO NOT OVER TIGHTENING!!
Just a simple handle. Uses two wood or sheetrock screws. Adjust infill density as needed.
I needed a specific connector type that i couldnt find within a half hour search, so i made a remix - A 3 connector with a countersunk 3m spot and the other two spots are holes which you can still use other mounted parts with.
This steampunk-style submarine makes for a great addition to any fish tank or shelf display. It features plenty of small details like rows of rivets along the hull, three portholes on each side, and a classic periscope on top. There is…
Honeycomb Shelf Bracket remix with 3.5mm hole and chamfer to fit countersunk head screws.
Remix of Stigern's great model, with screw holes adapted for 2.5mm Ø countersunk screws (2.5mm x 20mm screws used in my case, EAN: 4053199302444 )
I like the design that @ESoderberg came up with, however I wanted to use these hinges with wood screws. Accordingly , I desired holes that worked well with countersunk screws instead of cap/button head screw styles. Such screws are common…
Tired of nonthreaded 3d screw models? tired of looking for screws to print only to find no models? Well look no further for my M4*20 H3 COUNTERSUNK SCREW, unlike my other one it is threaded!
The Mire swallows everything, but it's a slow eater. You'll find these old temples sometimes, the last stubborn monuments of forgotten faiths. They're the only solid ground for miles, a perfect place to make camp. That's your first…
These screws are inspired by DIN 964 slotted raised countersunk head screws. The longer screws have partial threads. My inproved thread design has an accuracy of 2.5µm and should fit without tolerances. Please print with low layer height,…
BOM: Printed with ROSA3D PLA-Silk Steel A complete 90-piece set of flush-fit washers for all your metric hardware. Scaled perfectly so they provide strength without turning into thick, bulky spacers. What's Included: 10 Metric Sizes: M3,…
The wall clamp provides fixation for 35mm pipes or corrugated hoses. Designed with a 34.7mm clamping function and 11mm height. Hole for countersunk M5 Screw. Printed on my Prusa with: 0.3mm layer height, 50% infill 0.4mm nozzle.…
I needed this one because I did not have any normal (not countersunk) screws plus I wanted to cover the screw head when done. :) Print Settings Printer Brand: RepRap Printer: Emaker Huxley Rafts: No Supports: No Infill: 25% Category: DIY
For my countersunk drills from Estmoon, I created this holder for Ikea Skadis. The drills have measure: 6.3mm, 8.3mm, 10.4mm, 12.4mm, 16.5mm, 20.5mm To fix this on the wall you need two of the great Skadis Universal Hooks . I print this…
Kabeldurchführung für Tischplatten mit 30 mm Dicke. Loch entspricht den Dimensionen einer normalen Steckdosen Lochsäge mit 68 mm. Kann durch die angepasste Fase komplett ohne Support gedruckt werden.
What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…
A detailed nautical anchor sculpture made of matte plastic in a 3D printed style, surrounded by coral, shells, chain links, and underwater textures. This ocean-inspired decor piece brings a sunken-treasure mood to a shelf, desk, console,…
M4*12 COUNTERSUNK SCREW DIN7991
That's what happens when greed outweighs footwork. That Sunken Treasure ship is the wreck of the gambler's city, Al'Sarab Ciudad de Fortuna. The ground around it is soft sand, easy to sink in, and the prize is a hoard of the casino's…
Sometimes you want to run a wire through a shelf in your closet, but if your shelves are made of particleboard, the hole will be unsightly and sawdust will fall from it. It's even worse when you need a large hole, such as for an RJ45 plug…
Die Abstandshalter von @lansolo81 funktionieren hervorragend. Allerdings steht der der Senkkopf der Spaxschrauben etwas über das Skadisbrett heraus. Der Remix behebt dieses kleine Manko durch ein etwas weiteres und tieferes Senkloch, das…
Quad Insert with a countersunk hole. Modified Arrangement from original for edge use.
The clip comes with a segmented STL file so you can lengthen individual elements like the channel and the gap. Something I wanted to get out of this was a countersunk screw hole for a flat head screw, which was easy enough. I rounded the…
I based this off of these bolts: https://www.amazon.com/dp/B018RT09PQ
My drywall anchors use 4mm screw, adjusted hole to 4.5mm. Also added some (0.4mm) space for Würth Ola drywall anchors so they don't bind the insert. Nothing more to say, freecad models included if you need to modify these.
Combines a Screw This! Single Insert with the Quad HSW Insert + Countersunk Screw for extra support!
I removed a bit of material from the floor to create a tray.
I really liked design of the original model, but had a lot of unused M4 bolts with countersunk head, so I made minor change in design of the original holes. Also created new connecting spacer, because original did not have thread inside…
A remix of the regular size Proteus Key Holder that has been unbranded and modified for to use countersunk screws.
I designed this simple bracket in FreeCAD because I want to mount my Meanwell RSP-320-48V underneath my wall mounted shelves. The RSP-320-48V will be adjusted to 59V to feed a Ruideng Riden RK6006 (60V/6A) adjustable step-down converter…
I had a friend of mine, who won an Icom 5100,had it mounted on his desk and wanted a clip for the microphone. After printing Houstin's original, I thought I would enhance it with countersunk holes for mounting. Print Settings Printer…
Tom's model 105789 but with screw holes now countersunk
These are included in the Hertz DSK 130.3 component speaker set. The center hole is 36mm which may fit other tweeters. These fit below the original BMW perforated cover/grill. I designed them so that no supports are required when…
If you don't want to take apart your wall and need a new hole in the place where you already have some hollow insert use this ;)
change design for a usual countersunk screw more material to prevent gear ejection
Countersunk spacer, 10mm in height with an ID appropriate for M6 and 1/4" bolts. The version I actually printed was a little tight, I edited the ID to have a little more clearance but I have not printed it myself to verify. Either way,…
Printed in PLA and painted with acrylics. No support required. 0.2 mm layer height 5% infill
Drywall countersunk screw washer #6 size bugle head Most countersunk washers are a true 40 or 45% bevel, this doesn't match a standard bugle head drywall screw, so I made this. I recommend to print with 3 walls There is a "flatter RARE"…
Useful for seating ball pommels on sword handles. 100% fill, layer height 0.2mm Personally I don't use this one, I tend to create a model that fits the girth of the sword handle, but this one still works well as a standard fitting.…
I printed Kanrog's frame, and when I got my bed spring kit, the M4 bolts were flathead, not hex head. Another “wait, what's standard?!” moment! I remixed the frame with countersunk holes to keep the heads below the flat mating surface,…
Printable 3D model. Sunkern Planter. Pokémon inspiration. STL file.
This is the Mihai esp32-case, but with a countersunk mounting screw hole added to the base. I borrowed the hole design from https://www.printables.com/model/275743-parametrised-power-strip-mount-with-rounded-corner
The Next Layer mentioned he added counter sunk holes to the original model and that a remix was coming, but for the life of me I can't find it. Ergo, vis a vis, quid pro quo, here's a slapped together tinkercadlian version that should…
🧩 Inside Corner Bracket – Heavy Duty (¼" Countersunk) This is a strong and clean 90° inside corner bracket , perfect for reinforcing wooden boxes, shop jigs, crates, or modular frames. Designed for ¼" countersunk fasteners , it offers…
An abandoned Benchy-style tugboat resting on the ocean floor.
lost as sea, the sunken sub is an aquarium accessory for your fish tank, Ensure the model is printed at >80% to increase the density enough to let is set on the tank floor. I would also suggest pouring boiling water post printing to…
That's a nasty sight, that. They say the Sunken Saint walked right into the original cataclysm, and now his giant hand is all that's left, jutting out of the fissure like a last, terrible monument. The ground glows with angry heat, but…
countersunk version modified to use the 8x3mm magnets.
Get Out - The Sunken Place - 2017 3D printable model.
Surge protector mount, with a 1.5" wide x 1.25" tall opening. Will fit between outlets spaced 0.5" or more apart. There is a countersunk hole on each end, that should accept up to #8 (5/32") screws…though, the head may sit a little proud,…
Just stretched it to be a little bit bigger; I use it for some watch repair tools.
The new design is cleaner and the screws are fully integrated into the case. - I've modified the holes for countersunk screws instead of socket head cap screws. - I added two versions: Case with bear logo. Case without bear logo.
Remix of Keystone Panel Mount by M Hole diameter is 3.4mm and the screwhead (widest part of the scew) 6.25mm.
This is an opengrid lite to multiboard adapter I remixed the original multiboard version with a LITE Multidirectional snap.
I got the best results printing the first layer without perimeters and using a brim to prevent warping on PETG.
This model is intended for use with Waxpoetic's Modular Glasses Rack. I printed this with supports on, but I put a support blocker on the hex hole side of the shaft.
Printed in PETG, modified and tested so it can be printed without any supports, with the wall/furniture facing side on the bed. It may be too wide for some printers (225mm) but can be shortened to 220.
This is a slanted deckbox I made for the cards in the boardgame Clank! and the Sunken treasures expansion. It fits all the adventure cards and the market cards. I keep the 4 starter decks in separate baggies so they are not made to fit in…
gridfinity 1x1 for 4 countersunk hex drillbits (+hex key) what else… have a good day :)
The portion of the design that attaches to the machine is the same as the original from @legojoey17, but I created a new base for the drip tray to it on. The tapered design was chipping at the edges because it was so thin, so I created a…
Will be using this to upload merged stls that suited my HSW
Senkkopfschraube mit 1/4 Zoll UNC amerikanisches Zollgewinde für Kameras. In den Längen von 8 bis 40 Millimeter. Der Schlitz paßt für 1 Cent, 2 Cent und 5 Cent Euromünzen. Mit einer Layerhöhe von 0,1 mm oder weniger drucken.…
a testament to my OCD need to print stuff that doesnt matter. My Demibot frame has 4 3mm mounting holes for a 20mm flight stack when I used the 30mm holes. This is nothing more than a chunk of plastic to fill them in while leaving enough…
This benchy sunk to the bottom of the ocean floor, split in two, and now lays there. Happy printing!
Print with teardrop tip UP, with supports for hook. Model available in Onshape! https://cad.onshape.com/documents/c4df0c6df0d606e078f7c978/w/66279d4ca93f781e976ca077/e/377fa9aceec2d61e2f66c5e4
Versunkene Tempelruine mit Säulen – Aquarium Deko
Print with socket facing up to reduce the risk of the socket flaps failing.
This sturdy 90° angle bracket is designed for creating strong and precise right-angle connections between wooden beams. It is optimized for the common 44 mm and 45 mm timber sizes , making it a perfect fit for many standard construction…
All credit for the A.I. original goes to The Eightpints: gratitudinal coordinates be upon them scurvy dogs. OG source: https://www.thingiverse.com/thing:7224594 I found the original to be unprintable. Fudged the missing layer using…
LED strip mount countersunk.
The benchy has nearly gone :-( Only for fun print ;-) 0.2mm layer height 2 walls 15% infill
![Parametric cable clamp/clip for countersunk screws [FreeCAD]](https://media.printables.com/media/prints/108296/images/1076847_b13353c3-9f43-454e-88f8-ae33c09fc146/collage_cable_clamp_v0_rounded.jpg)
