Liczymy pasujące modele…
This is a simple parametric synthesizer stand. It was originally designed for the Vector synthesizer but can be used for any other gear after changing the parameters. The stand consists of two identical parts. When printed wide enough…
This is an easy-to-print Synthesizer Stand angled at 45 degrees. I am using it for several synthesizers at 100 percent and 85 percent. I print up the first batch of four and am now printing another four. Will support Synths or mixers up…
Made for a friend who had two Behringer synthesizers he wanted stacked on top of each other. Uncertain if the hole pattern works for other models but taken from the Behringer Model D. Made to replace the side cover and use the original…
I needed replacement for original knobs/sliders because they are sticky from uv light so after couple years they useless. designed in fusion360. sliders are tight fit! Sequener pattern knob is difrent so i designed also this variant.
This is a 3D-printable stand for the Tempera synthesizer . It consists of two parts which attach to the VESA mounting holes on the bottom side and can be customized in OpenSCAD . BOM Components used for one part (two needed in total): 2×…
Mini Dexed Case Mounting holes are 2.5mm Pi4 $36.25…
3D gedrucktes Gehäuse für den Behringer 2600, ARP 2600 clone im Vintage design. Die obere Gehäuseabdeckung wird mit 4 Schrauben an den seitlichen Wänden verschraubt. Der Korg SQ-1 Sequenzer Gehäuseaufsatz wird mit 2 Schrauben auf der…
Note: just publishing the STL files (this is not my work). Full credits to the designers and creative minds behind this project. Feel free to join the Discord server and discuss/share your thoughts and builds. I found these on…
This is a single tiered desk stand for the Yamaha Reface line of synthesizers and keyboards. It props the keyboard up at a 15 degree angle. I've test fitted this with a Yamaha Reface DX, but don't have access to other Reface keyboards to…
The default height of 35mm is designed to fit directly above a Arturia Keystep (see pictures).
My table is a little higher as normal, so i invented a simple riser to have a better look on the Synth.
This is an easy-to-print Synthesizer Stand for “Make Noise,” “East Beast,” and “West Pest” type Synths. Will support Synths around 228.6MM X 139.7MM or 9 inches x 5.5 inches Places the Synth on a comfortable 5 degree slope No support…
The case for the Mutable Systems Ambika Synthesizer can be printed on a standard 3D printer with a minimum bed size of 25x21cm. Additional to the 3D printed parts only following items are required: 4 pcs. 3mm (Eurorack) square nuts with…
Teenage Engineering OP-Z synthesizer and sequencer is a small beast for musicians. As it's a quite valuable thing, I designed this very simple case for all of fans with 3D printer somewhere around. I recommend the top cover (lid) to be 3D…
A case for the Jasper case, a clone of the vintage WASP Synthesizer
This is an easy-to-print Synthesizer Stand for LYRA-8 Organismic Synthesizer Will support the LYRA-8 Organismic Synthesizer or Synthesizers around 266.7MM X 266.7MM or 10.5 inches x 10.5 inches Places the Synth on a comfortable 5 degree…
Pour remplacement. Fichiers F3D DWG SKP inclus For replacement. F3D DWG SKP files included Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 15 Filament: Octofiber PLA Yellow Category:…
A case design I have used for a couple of home made synthesizers I have build. The side panels and internal support brackets are 3D printed with laser cut bottom, top, front, and rear panels. It can be easily modified for width if you…
This is a patch cable / USB cable holder. I use it on a plywood deck where my synthesizers are crowding along with my science fiction models. A support enforcer is needed No gluing Easy to print Designed on Tinkercad. Enjoy!…
This is a dust / protective cover for the Tempera synthesizer. This is designed to slide easily onto the Tempera without blocking the ports on back or touching the knobs, sitting on the outside edge of the case. Depending on how well your…
This design is based on the original Zynthian case designed by @LeifA and you need to use his front, sides and bottom parts. My design contains only the top and back plates. https://www.thingiverse.com/thing:4344990 I've got the original…
This is a case I designed for a clone of the legendary EDP WASP synthesizer using a Prusa i3MK3. Sorry guys, but I won't be publishing the .STL files as I am hoping to build these occasionally and sell them on Ebay. Just wanted to show…
In this project we'll show you how we built a mini synthesizer with capacitive touch using Circuit Playground Express and MakeCode. Click for links and resources! Learn guide, files and more!…
This stand was designed for the Waldorf Streichfett, Rocket and 2-pole synthesizer, holding them in a 45° angle. It can be printed easily without support. I can be printed easily laying on the side without any support.
This is an IKEA SKADIS / SKÅDIS holder for Sonicware synthesizers and can be used for the following synthesizers: Sonicware LIVEN Ambient Ø (Zero) Sonicware LIVEN Mega Synthesis Sonicware LIVEN Texture Lab Sonicware LIVEN Bass & Beats…
Introducing the Granular Synthesizer with Theremin Capabilities. A granular synthesizer is a type of digital synthesizer that produces complex, textured sounds by dividing sound waves into tiny "grains" and manipulating them individually.…
The pico_test_synth pcb was originally designed to be held up by four M2.5 standoffs and screws, but I wanted a simple little case that was easy to snap on and off. This case has two tabs that will hold the qtpy_synth PCB well enough but…
This model includes two custom parts that allow you to add an integrated battery (and charger) to this funky little synth! Charges via the synth's on-board USB-C port. The battery tray replaces the original bottom panel. Parts list: 3.7v…
This is a 3D enclosure for XIAO MIDI Synthesizer. The XIAO MIDI Synthesizer is an open-source innovative device that transforms MIDI signals into beautiful music. Powered by XIAO ESP32-C3 and the SAM2695 MIDI chip, this compact gadget…
Public domain model of an OP-Z Synthesizer by kasadar . Originally uploaded to Blend Swap .
The qtpy_synth pcb was originally designed to be held up by four M2.5 standoffs and screws, but I wanted a simple little case that was easy to snap on and off. This case has two tabs that will hold the qtpy_synth PCB well enough but allow…
This Summer, our intern Evan decided to create a Raspberry Pi MIDI Controller and Synthesizer. He created this case to imitate the look of a piano. Full details on this project can be found at Maker.io or at the link below. AGM Summer…
This model requires an LED strip for installation. It enhances the aesthetics and visibility of your synthesizer, making it perfect for low-light environments.
FIRST READ THIS! This is a lifter to stack anything you want, see photos… I made this for my dad who is a DJ so it is actually made for synths and other DJ stuf, but you can use it far other things to… P.s. you should look at the 3d…
Simple shell for the 4 synths by Spherical Sound Society that all share the same PCB footprint. Allows a little more protection to the soldering along with some peace of mind during sonic exploration. Printed with PLA
When I first saw the Solarpunk Synthesizer kit , it was clear that I just had to have one ;-) I created an enclosure which, ahem, encloses all parts for storing, and can also act as stand for the solar panel. The lid contains spacers so…
Case for Division 6 - Business Card Synthesizer made from two pieces that hold together without screws. Bottom piece functions as a base into which you slide the top part of this case. You don't need any screews but i is possible that…
Kleiner Gurthalter für den Yamaha Synthesizer CS 01. Davon werden je Instrument 2x gebraucht. Eines links, das anderes rechts angeschraubt. Mit PLA+ oder PETG oder ABS ausgedruckt, hält es fest wie das original (das aus Metall ist). -Man…
This is a case for my Arduino Synthesizer project that accommodates for a 128x64 OLED, 8Ω speaker, IR receiver, and ports found on the Arduino Mega 2560. It is it also fit for that same microcontroller.
SynthPad 1986 is a standalone touchscreen synthesizer built around the Arduino UNO Q. This is its enclosure: a portable case that holds the board, a 7" touchscreen at a 45° viewing angle, two potentiometers, a USB speaker and a USB-C hub,…
