Wyniki wyszukiwania: tce

Sortowanie

70 modeli

P
PrintablesSander

Softcell - no vertex space filling form

https://www.smithsonianmag.com/smart-news/mathematicians-discover-a-new-class-of-shape-the-soft-cell-180985124/ Model has some fillets applied, otherwise the edges are too sharp to print.

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesHunt05

Boatception

I merged two of these boaties together to create the ultimate test. You will need to print it on it's side (like shown in the last picture and in the print file) with snug supports along the outer brim of the two upper legs in order to…

Pobrania
11
Polubienia
2
Ocena
0
P
Printablessadska

odkapávač na štětce

Studenti si zkusí navrhnout model odkapávače barev ze štětce a tuše, držák na tuš pro potřeby výtvarné výchovy.

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesLogan B

Printception Business Card Holder

This business card holder was inspired by the Printception collection designed by MakeAnything and I used his tutorials for designing my version. It was also inspired by the Coaster - Printing in Progress designed by SNASA This model was…

Pobrania
814
Polubienia
272
Ocena
4,93

Printception Pen holder

I designed this awesome easy to print pen holder! As you can see, the form is made out of 2 hexagons which are twisted, it's a printception so you have those big layer lines and at the end a customizable end with a nozzle on it so it…

Pobrania
298
Polubienia
106
Ocena
5
P
Printablesvoite

Brush holder with space for dripping color / Držák na štětce s prostorem pro odkapávání barvy

Holder for three brushes with space for dripping color. The entire drip space is lined with a raised trim that prevents further drainage in unwanted places. The holders themselves are equipped with a sloping surface for the least possible…

Pobrania
167
Polubienia
14
Ocena
5
P
PrintablesBohusK

Stojan na štetce ( Brush stand)

Stojan na štetce s možnosťou odkladania štetca počas práce. Tryska : 0.4 Výška vrstvy : 0.20 Výplň : 20% Niektoré objekty vyžadujú podpery. Materiál : PLA Brush stand with the possibility of storing the brush during work. Nozzle: 0.4…

Pobrania
129
Polubienia
16
Ocena
5
P
PrintablesDaTTcz

HEXA stojan na štětce (HEXA brush cup)-OpenSCAD parametrizable

Upgrade: v1.1 - verze bez knihovny BOSL2 v1.0 - Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html

Pobrania
126
Polubienia
10
Ocena
5
P
PrintablesAdmin

Printception Square Container

I was inspired by the layer lines of 3D prints, to print prints that look like bigger prints! P r i n t c e p t i o n ! This is the Square Container from my Printception Collection . The model is designed to be entirely printable without…

Pobrania
114
Polubienia
30
Ocena
5
P
PrintablesSenki_86

Držák / odkapávač na štětce

Držák / odkapávač na štětce Drying rack / holder for brushes

Pobrania
113
Polubienia
37
Ocena
0
P
PrintablesBohusK

Skladací stojan na štetce (Folding brush stand).

Stojan na odkladanie štetcov počas práce. Tryska : 0.4 Výška vrstvy : 0.20 Výplň : 20% ( Pin.stl - 100%) Niektoré objekty vyžadujú podpery. Materiál : PLA Bočné steny sú prepojené dvoma ramenami ( každé z nich je tvorené spojením…

Pobrania
102
Polubienia
23
Ocena
0
P
PrintablesSarec

Brush holder / stojan na štětce

Robustní stojan na štětce - na 278 kusů. - 118 malých štětců - 132 středních štětců - 28 velkých štětců Robust brush stand - holds 278 brushes. - 118 small brushes - 132 medium brushes - 28 large brushes

Pobrania
96
Polubienia
28
Ocena
0
P
PrintablesTELDON Computer

Vase Printception - giant extruder nozzle

Just print it like shown in the picture. No gluing required! Currently standing on my table Have fun with it! NOTE: To get the best results I recommend using the smallest layerhight possible! If you want to go fast just make sure to bump…

Pobrania
91
Polubienia
23
Ocena
4,75
P
PrintablesDlarsen

Printception Container with BambuLabs Hotend Remix

I saw this thing, and I liked this thing, but I wanted a different thing! So I made a new thing using two things that I liked! :) Included are the links to the two original different models I combined here. They are free models but you…

Pobrania
80
Polubienia
42
Ocena
4
P
PrintablesZicchan

RocketCell

🚀 RocketCell – Modular Rocket Battery Holder 🚀 A rocket-shaped organizer for your batteries! Description No support, glue, or AMS required. All parts use snap-fit joints for easy assembly. Stores 14 AA, 14 AAA, and 16 button cells (7…

Pobrania
72
Polubienia
42
Ocena
0
P
Printables3d_prototypy

Brush Stand | Stojánek na štětce

This brush holder is a practical and functional accessory for any artist. It is designed for easy 3D printing without support structures, saving both time and material. After printing, the assembly is straightforward: simply push the…

Pobrania
67
Polubienia
9
Ocena
0
P
PrintablesOperationRemie

Printception Business Card Holder REMIX

I loved the original version but felt that it needed more space for business cards.

Pobrania
63
Polubienia
22
Ocena
0
P
PrintablesGizmo Gurus

DriftCell - Stackable Containers in Many Sizes

Overview DriftCell is a modular, support-free container system designed for everyday storage in the workshop, craft room, kitchen, or gear bag. Each jar features a sculpted side profile with DecoEdge-inspired lines, a twist-to-lock…

Pobrania
57
Polubienia
10
Ocena
0
P
PrintablesPeter Farell

Saltcellar

Benin Saltcellar. Saltcellars from the Kingdom of Benin, particularly those produced under the authority of the Oba (king), are exquisite examples of Afro-Portuguese ivory carvings from the 16th century. These objects represent a…

Pobrania
56
Polubienia
24
Ocena
0
P
PrintablesPeter Farell

Carved Ivory SaltCellar

Carved Ivory SaltCellar with lid.

Pobrania
56
Polubienia
24
Ocena
0
P

LightCenter_Square with a bit more light strip

Just added som more rails to put lightstrips in. Check out one of the pictures to see how to place the strip. This way you are able to power the stip from both sides.

Pobrania
56
Polubienia
9
Ocena
5
P
PrintablesJammerX19

Talentcell battery holder for telescope

My Celestron 9.25" Schmidt-Cassegrain telecope is great but the long wire to go to my portable battery kept getting wrapped around the fork after a night's operation. This box was designed specifically for a TalentCell Rechargeable 11Ah…

Pobrania
54
Polubienia
1
Ocena
0
P
PrintablesNexl

Propagandhi - HTCE logo 🎸

Another punk stuff. For fans of this rad canadian punk rock band and their rly cool album How To Clean Everything.

Pobrania
45
Polubienia
1
Ocena
0
P
Printablesmastersofwick

screw cap for Matcee (matcc) Snow Foam-Lance

As the original Part was broken, i made an upgrade. the Orginal Snow-Foam-Lance is linked below: https://www.amazon.de/gp/product/B09KGGTTWG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 printed with the mk4 with prusament petg jet…

Pobrania
41
Polubienia
1
Ocena
0
P
PrintablesCorné de Boer

Cristal lettice simple cubic unitcell

Made in tinkercad codeblocks,in a unitcel you can i.e. calculate the percentage of space an atom occupies in a crystal.

Pobrania
39
Polubienia
2
Ocena
0

TalentCell PB240B1 1.75" tripod leg mounting bracket

Bracket for mounting a TalentCell PB240B1 to a Skywatcher EQM-35 equatorial mount tripod. Should work for any tripod with 1.75" legs. Great for powering your astronomy rig for long periods. Mount works equally well inside or outside the…

Pobrania
38
Polubienia
7
Ocena
0
P
PrintablesSnortimer

EEW Nano Battery Base for TalentCell 12V/6000mAh USB Battery

This is a battery case to mount a TalentCell 12V/6000mAh USB battery (affiliate link:…

Pobrania
37
Polubienia
5
Ocena
0
P
Printablesshipleaves

Talentcell Battery Holder

A holder for a TalentCell Rechargeable 12V 6000mAh/5V 12000mAh DC Output Lithium ion Battery Pack Model YB1206000-USB It has loops for a velcro strap to attach it to whatever you're powering. They're at the perfect height for a Sky…

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesDaniel Bacon

TalentCell 12v Bmount

This will fit Talentcell Battery 3000mah with or without USB. original use proton pack build. You can ad a zip tie on the open end for more secure mount. Category: Costume

Pobrania
34
Polubienia
1
Ocena
0
P
Printablescimbr / 3BRM

Vase Printception

Tried to design my own Printception Vase/Container and here is my Result! Just print it like shown in the picture. No gluing required! Currently standing next to my Printer to collect the waste (brims ect..) Have fun with it! NOTE: To get…

Pobrania
33
Polubienia
11
Ocena
0
P
PrintablesJzuz

Plantcell combined in one modell

Remixed to print in one piece in one color so i can paint it Category: Sculptures

Pobrania
32
Polubienia
0
Ocena
0
P
PrintablesJammerX19

Talentcell battery holder for telescope V2

This is version 2 of my Talentcell battery holder. Version 1 was a bucket using a Velcro strap. Over time the strap failed so I went with this version. Use industrial strength Velcro on the back of this bracket to hold it to your scope.

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesVazek_CZE

Circular brush or pencil holder (stojan na tužky/štětce)

no nuts or screws needed, it looks weak but holds its weight properly netřeba šroubů ani matic, vypadá křehce ale svoji váhu udrží Všechny hřídelky pasují pouze při dané jedné pozici

Pobrania
31
Polubienia
4
Ocena
0
P
PrintablesDMyers

Spark Amp TalentCell Battery Holder

Battery holder for the Spark Amp using the NB7101 TalentCell Battery purchased on Amazon. It uses exist screws on the back so it does not require new holes or void the warranty if you need to remove it for warranty care. It also fits in…

Pobrania
29
Polubienia
3
Ocena
0
P
Printablesatvfool

Spike for Bytcew Pickup Telescopic Pole

A spike to shove in the ground for this pole(affiliate link) . It should slip over the base once the handle is removed. See also the guying ring I made to fit this pole.

Pobrania
26
Polubienia
2
Ocena
0
P
Printablesatvfool

Guy Rings for Bytcew Pickup Telescopic Pole

A guying ring for this pole(affiliate link) . It should slip over the 5th or 6th section from the bottom snugly. The outer holes were designed for regular 550 paracord. See also a spike made for this pole to help keep it in place.

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesPawel

heartception

Just nice looking heart in a heart in a heart in a heart.

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesBlaZeD

Talentcell PB120B1 Clamp On Bracket for Skywatcher AZ-GTI

I combined a file for a 30mm clamp onto a top and bottom holder for the talentcell PB120B1 to fit the Shywatcher AZ-GTI tripod legs. It is quick install and quick release for easy movement. Print Settings Printer Brand: Sovol Printer:…

Pobrania
19
Polubienia
1
Ocena
0
P
Printableszz2012

Pinstripe brush box/box na linkovací štětce.

Box for pinstripe brushes. The bristles (squirrel hair) lie on the bottom of the box and do not bend. The brushes are separated from each other, protected from damage and dust. Rounded edges make cleaning easier. There are two lower parts…

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesBogomips

Christmas tree ornamentception

I made this Christmas tree ornament to enter the 2023 Holiday Decorations contest. Everything is made with FreeCAD and the Lithophane workbench. The source material is from www.aiimagegenerator.org.

Pobrania
16
Polubienia
1
Ocena
0
P
Printablespetz

Malý stojan na tužky nebo štětce

Žáci pomocí modelování v Tinkercadu vytvoří jednoduchý stojan na tužky nebo štětce, stojan se dá případně i využít jako stojan pro zkumavky.

Pobrania
14
Polubienia
11
Ocena
0
P
Printablesmatěj m

Desk Organizer – Pen & Pencil Holder (3D tištěný stojánek na tužky a štětce)

Green 3D-Printed Pencil and Paintbrush Holder A practical holder made using 3D printing with green PLA filament. It is designed to neatly store pencils, colored pencils, pens, and paintbrushes. The holder has the shape of an open box with…

Pobrania
13
Polubienia
4
Ocena
0
P
PrintablesMichael Fienen

Talentcell YB1206000-USB Battery Power Board Mounting Bracket

This bracket is designed to hold the power board of a Talentcell 6000mAh (https://www.amazon.com/gp/product/B00ME3ZH7C?ie=UTF8&psc=1&linkCode=sl1&tag=thpefi0f-20&linkId=04dc49866cc452a9f995268753a81344&language=en_US&ref_=as_li_ss_tl) on…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesP3D

Ball in cube / Koule v kostce

Ball in cube I made several holes through the ball. First print the ball, supports are needed. Then print the cube, pause at a height of 65mm and insert the ball. I fixed it with tape so that it does not move during the next print. I used…

Pobrania
12
Polubienia
2
Ocena
0
P
Printablesmwerezak

Holder for a TalentCell Portable 12V Li-Ion Battery Pack

This is a bracket meant to hold a TalentCell YB1206000-USB portable 12V battery pack. I created it because I needed a 12V battery to power the ground station I use for my drones. It has a butterfly clamp that fits the my tripod, but it…

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesGizmo Gurus

DriftCell – Heart Edition (EDC Carry Pod Remix)

Overview DriftCell – Heart Edition (EDC Carry Pod Remix) A pocket-sized carry pod for the little things that matter. This remix reimagines the original DriftCell storage system as a low-profile EDC carry tool. Instead of sitting on a desk…

Pobrania
10
Polubienia
4
Ocena
0
P
PrintablesFilament 7D

Stojan na malířské štětce s miskou

Maluj, kresli a natírej - třeba i tu věž

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesLegox

Battery holder for talentcell pack

Made to hold a talentcell battery to power my goto mount. Used a random generic phone clamp and a bungie cord as a secondary support just incase. Talentcell battery: ( Talentcell 12V LiFePO4 Battery Pack LF4106 )

Pobrania
9
Polubienia
0
Ocena
0
P

Talentcell 12v 6ah Battery mounting case

This case will hold the Talentcell 12v 6ah battery so you can mount it to a case. I made two portions that stick out further and thats what i glued with JB Weld. You can use whatever adhesive you want, JB Weld is just what I had on hand.…

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesbrick man
Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesCostal Radio

TalentCell 3000mAh Switch Cover

Protective cover to prevent the switch on your TalentCell 3000mAh from getting flipped in your bag. PETG recommended.

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesGizmo Gurus

DriftCell – Easter Edition (EDC Carry Pod Remix) *No MMU/AMS Needed

Overview DriftCell – Easter Edition (EDC Carry Pod Remix) A pocket-sized carry pod for the little things that matter. This remix reimagines the original DriftCell storage system as a low-profile EDC carry tool. Instead of sitting on a…

Pobrania
8
Polubienia
0
Ocena
0
P
Printablesnimus

Bosch Tire Changer TCE 4430 protection cover

Bosch Tire Changer TCE 4430 protection cover to replace original one.

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesY5HI5LOW5

glitcer

it completely glitches out it has a tiny hole going through it idk if its possible to print

Pobrania
5
Polubienia
6
Ocena
0
P
PrintableswilliamCromar

Trichloroethylene (TCE): from the Toxic Poetry series

This is trichloroethylene , fifth in the series Toxic Poetry — a set of sculptures based on molecules that are as beautiful as they are carcinogenic. These sculptures are based on ball-and-stick molecular models. These were modeled by me…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesZUŠkaST

MULTIFUNKČNÍ DRŽÁK NA ŠTĚTCE

Žáci kresebně navrhnou tvar držáku na štětce s odkapávací či rozmývací plochou. V aplikaci Tinkercad držák “vymodelují”. Exportují do stl. Připraví model k tisku v PrusaSliceru. 3D tisk

Pobrania
5
Polubienia
2
Ocena
0
P
PrintablesZSStefanikova

Paleta na akvarelové barvy (s držákem na štětce a nádobkou na vodu)

Žáci si podle vzoru, který vytvořil vyučující, sami vymodelují a naměří paletku v modelovacím softwaru Tinkercad. Paletu následně budou využívat při výtvarné výchově při míchání akvarelových barev.

Pobrania
5
Polubienia
3
Ocena
0

hora na kostce s člověkem

krychle na které jsou válce na rohách a uprostřed je vajíčko na kterém je hora před tou horou stoji na srdíčku člověk na skejtu

Pobrania
4
Polubienia
0
Ocena
0

SlotCell Mount Battery Holder for Slot Machine PCBs

Nederlands/English Onder/Below! Bekijk ook mijn YouTube-kanaal en steun mij door je te abonneren en misschien wel te kijken! Also check out my youtube channel and support me by subscribing and possibly watching!…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesElisek.1

Odkladač na štetce

Jedná se o odkládací plochu na malé štětce během malování.

Pobrania
4
Polubienia
2
Ocena
0
P
PrintablesThe Khaki Hat

QMX + Talentcell frame

I printed this in PETG for flexibility of the tabs holding the Talentcell. First slide the QMX into the frame and bring it to the top. Then slide the Talentcell into the frame to hold the QMX up. You may have to be creative with the…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesHonza

Obal na štětce do školy

Obal na štětce do školy, aby byli všechny pohromadě, neohnuly se. Také nezašpinily tašku a jiné věci.

Pobrania
3
Polubienia
0
Ocena
0

Topper - ŻYCIE ZACZYNA SIĘ PO 40-tce GRZESIU!

Topper z napisem “ŻYCIE ZACZYNA SIĘ PO 40-tce GRZESIU!” Idealny do tortu

Pobrania
2
Polubienia
2
Ocena
0
P
PrintablesKI6CR - Chris

TalentCell battery button protector

Tension fit this on your TalentCell battery to prevent accidental activation of the power button while in your backpack. This was designed to work with the YB1203000-USB model, 3000mAh battery.

Pobrania
2
Polubienia
1
Ocena
0

Topper - ŻYCIE ZACZYNA SIĘ PO 60-tce DARKU!

Topper z napisem “ŻYCIE ZACZYNA SIĘ PO 60-tce DARKU!” Idealny do tortu

Pobrania
1
Polubienia
2
Ocena
0
P
PrintablesAmater001

Oprava - náhrada ručky štětce

je to dost natěsno, použil jsem zkrácené hřebíčky co jsem našel v dílně

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Pinstripe brush box/box na linkovací štětce.

Box for pinstripe brushes. The bristles (squirrel hair) lie on the bottom of the box and do not bend. The brushes are separated from each other, protected from damage and dust. Rounded edges make cleaning easier. There are two lower parts…

P
Printables

Odkladač na štetce

Jedná se o odkládací plochu na malé štětce během malování.

P
Printables

DriftCell – Heart Edition (EDC Carry Pod Remix)

Overview DriftCell – Heart Edition (EDC Carry Pod Remix) A pocket-sized carry pod for the little things that matter. This remix reimagines the original DriftCell storage system as a low-profile EDC carry tool. Instead of sitting on a desk…

P
Printables

DriftCell – Easter Edition (EDC Carry Pod Remix) *No MMU/AMS Needed

Overview DriftCell – Easter Edition (EDC Carry Pod Remix) A pocket-sized carry pod for the little things that matter. This remix reimagines the original DriftCell storage system as a low-profile EDC carry tool. Instead of sitting on a…