Liczymy pasujące modele…
I wanted to print my own nuts & bolt for my camera and tripod. With Fusion 3D it is very easy to create them, but once you print you have to consider also tollerances. I tried few times and at the end I found that you have to reduce the…
If you own several cameras you don't want the hassle of mounting your plate any time you change cameras. Print as many as you need! This plate also works great with my phone frame. Use two M4 bolts to attach it. You will have a phone with…
All the cam locks on my old Manfrotto 055PROB tripod broke. As the original spare part (R190,387) is absurdly expensive (needed six), I drew my own. Modified the original shape for easier printing and better durability. As the geometries…
This is a basic implementation of the 200PL tripod quick release plate used by a wide range of Manfrotto tripods, complete with FreeCAD source, for adaptation projects. There are lots of 200PL plate STLs out there, why another? Mostly…
Easy-to-use iPad mount for standard camera tripods. iPad fits securely with or without a case in the mount, adjustable continuously with screw fixation options. Pivotable in one axis. Caution is advised as, under extreme lateral tilt and…
Model Info | Introduction I want to introduce you to an easy-to-print Spigot Adapter for Tripods - typically used as Lamp Mount and available as follows: The standard threads from a normal tripod were used: I made several improvements and…
I didn't like the holder for the Synscan that came with my EQM-35, so I designed my own by taking inspiration from the motor controller holder (that also came with the mount). It's made for Skywatcher's steel tripod that comes with EQM-35…
Universal smartphone adapter applicable to tripods with screw head. No supports are required. An M6 screw and bolt are required to fix the position. The screw does not press on the smartphone but on the inner wall of the adapter. The…
Just a quick hack to mount my Handy(Smartphone). But may be it's also handy for you. ;) I added all details so you can tweak gaps if needed. Ballhead_v1-0_FlashHat.STL, HolderTop.stl and Screw.stl are not modified. For the sake of…
This holder clamps on Skywatcher's steel tripod legs and offers a place to store the battery during use. It's made for Skywatcher's steel tripod that comes with EQM-35 mounts and above. Those USB-C PD power tanks can provide up to 12V at…
Cable Clip/Holder for round surfaces like tripods, 35mm diameter I use it on my TV Tripod mount
After trying to buy a replacement spreader/center tray from Celestron and failing, I modeled a replacement and printed one to see how it worked. Perhaps I went overboard on everything (8 walls, 8 top/bottom shells, 60% gyroid infill,…
The M4 Screw And M4 Nut With Wings from https://www.thingiverse.com/thing:2142345 did not work for me, so I made my own. I added all details so you can tweak gaps if needed. Customized version of http://www.thingiverse.com/thing:193647…
This eyepiece tray extender locks onto a 2" slot of the original tray and extends it with 6pcs. 1,25" slots. It locks into the original tray with a threaded nut. The uploaded model doesn't have text and it fits the Prusa Mini. Depending…
I have a Smallrig for my camera but I wanted another for my phone as it is more accessible than a camera. However, the original designer did not point out any compatible 3D-printed phone holder/ grip with the cage. This led me to three…
I had some small things that I was trying to put a polyurethane coat on and the poly kept dripping straight from the project and onto the sheet of cardboard I was painting on, making my project stick to the cardboad. I needed a solution…
Mount for Evo 4 audio interface using gopro compatible attachement Tight fit, hence top bracket is not really necessary. Only if you plug and unplug the guitar or headphone jack at the bottom with one hand very frequently. Use 2 M3x20…
Tired of working with cheap tripods or selfie-sticks that are not stable and keep falling over but don't want to buy an expensive one? → Try using these 3d printed feet. It's a quick, easy and cheap solution :) Product infos Product…
I wanted to use a camera tripod to mount an external antenna for Field Day use, but the 1/4-20 threads on tripods are too short to attach a standard nut. By using a 1/4-20 Coupling Nut I was able to 3D print these mounts, and the design…
Where I live Eyebolts with a 3/8" Inch thread are either hard to get by or really expensive. So I made this to screw it to my Tripod and hang my Backpack from it to stabilize my tripod during Long exposures.
I needed a small 7cm extender for a compact tripod i had, it was just that little smaller so i made this very basic one. Its niche but i hope someone might find it usefull. I printed it in normal pla Used https://bumpmesh.com to add the…
The tripod that came with my Moose Lite scanner left a lot to be desired in that it was not very stable. This model replaces the foldable legs with a solid conical base that alone is more stable than the legs, but also is hollow on the…
From the 2025 April Fools XTRO. The stats on these things are sweet. They look like something I would actually run with CSF. Category: Toy & Game Accessories
Summary Placed the slotted base on top of a rack and then place the tripods into the base, as shown in the picture above. The base will prevent tripods from falling over. The slots on the back of the base are 3 cm apart and 2.8 mm thick.…
See my blog post for the complete set of info about this project. Code setup, photos and interactive 3D models as well. RasRig came to life when I needed an efficient way to set up multiple cameras for my workspace, and I realized the key…
(Not tested on the device yet) Operate the Hercules DJcontrol Mix while standing, lying down or sitting - no matter when, no matter where. Let this little boomerang, made specifically for the Hercules DJcontrol mixer, be your partner in…
I made a replacement for the lost screw that came with my brother's Vortex binocular. Te screw is like a button, it purpose is to protect the thread of the tripod mount.
Last version worked great, but the pla threads didn't hold very well and i ended up needing it a little taller than 70mm so i made a few adjustments, changed the texture using https://bumpmesh.com again and re-printed it using pc this…
From the 2025 April Fools XTRO. The stats on these things are sweet. They look like something I would actually run with CSF. Category: Toy & Game Accessories
From the 2025 April Fools XTRO. The stats on these things are sweet. They look like something I would actually run with CSF. Category: Toy & Game Accessories
Tripod Mobile Phone Clamp V2 with Added 42,5 mm base used with some Tripods. Thank you Stamos, the Original Creator.
Easy-to-use iPad mount for standard camera tripods. iPad fits securely with or without a case in the mount, adjustable continuously with screw fixation options. Pivotable in one axis. Caution is advised as, under extreme lateral tilt and…
Printed with: 3 x Walls 3 x Top + Bottom 50 % Infill (double layer height) Infill pattern - Cubic Subdivision Seems to be strong enought to hold the weight. However, I accept no liability for damage caused by falling telescopes.
I needed a cable clip for a tripod tube with a diameter of 28mm and for the cable from 4 to 5mm. I also created other sizes with 27mm and 24mm. It is recommended to print it in PETG so that it does not break when clipped onto the tube.…
alteration of these models, altered for use in my thesis on Arduino sensors system https://www.thingiverse.com/thing:4742969 https://www.thingiverse.com/thing:4763840
Print without any support on its 45° side (view pic) Glue Apple MagSafe inside (yeah i sacrifice one by cutting the cable) Enjoy
Just missed such thing, so I designed one. Needs a UNC 1/4" bolt with 10mm thread length, remove some threads at for best fit or get a special tripod one (quick release screw) from the interwebs. Print in this orientation! There is a…
From the 2025 April Fools XTRO. The stats on these things are sweet. They look like something I would actually run with CSF. Category: Toy & Game Accessories
Tripod Mobile Phone Clamp V2 with Added 42,5 mm base used with some Tripods. Thank you Stamos, the Original Creator.
This mount makes it possible to attach a guide cam or a planetary camera to a tripod The problem is, there is no screw in those cameras. This mount / adapter is the solution. Good fit Tested with Touptek 678M and ZWO 120MM mini Tested…
These are 2 separate models of clip-on wire clip and utility box. They are parametrically designed in Fusion 360 to adopt flexible pipe, wire, and box dimensions. I designed them to use on my studio C-stands and tripods. To get your own…
Easy-to-print snap-in cable clips for a quick and easy way to keep your camera cables safely secured while you work. These cable clips are designed to fit Manfrotto tripods but can be used with other brands as well. The clips include two…
Printed with: 3 x Walls 3 x Top + Bottom 50 % Infill (double layer height) Infill pattern - Cubic Subdivision Seems to be strong enought to hold the weight. However, I accept no liability for damage caused by falling telescopes.
A printable tenting puck, which is very similar to the one offered by SplitKB , featuring a ¼" UNC tripod thread and four bolt holes for M2 screws in the 38.1mm pattern. The outside diameter is 42.6mm - please check if this fits if you…
Mount your phone to anything you can make a hole in. Has grooves for a rubber band, to improve friction, but works best with phones in cases. should be fine for phones 65 - 92mm wide Uses M5 screws with 8mm hex heads. There is a space for…
![Spigot Adapter for Tripods - Lamp Mount [optimized, very stable]](https://media.printables.com/media/prints/914396/images/6985523_4ca1cba2-a9e8-4ba1-ad80-1b1e99e8a7c2_7703b03e-9b61-4a54-8809-08f529a5feed/a.png)
