Liczymy pasujące modele…
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
tool holder for Elegoo Neptune 4/4 PRO
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
You don't need any supports or edges. All you have to do is glue the head and fin and the outer parts together. Filling: 15% Expansion: 2 If you want to support me, join my Patreon https://www.patreon.com/Flexi__Maker or my printables…
Wydruk około 3,60 €–4,40 € nettoWstępna wycena jednego wariantu
Designed a tunnel for my hotwheels fanatic. It's a 4-lane tunnel for four cars or 2 (1:64 scale) monster trucks. The standard hotwheels connector fits on both sides. The top has a row of holes, for a hotwheels emblem. The emblem also…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Utilizing a retractable badge holder to keep the cable up and away from the print area.
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Simson Tuning Lüfterrad für alle Modelle mit einem zwangsgekühlten Motor. Mit einer neuen VAPE Zündanlage. Wichtig! Das Modell passt nur auf das Polrad der VAPE Zündung, nicht auf die Originale Unterbrecher Schwungscheibe! Die Druckdatei…
Wydruk około 5,36 €–6,56 € nettoWstępna wycena jednego wariantu
A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.
Wydruk około 6,25 €–7,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought a used Rescue Helicopter, but there was the Pin missing to hold the Rotor Blades. So i made a replacement. Print the Part sideways, so that the print get the Maximum Material stability, and doesnt brake.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are some chucks to hold the inner and outer portion of a standard pinewood derby wheel for tuning purposes. They fit standard drill chucks, remember to use low speeds when polishing. The derby wheels I used have the following…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. This is a remix of…
Wydruk około 4,00 €–4,88 € nettoWstępna wycena jednego wariantu
Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated You know you printer has 2 heated bed zones right? Let's make it work with OrcaSlicer automatically! Guide [ If you haven't created a…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
Das Set besteht aus Adapter für ein 120mm PC Lüfter Verbindungen: Innenmaß: 100mm, Außenmaß: 105mm, Länge: 70mm, 40mm, 20mm Zwischenstücke: Innenmaß: 96mm, Außenmaß: 100mm, Länge: 50mm, 30mm Aktivkohle Adapter Außenmaß: 100mm, Länge: 55mm…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Manual multimaterial project specially fine tuned for MK4 and MK4 only. Before finding the proper settings, I experienced bubbling, over extrusion and jammed filament. I am now having a clean wipe tower and nice multi-colour parts. You…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
It's sturdy. I have printed it at 1.6mm wall with 25% infill
Wydruk około 28,94 €–35,37 € nettoWstępna wycena jednego wariantu
***DO NOT SELL*** ASK ME ABOUT TERMS/CONDITIONS ABOUT SELLING I was making some MMU prints and it was always hard to find where the filament started from. So I whipped up something in Tinkercad and it took lots of trial and error to get…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Hier noch eine Zwangsbelüftung für die Elektronik des MK4 / MK4S als Zubehör für mein Druckergehäuse. Die Idee ist die nicht außerhalb platzierbare Elektronik, beim Drucken mit Zusatzheizung im Gehäuse, vor Überhitzung ui schützen. Ihr…
Wydruk około 3,06 €–3,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tunnel is made for train landscape in H0 scale. The tunnel is scrimped for ICE and typical 0 locomotives with large carriages. high:8,5 cm; lenght 17 cm; width: 7 cm CAD: Tinkercad Slicer: Prusa for MK 4 with MMU MMU extruder…
Wydruk około 13,66 €–16,69 € nettoWstępna wycena jednego wariantu
I build this gantry to check the righ Extruder Rotation in your printer
Wydruk około 2,18 €–2,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die modellierten Bauteile dienen als Ersatz der Spiegeldichtungen, wenn man Spiegel an den Lenkrädern Montiert hat und die Standartmäsigen Spiegel abmontiert. Der Ersatz wurde an einer Yamaha YZF-R 125 Baujahr 2023 montiert und sieht sehr…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Die Ventilkappen Beschriftung dient beim Reifenwechsel der Kennzeichnung
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
ESUN - Tough PLA Grey 0.2 mm - height 4 walls 15 % gyroid infill Support on build plate for thread (isn't the most optimal but fits and holds) Rest of the settings in the png files Snaps into the rail, can't say how normal PLA will hold…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Please like and download my model. Visit my page to get more 3d model. Thank all, Have a good day. If you don't have the original tool tray for the Elegoo Neptune, this will be the model you need. It can fit the Neptune 2, 3, and 4…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gitter für Entlüftungsrohr der Abwasserleitung. aussendruchmesser 74mm
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
Abdichtung für Filamenttrockner Für die Verwendung mit unserer MMU haben wir uns einen Filamenttrockner und Trockenbox von Sovol gekauft, den ich für die direkte Verwendung ein klein wenig modifiziert habe. Ich habe die…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a junction box to hold a small 5V PSU-Board as well as a Relais-PCB within an REV-Ritter cable duct. Here is an qick model for that. It can be fixated wihin the duct with the two T-Screws. I left some space on the bottom of the…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Dies ist eine einfache Ablage für unsere Bedienungsanleitungen einiger Küchengeräte. So bleiben die Anleitungen übersichtlich. Die Abmessungen sind 200 mm lang x 150 mm hoch x 40 mm innen (46 mm außen). Auf der Unterseite befinden sich 4…
Wydruk około 8,13 €–9,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Unser Maskottchen begleitet uns auf unseren Radtouren. Auch ihm darf die persönliche Schutzausrüstung nicht fehlen. Das Brillenglas ist aus transparenten Filament und wird in das Gestell geklebt. Die Ohrenhalter sind am Brillengestell…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rock
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
For elegoo Neptune 3 plus
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Hey, wall hoes with lettering field were urgently needed in our company because otherwise we are looking for the keys. printed with a 0.4mm nozzle on 0.20 structural with organic supports Have fun Hey, Wandhacken mit Beschriftungsfeld war…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
Dieser 3D-gedruckte Halter dient dazu, Beschriftungen aus diversen Materialien bis 0,8mm (48×48 mm) direkt einzuschieben undan den Holzpfosten eines IKEA IVAR-Regalsystems zu schrauben. Er eignet sich besonders gut, um mehrere Regale…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
👇 Click the image below to explore my other 3D printable models. ✨ I prefer print with PETG filament. Z mount connection Z mount slepení Glue the two parts of the Z mount. The top edge must be lined up. Alternatively, you can sand it. To…
Build plate corner guides for the Elegoo Neptune 4 and 4 Pro printers. It accounts for the margins needed to give clearance to the underside of the heatbed You can stick it with double sided type, I used VHB. Printed in PETG for more…
Burry the tunnel under your aquarium soil or gravel and let your fish explore it. All the edges are rounded to protect you fishes' fins. With dimensions of 140mm x 140mm and a 37mm roof height, (50mm overall height, including the…
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
Made this to be able to put the bed back in place more easy and add a cable chain on my neptune 4 plus Thanks to: scrogathon & Matt Queen & Sascha and Berry C & Daan87423 They Helped me a lot for making the mount possible on the neptune 4…
How to setup the profile: Go to File → Import → Import Config Bundle and select the .ini file. Download this program and go to Print Settings → Output options and replace “thumbnail-path-here” with the path of the program you downloaded…
Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…
After setting up my Neptune 4 Plus I thought it was a pretty big shame that there was no cable management. It just looks sloppy. Looking at marketing material there is nothing done to spruce up the look. Always thought this chain has a…
Update 05.05.2023: I added a solid version of the design so you can basically choose your wall thickness by setting the perimeters as desired or print solid resp. with sufficient infill if you don't trust your filament ;D…
Start G-Code (Version-Date 29. May 2024): G90 ; absolut coordinates M83 ; extruder relative mode M104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling M140 S[bed_temperature_initial_layer_single] ;…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
This is an optimized version of the "Mechanical Planetarium" model by Zippitybamba. His original model is on Thingiverse here: https://www.thingiverse.com/thing:4613061 I printed a few parts of the original model on my Prusa I3 MK3S, and…
A simple and strong clip on webcam mount for your Elegoo Neptune printer. Supported Printers (please compare the below image for other printers) Elegoo Neptune 3 Pro Elegoo Neptune 4 Elegoo Neptune 4 Pro The printer needs to look like…
Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…
V6 Prototype Update: As I'm currently not really motivated to further redesign the fan shroud, I thought to add the last prototype I made. I think I'll finish it in the future, but not right now. So maybe one of you can play around with…
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
Update 29.02.24: Grüße geht raus an alle heutigen Geburtstagskinder =)! Danke an @Hanno_1419514 für den Denkanstoß zu der guten Verbesserung die Ventilblöcke einfach unten offen und komplett ohne Infill zu drucken! → (Prusa Slicer) Die…
Designed for the big bed of 4 Plus 320x320 with 9 connected areas. With 1 or 3 layers at 0,2 layer height
I went to iterate on the Belt Tensioners. The ones available do work just fine but i wanted to have them look more integrated into the Neptune. x-Axis: There is a 4 Pro specific version included. y-Axis: There is a Plus & Max specific…
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
From the depths of meme brainrot, the legendary sahur drummer is finally printable! Tung Tung Tung Sahur brings chaos, tradition, and pure internet energy into one glorious, unhinged figure. Whether you know him from the streets or the…
I created these to reduce noise and get better print quality. Use tape/string/zip ties to make side walls for better stability. Put the smaller ones on the rear of the printer. Print using PET-G. These do seem to be working till some…
Also see my LED difusor remix for Neptune 3 (pro) / 4 (pro) https://www.printables.com/cs/model/665424-elegoo-neptune-3-pro-light-bar-slim-diffuser Z mount is made from 2 pieces GLUE them together around 36 chains will be needed around 42…
Prints great with 2.mm layer height and 3 perimeters
Minor Update - 14 Feb 2025: 3DBenchy model restored to the package now that it is in the public domain . Major Update - 21 Jan 2025: The Modular Wind Tunnel for STEM Education and its accessories are now FREE and published under a license…
Tung Tung Tung Tung Tung Tung Sahur with a stand, scale him as you want. Happy printing!
UPDATED 5-7-2023 7:10PM PDT: Updated to include the missing shorty version: Neptune 3 Pro Shorty Shroud -5015 Fan.stl UPDATED 5-7-2023 10:30AM PDT: Now supports ADXL345 accelerometers. Updated the two shrouds and two fronts to have mount…
What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…
The iconic brainrot meme character tung tung tung sahur
This is a guide for the Magnetic Printbed, so you don’t have the hassle of aligning the Printbed onto the Magnetic bed. Just put double sided tape on the two objekts and stick them in the back corners. Warning : Use heat resistant…
I was looking for a way to reduce vibrations on the Neptune 3 Plus and by looking at designs for other printers, I came up with this version. As I did not come up with this entirely myself, I have tagged this as a remix of another design…
Hi ! Fixing clip for the leveling wheel of the Elegoo Neptune 4 Pro 3D printer. It prevents the wheel from turning due to vibration. Over time, it also appears that the wheel is trying to turn even with the clamp. But this is a simple…
Designed these to make lining up the build plate easier on my Neptune 4 Max. Not sure if these will fit on different model Neptunes as I only have a 4 max. Both sides mount using stock screws. Parts are tight so some force is required to…
These bed screw locks help ensure the bed screws stay in position. Each notch translated to 2 minutes of movement, which is useful for dialing in the manual bed leveling with Klipper's Screw Tilt Adjust. Note Elegoo has developed an…
Redid the mount to make it way better to print. You need no supports just print it flat on it's back. The new file is the v3 I also raised it slightly so if you want to go full cable chain it will work now on the neptune plus and max :) .…
An improved version of the OEM cable clip on the x-axis of the elegoo neptune 4, 4 Plus, 4 Pro and 4 Max. It doesn't pinch the cable like the original one does and has an angle that prevents the cable from touching the z axis' lead screw.
/!\ Be careful when printing accessories for pets /!\ When selecting add-ons, ensure they are appropriate for your fish. This product is specifically designed for Betta fish and may not be suitable for smaller species.…
This is a better holder for the extruder cable for the Elegoo Neptune 3 pro/ plus/ max Alsow I made anti vibration feet for the printer…
An extra filament spool holder for Elegoo Neptune 4 Plus printer. You can use it for multicolor prints to hold the second spool. Print tips: infill: 30% no support needed
All details are in the PDF uploaded: Design, BOM, Printing, Some assembly details Files you will find here: Photos PDF “Lack enclosure documentation_Vx.pdf” All STLs Full assembly in STEP ------------------- Our intent was to be able to…
Elegoo Neptune 3 Max First Layer Calibration Test Just slice and print as aligned!
This is a tunnel for our crayfish tank for him to be able to hide underground. It has ridged steps so this should work for other critters or fish too. Dimensions: Bottom to top: 76.2mm Bottom to sand: 57.15mm Total width: 438.55mm Depth…
A collection of various sized tunnel portals in N, TT, HO, and O scale to be used as tunnel entrances. They feature a stone texture as well a prominent keystone that can be inscribed with your railroad's initials, logo, or tunnel number.…
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
HalfManBear's shroud design but with multiple optimizations delivered in one package Thanks to Layer.Shifted for pointing out the airflow problems! Special thanks to @mcbabo for making the assembly illustration! 🤩 Do you like the design?…
Fits all Neptune 4 variants. This fan-mod targets to provide better cooling then stock while sticking loosly to the stock design language while integrating 2x 5015 Fans and 1x4015 Fan. There is a PDF with assembly instructions. It also…
Heizkörper Entlüftungs-Schlüssel Da hier viele bei den Kommentaren angegeben haben das sie mit 110% gedruckt haben, hab ich nochmal nachgemessen. Die 4kt Vertiefung hat genau 5,0 x 5,0 mm Eine Neuauflage mit 110% (5,5 mm) findet Ihr hier:…
This model is a specially designed X Carriage Leveling Support for Elegoo Neptune 4 Pro 3D printers. It is crafted with the purpose of ensuring accurate leveling on the Z-axis. Mounted under the X-axis carriage, this support provides…
This is a better holder for the extruder cable for the Elegoo Neptune 4/ pro/ plus/ max
It's an accurate (with fillets and holes) 3D model of the Elegoo Neptune 3 Pro/Plus/Max and 4/4 Pro build plate to be used as a custom background in PrusaSlicer, SuperSlicer or Cura. I've added an embossed Elegoo-logo for a slightly…
Thanks to https://www.printables.com/@Toonerit for original model for 3 Max, this one update for 4 Max to hold auxiliary fan cable/
The rapid movements and vibrations of the printer have a tendency to loosen the belts on the Elegoo Neptune 4 Max. These stoppers will lock the tension knobs. For some reason, my CAD program flips the exported .step files on the y-axis.…
Anti-vibration feet for Elegoo Neptune 3 Pro. I used them to isolate the printer from the enclosure I built to reduce noise, they are quite effective. They fit onto the existing rubber feet of the printer. Printed with Devil Design Black…
General Information The included .3mf file can be opened with the latest PrusaSlicer release ( https://github.com/prusa3d/PrusaSlicer/releases ) and modified for your hardware configuration in order to create retraction tuning gcode that…
I do not use Cura and so I created a PrusaSlicer profile for the Elegoo Neptune 4 Pro (should also work with the non-Pro). This not perfect and there are still some things that need tweaking but it works well for me with the included PETG…
This is my first Remix ever so I hope that all will be right. :-) I remixed EDnation splendid design to fit my Neptune 3 Pro as the orginal was not big enough. I did it by extending the bottom corners by 60mm to fit the 3 Pro including…
update(mar 01, 2025): 4Pro has been made compatible by Woodworker - see remixes update(jan 24, 2025): 4pro is currently incompatible with the section ZMount<>Extruder cause it a very different mounting plate - just follow the recommended…
brainrot tung tung tung sahur
Diverses entrées de tunnels Ferroviaires et Routiers
This tool organiser is designed to complement my side mounted tool holder for the scraper and a flush cutter. https://www.printables.com/model/655767-side-tool-holder-for-neptune-4-plusmax I've designed this draw to sit underneath the…
Elegoo neptune 4 z-axis stabilizer was made from the front part. This time it is connected both ways.
Made an identical second spool holder to add some symmetry. Also handy to have a second colour already on the spool if you want to do dual-colour prints. Print Settings Rafts: No Supports: No Resolution: 0.28 Filament: Generic PLA Notes:…
I found it very time consuming and confusing to find the right part and print it in the right amount. Therefore i decided to upload a full set to make it easier for people to get started with their cable chains. In the provided .3mf you…
![Elegoo Neptune 4/Pro OrcaSlicer V2.0.0 config [New Firmware]](https://media.printables.com/media/prints/609896/images/6512090_0000f0c6-71c5-412c-915d-776f786325d3_f907e120-f93d-475e-8798-5d4567f5e812/banner-orca-slicer.webp)
