Liczymy pasujące modele…
Instruction Pour water into model and make bird music :) Water level should be like on a picture or a little more. If bird only whistle try tilt it forward. You have to find spot where water is bubbling by you blow. Different tone of…
Say hello to Sylvester and Tweety caught in one of their classic cat-and-bird moments! This fun and playful figurine captures Sylvester proudly holding up Tweety, probably still plotting how to finally catch that clever little bird…
Tweety Bird Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
Tweety Bird sitting Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
Tweety Bird Cartoon character from classic Looney Tunes in 3 different design poses. Single extruder 5 color design First bottom layer: White Second layer: Yellow Third layer: Orange Fourth layer: Blue Fifth top layer: Black
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
For 1997-2001 Jeep XJ I used this tweeter: https://www.amazon.com/gp/product/B075W3NPQ2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Printed in ABS then coated in chassis paint for more uniformed look. Uploaded STL, 3MF and the STP…
Sylvester the Cat and Tweety Bird Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Here you have a heartwarming little, addition to your holiday decor – A charming ornament, perfect for your Christmas tree. This cute little bird features movable wings and head, allowing for lifelike movements that make each bird look…
I seem to have not very good orange PETG filament and when I tried to attach the legs to the body, the thin legs always used to break. I printed many legs on Ender3V2 and broke them all. Finally I've contacted reddadsteve and he suggested…
Tweeter Pod for Scanspeak D3004/602006 & other scanspeak Automotive tweeter (D3004 series) this pod angle 25 degree. Need brass screw insert : M3 x 4 x 4.
Tisknuto bez suportu jen s “BRIM” přilnavostí PETG 235°C,layer 0.2mm ,infill 0% Doba 2h 11min.
Greetings, A few months ago I began designing, building, and testing 3d printed speakers using the SB Acoustics SB15 and SB26 aluminum drivers. The tweeter on all three designs use the Somossonus (AKA Augerpro) waveguides, but with some…
Mounting cabinett for 2" tweeter, tilted 10 degrees backwards, so it fits most car dashboards.
Adapter for Toyota Yaris Cross. To install a tweeter in the triangle plastic cover front doors without damaging the original. The design is for the left door. Mirror on the Y axis for the right door. Three versions, one ready to mount the…
Remix of Tweety by reddadsteve , scaled up to 125% with modified, thicker legs and tail for added strength and durability. Print Notes: A brim is recommended for the body to improve bed adhesion and prevent lifting.
This is a pair of mounting adapters (driver and passenger side) for Toyota vehicles designed to accept tweeters with 1.75" diameters like the Focal in the picture. They typically mount in the upper front doors. The tweeters snap in with a…
Mounting Bracket for 2021+ Subaru Outback/Legacy tweeter upgrade. Created to fit tweeter included in Focal ISU 690. Center hole can be modified to fit other tweeters. printed with ESUN ABS with 0.2mm layer height. Snug fit, glue is…
i have around a couple of 5.25 inches speaker from a QSC ceiling speakers that i wanna use for a car audio ,but came with their own grills with tweeter mounts that make almost impossible to install the hole thing on any car setup with…
Replaces original Audi C4 sail panels 4A0857505 and 4A0857506 with mounts for Morel MT230 tweeters. I suggest printing from ASA filament on an enclosed printer. I've included the original scan of 4A0857505 if you want to model different…
I did the common upgrade on my VW Caddy and fitted a Touran dashboard. The dashboard didn't come with any tweeters and I wanted to fit a set of Focal IS VW 165 component speakers. So I designed this tweeter adaptor from an image I found…
Tweeter Pod for Scanspeak D3004/602006 & other scanspeak Automotive tweeter (D3004 series eg. D3004/602006) this pod angle 25 degree. Need brass screw insert : M3 x 4 x 4 for tweeter mount and M3 x 3x 4.2 for pod to mount bottom base Need…
I didn't want to cut out or drill in to anything, doors or A pillars so for now I made a simple adapter that fits in place of a factory mounted tweeters. Tweeters that I have are around 42 mm in diameter (from an Excursion SHX-6C set) and…
2,5 inch tweeter casing for DD-audio vo-bt25. Model is parametric. https://ddaudio.com/vo-series/tweeters/vo-bt25/ Feel free to adjust the model for your needs.
I've made this adapter to fit my JL Audo tweeters. I've also uploaded a STEP file.
Adapter for a VW T5.1 to mount Audison APK 165 set. Printed with PLA: 4 Walls 3 Bottom Layer 4 Top Layer 0,32 layers Designed after the OEM-Holder and to fit on Ender 3 with 220 x 220mm buildplate If you need diferent diameter on the…
Anello di supporto per tweeter per Renault Megane 3 Tweeter support ring for Renault Megane 3 Category: Automotive
These are speaker adapter mounts for BMW E46 front doors. There is a mount for both the tweeter and woofer. The mounts are designed for a JL Audio C3-525 component set but I have included generic .stp files for the mounts to adapt the…
If you enjoy the model please like and follow for more!
Tweeter Pod for SB Acoustic SB21RDNC/SB21SDNC (25 degree angle) For SB21SDNC don't use the grill because the tweeter dome is higher Brass insert M3*4*4 Screw M3*8 Recommended print with ABS
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Simple bracket for 1.gen Scion to replace the speakers in the dashboard
40mm front dash tweeter bracket for GP/GJ Impreza, XV, Crosstrek (2012-16), to adapt the factory tweeters to a 40mm round aftermarket tweeter. Probably also fits VM Levorg (2014–20) and VA WRX (2015–18) as the Subarus from that era used…
Redukce pro namontování výškových reproduktorů průměru 36mm do vozu Nissan Navara D40. Pravděpodobně bude pasovat i do vozu Pathfinder R51.
This adapter was used to mount a 25mm twweter of u-Dimension EL Comp 6 system into BMW E46 coupe. You need to print an aditional RH version of LH model provided below.
Tweeter adapter for Toyota BB. Mounting hole spacing +-124mm, middle hole 51mm. Thickness 5mm.
Print face up with minimal support. Tweeter hole diameter is 1.9 in. ID. Be sure to print with PETG, ABS, ASA or Nylon to withstand the temperatures inside of a car during warmer months. Hole alignment is perfect.
This custom-designed enclosure is perfect for housing your 2.5-inch tweeter speaker. Whether you’re a DIY enthusiast or just want to enhance your audio setup, this compact and functional enclosure has you covered. Features : Cable Hole :…
Tweeter Horn designed for JBL 240H, the lower diameter is 80mm and the upper is 160mm. Could be printed whitout support, i printed it whit SunLu PLA 10% infill on my BambuLab P1S
A speaker for a tweeter unit, made for cars.
The B&W P6 speaker has the iconic external tweeter pod. The tweeter is protected by a mesh “basket” that is connected to the pod housing by a retaining ring that snaps onto ridges on housing. Most P6s on the used market no longer have…
Colors: White - egg and eyewhite (left and right) - support is needed for the place of the feet only Reg (or orange) - beak and feet (two items in the print) - no support needed Yellow - head front with spring, head back and head pin - no…
This is an adapter designed to fit Pioneer DS-591A Tweeters to snap in the factory location for my wife's 2015 Honda Odyssey. After savaging my local you-pull-it junk yard for connectors I noticed that this design would fit most Honda /…
This is an plate to fit aftermarket tweeters (ETON POW 200.2 etc) into the dashboard of an Audi A4/A5 B9. Might fit as well into the Q5 (FY) but i didn't test this. Print in ASA/ABS/PETG 20% infill
These are included in the Hertz DSK 130.3 component speaker set. The center hole is 36mm which may fit other tweeters. These fit below the original BMW perforated cover/grill. I designed them so that no supports are required when…
I used brass inserts at the hole locations. This ring was printed in ABS and mounted using fiberglass epoxy. Then bodyfilled/sanded/painted into a door window sail. The grill is a 3" universal from amazon that slips into the ring lip.…
I needed a tweeter adapter for a Ford Mustang MK6 so I could install bigger speakers. I forgot to make more photos before installing them, but they work just fine. I also attached Fusion360 save for anyone who wants to remix it. At the…
These are plates to cover the tweeter holes on the rear deck speaker box of a BMW E30.
i created this mount for 38mm tweeter to mount them on the Golf 2 Dashboard so they dont jiggle around.
Support Tweeter and Midrange for Brax Model ML28 and ML3. Print in PETG
Its already been a couple month I install it, if my memory is good, it was really tight. its the only pic a have, its clip from behind
Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) for the alpine S2S69c
Tweeter pods made to fit along the sides of the dashboard. Some sanding will be required on the left pod to get a perfect fit. Additionally the tweeter holes could be adjusted to fit different tweeter sizes.
Reverse engineered from the factory tweeter mechanism. Tested and fitted in a Peugeot 308 SWII with the JBL tweeters, but it is probably compatible with other Peugeot models as well. The back has holes for three standart M3 heatset…
Bracket must be printed in PETG (or similar). Would recommend adding a bit of foam between it and the speaker back. Mount can be printed in PLA . A small, paint-on support for the cut-out bit is ideal.
6x9 grill with no cutout for tweeter or logo. meant to replace the original grill in a previous design
made for Rainbow DL-T20, maybe fits for other 25mm tweeters
This is a tweeter adapter for the B&W CDM 7NT to replace the out-of-production tweeter. This design is created for the SB Acoustics SB29RDNC Ring Radiator tweeter. This tweeter was chosen because of a few reasons. Ring radiator tweeters…
Anello di supporto per tweeter per Ford Focus mk2/seconda serie Tweeter support ring for Ford Focus mk2/second series Category: Automotive
Bracket designed to mount a custom tweeter in a 2020 Kia Niro, but I believe this would fit any Niro from ‘17-’22. Modeled to fit an Audiofrog GB10 - tweeter drops in on the “shallow” side, and then use the spring, backing plate, threaded…
Remix of Monster Tweety by bpitanga , adding a pin between the front and back halves for easier alignment.
The base model Hyundai Sonata has a sound system that leaves a bit to be desired. Most annoyingly, the vehicle has no tweeters but instead points a "full range" driver at the windshield. This plate allows for replacement of the driver…
Needed 2 speaker boxes for a piano upgrade. They hold a 1.57" speaker. They require 2 pieces of .03" thick .08 round hole perforated stainless steel sheet 1.815" x 2.75" for the grills. Mounting screws at #8-32 2" long+ I used 2-½ long…
These are included in the Hertz DSK 130.3 component speaker set. The center hole is 36mm which may fit other tweeters. Note the original BMW perforated cover/grill will not fit over these unless you cut the Hertz grill. See my countersunk…
I ordered the tweeters online and to get them to fit cleanly made up these adapters. Stock tweeters aren't terrible, but these are crisper/brighter. Printed in PETG.
Adapter to mount Infinity tweeter to original door tweeter mount. No cutting, or modification of door panel needed.
Mounting bracket for Pioneer D-Series tweeters (fits TS-D65C & TS-D69C). The two pieces are made to nest into one another, fully encasing the tweeter body. Made originally for a 2001 Mazda MX-5 Miata, this mount can be resized to fit any…
Updated my speakers on my van and needed to make som adopters. one 6.5 and tweeter upgrade booth are made to be basic to print so not super much details, but worked fine. The 6.5 door speaker neede just a bit more distance from the…
Diamètre filetage (mm): 22 x 1-3 / 8" (34mm de diamètre) Diamètre de perçage : 85 mm conception solide.
a steeper angled part (50 degrees) to improve the directionality of the tweeters, with the sweep starting on the bottom surface to prevent touching the windscreen. best to print this in PETG or ABS, as with direct sun, it could get quite…
Created this adapter to upgrade the tweeters in my Honda Fit. Designed to fit a Hi-Vi T20-8 tweeter and a 3rd-order passive crossover. Spent way too much time on this so figured I'd share. Printed with ASA for heat and UV resistance.…
This is an adapter to put aftermarket tweeters in the stock location in the D2 A8 & S8 front doors. The original, shown with the BLAM TS20HR tweeter fitted is 34.4mm (90/67ths of a freedom unit). There are also 36, 38, and 40mm versions.…
I made this bracket for the Kicker CST20 ¾" tweeter speakers to mount them in the dashboard of my 2014 Subaru Outback. I printed them in PETG to withstand the heat experienced in the car, and used 100% infill to prevent any interference…
After my speaker fell down the tweeter mount broke up, so I modeled it to fix the speaker. Came out flawlessly. Supports: Yes Infill: 100% (can affect sound quality)
Volkswagen MK1 Tweeter halter für hertz HSK165
Star grill for 4x6 grill assembly with no tweeter cutout, meant to replace the grill on my nvx 4x6 grill assembly.
Upgrading the sound system in my NC1 Miata I needed an adapter plate to mount my new tweeters. V3 is the final revision and will adapt any 1" tweeter that uses 4 screws to mount to the door location. I specifically used Recoil TW250.…
Toyota Avensis T25 EU compatible tweeter speaker trim for custom speakers (such as Ground Zero) Modelled in Fusion360 based on the original Toyota Avensis tweeter speaker mount with better speaker angle and fitting for aftermarket…
Attention, scouts and adventure seekers! Get ready to elevate your scout gear with thisTweety Bird Scout-Inspired Woggle. Whether you're a boy scout, girl scout, or guide, this adorable 3D-printable design is a must-have for your scouting…
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
Simple adapter to fit Hertz DT 24.3 tweeters (from the Hertz Dieci DSK 165) in a gen 4 Subaru Legacy. Should probably work for an Outback, as well as for a different tweeter with a similar diameter. I used a little foam pad on the bottom…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. The upper hole is meant to be used with a…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
Trombetta per tweeter Hertz ST35,adatta ad ogni tipologia di portiera,super solida e robusta,suono performante.
Prusa Prusament PLA Simply Green Tweety : https://www.printables.com/fr/model/62494-tweety
a bracket for the S2s69c 3" midrange driver for a subaru
***COMPLETE REDESIGN FOR BETTER FIT AND EASIER TWEETER MOUNTING*** What I have here are generic left & right tweeter mounts to secure aftermarket tweeters in the stock location of CN7 Elantras. They can be drilled or modified to accept…
Tweeter pods seen at Slamology 2026. They contained tweeters from the QS line but these have been updated to work with the CS tweeters since they are available for purchase. I've also inculded the model for the KSC270 midrange speaker.…
Custom Tweeter cover for JBL stage2 components for Fiat Linea phase1 and Fiat Grande Punto I used ASA for printing. After painting, I assembled it. ABS PETG can also be used. The tabs fit into place; I assembled it without needing to…
A few years ago, one of the tweeter speakers from my Pioneer S-H510V speaker set died. I used this set of replacement speakers from Aliexpress: Aiyima 2Pcs 52Mm Audio Draagbare Luidsprekers 6 Ohm 30W Dome Zijde Film Tweeter Abs Hoge…
FR: Support reprenant les côtes d'origines avec adaptation pour l'impressions 3D. J'ai essayé de rester fidèle au plus possible à la pièce d'origine, ça me parait bien. Il vous faudra la grille d'origine, je suis entrain de créer un outil…
It is a tweeter holder for a bookshelf speaker with a exponential recess and a space for a tweeters lip. I printed it with supports and 28mm layer height.
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
I wanted to mount tweeter in better place for my car. the oem placement was quied bad. So i desidet to desing better . This took me 6h to modeling and testing but now it is ready and i want to share with you all. i will test it in use for…
ABS is highly recommended.
I previously designed and published adapters for aftermarket 6.5" speakers to fit my car. With the addition of crossovers, the factory tweeters also needed some attention—but I wanted to keep the stock look. I picked up a spare set of…
Clio 3 RS 200 Dashboard Tweeter Spacers / Adapters / Mounts / Rings Inner diameter of 41.5mm to fit Hertz Mille 25.3 Tweeters. Fabric tape to make snug. Can be modified for a tighter or looser fit. Print Settings Printer: AnkerMake M5C…
ENG The part is raw, to be able to have the "grid" effect, you will have to make modifications in the slicer (prusaslicer). Official tutorial: https://www.youtube.com/watch?v=6PVeh43Or-g. The modifier cylinder must be 39.23/39.23/0.6 mm…
This mounting solution used the factory location with the factory screws to let you mount any tweeter component speaker with a screw mount that you desire. The hole is currently set to 40mm, but i have included the f3d file to allow you…
