Liczymy pasujące modele…
Cup/bottle holder; Height: 15cm; inside diameter: 9.4cm Fits 1L /32oz nalgene bottles, ninja smoothie bottles and other large bottles. I also made the clip for it slightly tighter (2mm) and 1mm wider around the attachment part so it sits…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
I liked the cup holder that VersusMakes published. But when I added my tall bottle it would turn and drop. The bottle dented and the cup holder broke :( So here's what i changed: changed clamp so its at a fixed 40° angle → the holder…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License Flowalistik…
We had moisture problem in a room of our flat. The moisture cames throught the suspended ceiling and the wall. After renovation we wasn't sure that all moisture was gone. I decided that we needed a circulation in the ceiling. So i tought…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License Flowalistik…
I upgraded the IKEA UPPÅTVIND air purifier to make it more useful for 3D printing. The stock filter works well for particles, but it doesn't do much for VOCs and odors. So I designed a 3D printable add-on that adds an activated carbon…
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
The metallic/plastic cover does not stay down and the curd gets dry. Now this holder will keep the cover down. Didn't want to print full cover this time though. The small piece in one picture is a prototype I made to ensure that the size…
Uppababy Vista Cup Holder. Now with enhanced stability! Fits snuggly on the frame. After testing the original model, I made some improvements to it. Printed in PETG, didn't test any other materials. Don't forget to enable supports!
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter.
Important notice: I have no idea what I'm doing. Please consider this when printing my models! These are simple holders for a LED string light on the Uppababy Vista V2 stroller. There are two parts: 1. **Battery Box Holder**: Fits a…
Keyboard knob with our Mascot Cuppa! Two versions one for ridged rotary knobs and another for the half circle type. For more cool stuff drop by our community tech blog and find your way to our discord to meet fellow makers of all kinds.…
This model includes the clip necessary to attach the drink holder from the parent remix to the Uppa Baby G-Luxe stroller. I have included the left and right sides, but I printed two because staying hydrated is important.
Fits a modified Starkvind carbon filter between Uppatvind air purifier and its HEPA filter. Print 4 times. First, you need to modify a Starkvind carbon filter: https://www.ikea.com/be/nl/p/starkvind-koolstoffilter-80488129/ For this:…
Cup holder for large 40oz water bottles that attaches to Uppababy Vista V2 Stroller.
I liked the cup holder that VersusMakes published. But when I added my tall bottle it would turn and drop. The bottle dented and the cup holder broke :( So here's what i changed: changed clamp so its at a fixed 40° angle → the holder…
I designed a frame to integrate a IKEA UPPATVIND into my LACK enclosure. While designing it I found that a XSARA PICASSO cabin filter (e.g. RIDEX 424I0203) has comparable dimensions. Still I had to design a adaptor for it since it was 1mm…
Nalgene/Hydroflask mount for the Uppababy Vista stroller.
Cup holder that can mount on the stroller using the accessory mount by BuckBuckPrint . The insert is optional. I printed the cup holder upside down, to avoid support material around the accessory mount interface. The insert provides a…
Created for my son to play with. Just add 22 pcs of R4 x 1.7 magnets to hold it closed. PawPatrol Logo is glued on.
This model is optimized to use heat set inserts and also removes the unnecessary screw in the middle of the cassettes. This only includes models for the filter cassettes, for the rest of models needed for this project check out the…
Adapter for attaching the tray from an Uppababy Vista stroller to a Tern Clubhouse+.
Design I originally intended to use magnets between the frame and the duct guide for easy cleaning. However the magnets (6mm diam, 2,5mm thick) where just too weak and it did just not seal good. So I ended up gluing everything together…
Thread: 4 mm / 28mm diameter / 2 starts / 10mm thread length Diameter: 24-22mm / Slope 3 deg An adapter for an electric air pump to pump up a stand-up-paddle-board (SUP).
pupparang to go with batman dog mask. I did not make the mask scale up or down by measuring your dogs head side to side that's all i did to make mine.
A duct connector that merges two 110x55 mm rectangular ventilation ducts into one 110x55 mm duct
Airtag holder for the Uppa. Specifically made for a Vista V2 but may work with others. Very discrete since it mounts to the underside of the foot section. No tools required for installing.
3D PRINTING The print takes around 200g of filament (1:64 scale). NB! FOR 1:64 YOU NEED TO SCALE THE MODEL TO 120% IN THE SLICER! The roof needs to be printed upright with bed adhesion enabled . The terrace was simplified so it could be…
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter.
This remix makes the frame of the UPPATVIND Carbon Mod printable on a printer with a bed as small as 140 mm x 120 mm. This doesn't change the fact that you need a bigger printer to print the cartridges, but this still makes it printable…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License Flowalistik…
I will describe some print settings I used, but just use what you would normally use. Most important is to pay attention to the infill of the cassette, because it has to fit the activated carbon in the main section and the front has to be…
We had moisture problem in a room of our flat. The moisture cames throught the suspended ceiling and the wall. After renovation we wasn't sure that all moisture was gone. I decided that we needed a circulation in the ceiling. So i tought…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License Flowalistik…
I upgraded the IKEA UPPÅTVIND air purifier to make it more useful for 3D printing. The stock filter works well for particles, but it doesn't do much for VOCs and odors. So I designed a 3D printable add-on that adds an activated carbon…
Created this part from a viewer request - so i haven't printed this part, just did the CAD! In this frame the stock cloth filter gets inserted Due to better print orientation i made the pins a seperate part The four pins can just be…
CUPPA 2 is a tea bag organizer designed for your countertop. This artistic, rounded version keeps your tea corner tidy. Choose your favorite colors and create a functional, colorful display that fits your space perfectly. 💎 Commercial…
☕ Meet "Cuppa" – your new favorite morning coffee companion and the coziest little desk planter you'll ever print! ✨ Welcome to Vol. 93 of The Honest Shelf Series ! I spent days sketching and testing this little guy because I wanted to…
We have an older model Uppababy Vista stroller. There are two locations that look like they were made for accessories. I printed https://www.thingiverse.com/thing:4610087 and then designed this clip to use along with it. Printed in…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Cuppacceetle, Tabletop DnD miniature 2 poses running and sleeping 25 mm medium base which can be…
A remix of the mentioned model by Gurnarok to handle the UART adapter for Victrons VE.Directs by Duppa . Prints with supports for the holes. Small standard torx screws necessary. For more information see…
One of the pitfalls of the Uppababy Cruz stroller is the small latch that keeps the stroller folded. This latch inevitably breaks with use, making the stroller cumbersome to fold into a car. With this replacement latch, you can have your…
I designed this hook for my hydro flask but it can be used for anything you would like to hang on your stroller. No supports needed. Use 4-6 external walls for extra strength. I recommend PETG for temperature resistance. Use lubricant on…
I remodeled and made some changes to an existing design for an UppaBaby Vista stroller cup holder. I provide 3d files with the design as well as the stl for both part: the cup holder and the clip. please note that I didn't had the chance…
One of the wheels on my Uppabay Cruz V2 baby trolly had a lot of slack/movment when i put the brake on. So i removed the wheel han foud out that a lot of the spokes where the brake pin engages had broken. I made this part to replace 4…
A fin for the pure standup paddleboard bougt at xxl. Fitment havent been done, so first try only printing bottom part. The original item broke when supping.
Rather than buy a whole new cup holder just for the clip, I designed a replacement . I printed it with PLA in the same orientation as the STL file (otherwise I think the post and/or arms could shear off too easily) with generated supports…
Carbon filter adapter for Ikea UPPATVIND I'm using this cheap Ikea UPPATVIND air purifier in 3d printer enclosure. Air purifier lacks carbon filter, I have added adapter that I can use custom one. Tested filament: petg Parts (minimum):…
This adpator is for an ikea UPPATVIND filter to 3 inch air duct. I used it to channel half the air outside and half to circulate inside an enclosure. A piece of carbon filter can be placed inside for more filtering.
This is a clip that goes on the handle of an Uppababy carseat/carrier which can hold contrast cards. The v1 model requires two cards to be inserted in order for them to not fall out. I have not tested the v1.1 version but I made the card…
Our used Uppababy Cruz V2 stroller was missing the plastic latch piece that holds it closed when collapsed. I created this one based on my own measurements and testing. Printed in PETG with supports. It requires some flexibility to…
this is a replacement latch for Uppababy Vista stroller
This model is a simple way to mount an Upptvind filter. The key design feature is printability in one piece on most standard size 3D printers including Prusa MK4 and Ender 3 size printers. The end product can be free standing or hung up…
The retaining clip to hold the cupholder broke, but why throw away the whole cupholder?
Uppababy Minu v2 stroller cup holder I was looking at buying a cup holder for the stroller, and they were expensive. I designed this instead. Features Easy snap-on and removal to/from stroller Securely attaches Fits a variety of bottles,…
Adapter um Standuppaddleluftpumpe für andere Sachen zu nutzen
