Liczymy pasujące modele…
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
Simple 90 degree angle mount for the Segway Navimow i105e/i108e antenna. Designed to be printet without supports. Really sturdy with these print settings: 0,2mm layer height 3 walls 5 top and bottom layers 25% grid or gyroid infill If you…
This is a remix from @massis to mount the Navimow's GPS receiver with a 90° angle.
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Soporte que permite usar teléfonos de varios tamaños o Tablet. Puede imprimirse en cualquier material, podría imprimirse todo sin soporte. pero queda a su juicio…
Eine Wandhalterung um das Netzteil sicher aufzubewahren und zu schützen. Das Segway-Netzteil / Trafo Halterung passt zu folgenden EU-Mährobotern: Navimow H500E Navimow H800E Navimow H1500E Navimow H3000E / H3000E VF Navimow i105e Navimow…
Simple 90° angle mount for the Segway Navimow. I chose a design that is easy to print. I used PCTG for temperature resistance. 25% cubick infill 5 top and bottom layers 4 perimeters
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
Upgraded Wheel and Tread system for the Segway Navimow i Series! When I first got the Navimow I was so disappointed I was planning on returning it. It couldn't navigate the grass at all. It would get stuck left and right. I turned to…
Glue the cap on. print solid or with 40+ infill.
The Segway Navimow robot mower has a compartment that is intended for their Navimow Access+ 4G Module cellular theft-tracking tracking accessory that is $150 USD and that doesn't even include the cellular fee you have to pay after the…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Compact case for KHADAS VIM3. Before inserting the VIM3 into the case: break out the support-plates out of the plug slots insert the 3 button-parts into the button holes remove the SD-card from VIM3 Heatsink, coolerfan and case are fixed…
Excellent design by UN3X. I just slightly remix it to be easiser to print and fully compatible with vim1s.
Mount for a Segway Navimow GPS antenna, made to fit on a standard 90mm wood beam as I wanted to mount mine up on top of our pergola in the backyard.
2020 T- Slot Foot Cap Low Type / Floor Mount Aluminium Profile - Flangia Base a Pavimento Profilo 2020 Bassa Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
Messerteller ist 220mm groß mit Messerklingen 254mm Schnittbreite mehr geht nicht. Messerschutz wurde auch erneuert und für den größeren Messerteller vergrößert. Mähgeräusche etwas lauter. Mähtest laufen noch. Was benötigt wird…
Replaces the OEM "skirt" and adds extra bumper width on the right side to avoid getting stock around sharp corners. Scanned the shape with a “Revopoint Miraco PRO 3d” Scanner for optimal fitment.
vycentrované použité závitové vložky do plastu M4 , šrouby původní ( v originálním balení jako náhradní s bříty 9 + 9 ks ) použil jsem ASA , určitě by vydržel i z PETG bílá barva na unašeči není vada tisku ani materiálu :-)
Early version of a case I designed for the VIM4. It supports all ports and buttons, though it does not expose the main pin header, and does not have a spot to secure the external A/B antennas. Air vents are aligned to match the active…
2020 T- Slot Foot Cap / Floor Mount Aluminium Profile - Flangia Base a Pavimento Profilo 2020 Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
I printed this with PETG and made the walls thick but you can adjusted to however you need. The original leg height is 65mm, the one I created is 105mm, but you can use the Fusion360 file to adjust it to your likes. The original screw…
This is a muzzle modification I made to make my closed muzzle Salvimar speargun into an open muzzle speargun.
A replacement for a paper ruler that fell apart after a few uses.
After reading about blade disc tuning, I've decided to try my own version. The idea was to use the original disc and have a minimalistic, lightweight design. It worked flawlessly last season on my H800E. Printed with PETG, 100% infill.…
Um den Abstand zwischen Scheibe und Klinge wie beim orig. nachtzustellen, empfehle ich noch zusätzlich eine 4mm Scheibe beizulegen. Damit drückt sich auch der Schraubenansatz nicht in den Kunststoff ein. Verwendet werden normale M4…
Tested with Navimow i series i105e Additional things 8x threaded inserts (M4×8,1×6mm) 8x blades Tested with ASA at 15% Infill The noise increases slightly after installation NOTE: Use at your own risk!
This holder allows you to mount the Navimow GPS RTK antenna to a location where a longermounting distance is necessary. The pipe is 20 cm long.
A custom-designed adapter ring. This modification allows you to mount 6 blades instead of the standard 3. Materials Needed: 3 x M4 x 8mm screws 6 x M4 x 6mm x 6mm inserts Printing Specifications: Material: PETG Infill: 100% Layer Height:…
Moin, original sind nur 3 Klingen an der Messerscheibe, war mir zu wenig für ein gleichmäßiges Schnittbild. Da es fast nur platte Scheiben ohne Design und mit Einpressgewinde online gibt, habe ich mir ein eigenes Modell erstellt. Warum 7…
print it slowly with support Category: 3D Printing
This is a wall mount for navimow GPS. You need the upper portion of the original pole. Of course you can use it for any other pole with 25mm diameter. Additional you need 2 M5x35 screws and M5 nuts. This mount is in 2 parts so you have…
Modulare Wandhalterung Für Segway Navimow i Serie. Länge des Auslegers kann man selber bestimmen hab es so Konstruiert das eine Garderobenstange benutzt wird. Länge frei wählbar. 17.06.2024 Update habe noch mal einen Adapter konstruiert…
Die Halterung eignet sich perfekt zur Montage der Segway Navimow Antenne an einer Wand. --- The bracket is perfect for mounting the Segway Navimow antenna on a wall.
I was thinking of putting something in the VIMAR plana plaque, so I redesigned it. it is exactly the same to the original. It works with all the VIMAR but I did for the external plate. I am thinking of putting some electronics inside ;)…
Remixed wall mount for Navimow i-Series GPS-receiver. It carries the 25.4mm extension-rod that came with the antenna to rise it above roof-level. Update: added a strong version with modified cross beam to reduce wind induced vibrations.
This is a simple garage for the Segway navimow robot lawnmower. The construction is based on 25mm (1") diameter water pipes and 4-5mm thick polycarbonate multiwall sheet. You will also need about 16 M4*35 screws, ideally with a decorative…
LadyDevimon Digimon Creature Model
Our IKEA VIMLE fold-out sofabed has removable seat cushions and back cushions. The area underneath the seat cushions is a very smooth consequently, the cushions "creep" forward whenever you sit down, stand up, or squirm around, leaving…
Couch Cup Holder designed for ikea Vimle
This 3D-printed planter brings a natural woven basket look to your home décor. Featuring a rounded design with a detailed wicker-like texture, it combines the warmth of traditional craftsmanship with the modern precision of 3D printing.…
I wanted a simple holder for an AirTag in my Navimow i105, as I didn't really need the Access+ module for anything else than tracking. The model doesn't need a lot of infill etc, as it is not structural. Just throw in an activated AirTag,…
I needed to leave my buried navimow cables and antenna pole out in the winter, but I wanted to protect them. Annoyingly the navimow package doesn't include caps for the cables and they have some weird custom M13x1mm threads. I hope this…
I created this case for the Khadas VIM 4 with the M.2 Addon board, all ports are available and there are holes to allow access to the thre buttons.
Please like model, if you are satisfied. Antenna mount to roof for Segway Navimow. Height 54mm.
The Segway Navimow has impressive navigation capabilities and even offers manual control via the mobile app over a Bluetooth connection. However, like most robotic mowers, it tends to leave a fairly wide strip of uncut grass along the…
Modello di riproduzione 1:1 della placca Vimar 8000 a 3 fori
zakladna 100x100x107 tisk je z ASA vrstva 0.20 Vytvořen gcode pro MK4 stl soubor vsechny tiskarny
Replaced the fillet with a chamfer for better printability
Case for Khadas VIM3L with M2X extension installed.
Cup & remote holder for the IKEA VIMLE sofa/couch (standard width armrest). Uses a printed Skadis board to allow for flexible attachment of holders. I deviated from the original Skadis hole geometry very slightly to make the overhangs…
Button box model and access to the connector. Possible installation of the board with and without a radiator.
A couple of Gridfinity bins to hold a “year's worth” of extra Segway Navimow blades and screws. The blade bin stores the blades in a way that keeps the sharp sides safely stowed, but still easy to pick out when needed. Print with your…
Mount for an Navimow X3 GNSS antenna. Dimension: 119 x 80 x 70 mm printed in ABS with 15% infill and 3 perimeters works well Category: Outdoor & Garden
I needed an extension for the feet of my ikea vimle sofa so that my robot vacuum can fit under it. I specifically adjusted the height to fit the Roborock S55 (newer models should fit also. It's a simple print in place model which fits…
Frame / cornice per scatolette portafrutti Vimar da 3 slot. Compatibili con la linea IDEARondò Best in PETG ma also good in PLA. Frame for Vimar fruit boxes with 3 slots. Compatible with the IDEARondò line
Cutting disc blade for Segway Navimow X series. Consist of two parts for easier printing without support. You will need 12 M4x20 hex screws and 18 M4 nuts. You can use original segway blades. When printed, holes for blades will be blocked…
New version Convertible cavalry movement tray 123 - 1234 Cavalry movement tray for TOW. It is divided into 2 sections so it can be printed on printers with a 220 x 220 bed. The attachment system allows assembling the pieces and provides…
Dato la mancanza di un modulo che possa poter montare il crono termostato su di una scatola vimar ho realizzato sia la piastra di base che la maschera o cover per il suddetto modulo. per l'ancoraggio della cover bastano 2 magneti 8x3mm…
The Ultimate Hacking Keyboard comes with a normal arrow key cluster layout on the Mod layer. As a long time user of VIM I'm always using that layout to navigate around. These keycaps replace the default ones to correct the shortcut labels…
This is a module that fits Vimar Idea frames and that can be used to mount anything you might desire to add next to your power sockets or switches.
Prevents the cushions from sliding/creeping forward.
Wem die LED zu auffällig ist, kann diese Blende anwenden. Ich würde mich über ein Foto dieses Objekts freuen.
Descripción This is a new version of watch movement holder. In this version it can be adjusted according to the diameter of the movement, it also has a bidirectional rotation and an internal spring allows the desired position to be fixed.…
Blade disc for Segway Navimow H1500E that has 6 blades instead of the original 3.
Key fob for the VIMpayGo micro Mastercard. All cards in mini-SIM format are compatible. https://www.vimpay.de/vimpaygo/
KHADAS VIM1 CASE Screwless model.
Was one of the models I used for testing the printer. Used draft settings, PLA and PRUSA MK4 printer.
I printed with the finest setting on my printer (0.08mm) with a 0.4mm nozzle using PETG. Friction fit a 6x6mm cylindrical magnet into the 6mm hole. Use 5minute epoxy to glue to your ratchet. Magnets I used:…
Devimon Digimon Creature Model
Incollare con colla a caldo o con Attak il supporto alla scatola. Si riutilizzano le viti e in 2 minuti si ripara la scatola in modo veloce e funzionale. Stampato in PLA Category: Electronics
Winter cover for the lower bar of the GPS-mount bar of the i-Series Navimow, printed in PETG.
This is a "stronger" and "taller" version of an RTK mount. The original was a good base, but he antenna was still below the roof line. This brings it up higher and is extremely strong. The weakest point is probably the two screws that…
Bandejas de movimiento de peanas cuadradas para wargame de diversos tamaños: x10U of 25x25mm or x5U of 25x50mm x20U of 25x25mm or x10U of 25x50mm x30U of 25x25mm x10U of 30x30mm or x5U of 30x60mm x20U of 30x30mm or x10U of 30x60mm x30U of…
DIDATTICA MOVIMENTI MECCANICI GT4 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
This small tool makes it easy to unscrew the filter insert from the tap for cleaning. Easy to print and easy to use. Mit diesem kleinen Werkzeug lässt sich der Filtereinsatz zum Reinigen leicht aus dem Wasserhahn herausschrauben. Einfach…
A wall logo I made based on the popular Vim text editor. It's not perfect but looks close enough. Print Settings Rafts: No Supports: No Resolution: 0.2mm layer height Infill: 10-20% Notes: Print with ironing enabled if you want a smooth…
Уголок - от сетевого оборудования, вроде свитча. В уголке нарезал резьбу M6 и законтрил гайкой, для того что бы можно было разбирать катушку. Заполнение 100% Видео : https://youtu.be/_f9vSjc-Hd0 Category: DIY
Segway Navimow X3 Series Antenna Mount Mount to a wall, roof peak, or under a gutter. Length: 230mm Width: 90mm Height: 80mm Simple printing, no supports needed. I recommend printing with PETG; 5 layers; 45% gyro.
DIDATTICA MOVIMENTI MECCANICI GT2 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
I due pezzi che compongono il modello possono essere stampati con i dati standard della vostra stampante unica differenza che il pezzo “Maschio” dovrà avere il supporto.
Deprecated This is a sturdy 1U mounting panel for 10 inch server racks fits VIMIN 6 Port 2.5G Unmanaged Network Switch. Mounts with regular M6 cage nuts. Material PETG, PLA Layer height any (I used 0.2mm) Raft nope Supports nope Infill…
Designed specifically for the Navimow i110N, this custom container offers an alternative to the official GPS tracking accessory. It securely holds a Samsung Galaxy SmartTag2, providing an affordable and effective tracking solution. The…
DIDATTICA MOVIMENTI MECCANICI GT1 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
DIDATTICA MOVIMENTI MECCANICI GT5 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
This watch movement base kit offers a versatile and practical solution for basic watch repair tasks. Ideal for watchmakers and technicians, it allows for efficient disassembly, adjustment and repair of watch movements, making it an…
DIDATTICA MOVIMENTI MECCANICI GT6 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
This adapter will allow you to mount the Segway Navimow (i110 at least) RTK to chainlink fence posts. This may allow other "poles" that are about 1" (25.4mm) thick to attach to chain-link posts. There is a extra little "hole" on the side…
Modeller yapay zeka ile oluşturulmuştur. Toplam 67 model bulunmaktadır. Çoğu üründe baskı sırasında destek gereklidir.
I've created Fallout themed adapter for GoPro Hero 1/2/3/4 for feiyutech vimble 2 gimbal. It's easy to print, no supports are required.
DIDATTICA MOVIMENTI MECCANICI GT8 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
DIDATTICA MOVIMENTI MECCANICI GT9 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Bandejas de movimiento de peanas redondas para wargame de diversos tamaños: - 25mm - 28mm - 32mm - 40mm - 50mm
DIDATTICA MOVIMENTI MECCANICI GT7 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
DIDATTICA MOVIMENTI MECCANICI GT10 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
DIDATTICA MOVIMENTI MECCANICI GT16 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
adattatore per placche VIMAR PLANA 2 frutti
Printed Parts Required to Complete Assembly: (1) "mt32_frontmod" (1) "mt32_back" (2) "mt32_buttonmod" (2) "mt32_spacer" (1) "mt32_stand" (Optional) IMPORTANT NOTE! - #1 - These models are intended for resin printing only, FDM or other…
DIDATTICA MOVIMENTI MECCANICI GT3 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
