Liczymy pasujące modele…
For parts like the nacelles just mirror the parts in your slicer to get both sides. Hardware used: -Matek H743 Wlite -Matek m8n gps -Iflight Xing2 1806 2500kv motors -Corona DS939MG servos on tilt, Racestar DS5601MG servo on elevator…
These are the parts I custom designed for my VTOL Stallion. Stallion drawings can be purchased on Flightory website. The servo door is for Emax ES09MD, check for compatibility. The servo doors and FC holders use brass M2 inserts (Length…
There are two versions of the mainbody. One for fdm printers and one for resin printers. The fdm version has no visible cockpits! Pilots and decals are not included. For the display/stand you will need to drill a hole in the mainbody and…
NEW AND BETTER DESIGN https://www.printables.com/model/649545-heewing-t1-vtol-for-gdw425mg-servo-and-emax-2210-m vtol parts for the ranger. designed specifically for emax es08maii servos. printed in petg recommend to print nacelles nose…
Motors: The SLS mounts are designed specifically for this motor as mounting holes are different on most motors. This motor is 470KV and can be found at the following link. Purchase 3 CW and 2 CCW versions.…
Hi Everyone! This project is my first attempt at building a functional Ardupilot VTOL Plane. Check out my new video to learn more about this project: As mentioned in the video, VTOLs have many advantages over both traditional planes and…
There's now a Facebook group to discuss builds, successes and problems. Come join at https://www.facebook.com/groups/vtolhangout July 18 2022 update: Added a new nacelle design that is a bit longer for better airflow beneath the prop. It…
Disclaimer!! This project is currently mothballed, it has reached a point where I can only fix the problems with more money or talent, neither of which I currently have. I uploaded all the files for the design in step, iges, 3mf, obj, stl…
updated version changes: -servos changed to GDW DS 041MG -arms beefed up -motor plate has tab for zipting motor wires to. -m2 hardware for fastening nacelles halves together. Needed: m2 screw kit from amazon 2x 4x10x4 flanged bearing 2x…
this works very well. my build: velox 2306 1750kv motors gemfan 6042 flash props spedix 30a esc stock motor on rear with 5126 lr prop gdw ds 041mg servo speedybee f405 wing cyclone gps/mag ELRS walksnail molicel p42 4s1p pack mid boom…
The individual parts of the organizer are connected using connectors at the bottom. For better connections, it is possible to use polygons connectors for high parts. No need glue. No need the supports. For speed print i use draft. UPDATE…
VTOL VR JOYSTICK A desk mounted VR controller dock/joystick for VTOL VR. The design allows the physical joystick to be in the same location as the stick in the game and to not interfere with using the MFD’s and control panels. Rubber…
Replacement Center Cap for VTO Wheels (Minilite, Watanabe) I didn't like how shiny the stock center caps were on my black VTO wheels, so I decided to model one up in Fusion 360 to replace them. This cap is modeled off of the VTO center…
Hello, I wanted a good fitting, vented FPV canopy to use on the Jumper Xiake 800 VTOL. I found some online, but decided to 3D scan mine and make an exact fit 3D model that could be used to add various styles/designs of cooling vents. I…
Two Surface mount designs for Dahua VTO2202F-P and VTO2202F-P-S2. The OEM part is VTM115. I designed this because Aliexpress delivered my doorbell but cancelled my order for the case, so it was designed based on the doorbell and not the…
There's now a Facebook group to discuss builds, successes and problems. Come join at https://www.facebook.com/groups/vtolhangout The Nano Drak VTOL has been a success and I had a few requests for a Mini Drak version. These are scaled up…
There's now a Facebook group to discuss builds, successes and problems. Come join at https://www.facebook.com/groups/vtolhangout Oct 5 2022: Added a nacelle and motor mount with an cutout for a 3x6x2.5 bearing on each side to avoid wear…
I designed these mounts to attach outriggers to the wings of my Mini Talon VTOL build. The mounts connect the pre-existing twin carbon fibre tube spars inside the Mini Talon wing to 14mm strong longitudinal outriggers hanging underneath…
There's now a Facebook group to discuss builds, successes and problems. Come join at https://www.facebook.com/groups/vtolhangout Here's the maiden video: https://www.youtube.com/watch?v=42L8vE7RcWE And a build walkthrough video:…
Required additional components: 2× DS-S007M 21g servo (or similar, dimensions shown in the image) 2× 623zz bearings 10× M3 × 20 mm screws 12× M1.7 × 4 mm screws (similar-sized self-tapping screws can be used) 2× M3 × 6 mm screws 8× M3…
Hello, I wanted a good fitting, vented FPV canopy to use on the Jumper Xiake 800 VTOL. I found some online, but decided to 3D scan mine and make an exact fit 3D model that could be used to add various styles/designs of cooling vents. This…
MG Logo Center Cap for VTO Wheels Simple center cap for VTO wheels with the MG logo on it (for multi-color printing). I got a fresh set of VTO wheels for my MGB and they came with bright chrome center caps. Since the wheels I got were…
Triumph Logo Center Cap for VTO Wheels Simple center cap for VTO wheels with the Triumph logo on it (for multi-color printing). I got a fresh set of VTO wheels for my MGB and they came with bright chrome center caps. Since the wheels I…
AirOne eVTOL (electric vertical take-off and landing) UAM flying car. use supports. I suggest printing vertically.
Connector for VTOMAN jump starter to replace EC5 connector of the socket cigarette lighter. Printed with PETG filament with supports. Conector para arrancador de batería VTOMAN para sustituir el conector EC5 de la toma del encendedor.…
Not tested yet, you can see how it moves if you want https://www.youtube.com/watch?v=nuYYCQDqobA&lc=UgzzM2lk92OTqofrYvh4
This Lightholder is designed to fit the Lidl Civrit LED Bike Lamp to the reflector holder of a Bromton or other bikes.
There's now a Facebook group to discuss builds, successes and problems. Come join at https://www.facebook.com/groups/vtolhangout Aug 6 2022 update: Updated the param file with my latest tune. Note you need to check that plane is level in…
This is an original design based on the Fanfan from Gundam UC. A VTOL with cannons and rocket/missiles and originally designed at 1/144 to fit your Gundam dioramas. comes as a kit (instructions to follow), and a one-part model that will…
A reasonably detailed replica of the french prototype VTOL fighter. Wikipedia: https://en.wikipedia.org/wiki/SNECMA_Col%C3%A9opt%C3%A8re Most of the aircraft was designed with blueprints from this website:…
I was lucky enough to have worked on the concept we presented at FBoro in 2018 - I used this as a challenge to relearn CAD and learn how to use my new printer - that's why the model is a bit untidy (sorry) It was also therapy as 1 - I was…
The same as the source, but for 16mm tube instead of 14mm. Glue with Uhu Por or hot glue or epoxy. Mine needed to be filed a bit on the lower part connected to the carbon in the wings. This frame might be a little less stiff than a…
Use these nacelles to convert the 1200mm pusher prop Sky Surfer to a VTOL capable plane. 0.2 Layer height 3 walls, you might be able to get away with 2 walls. Filament: PLA+ Print with Tree Supports with Z distance of 0.275 for easy…
This is a simple tilt mechanism that i designed for a VTOL aircraft that I am building. This design uses a standard 40g servo. I used the HXT5010. additionally it uses a 685 bearing. I know most here would consider it a non-standard…
T1 VTOL Rear Motor Mount V1 tail top 12x12mm
This is my take on the shadowrun VTOL "T-Bird" updated to 2075 I want to make it similar but up dated and inherently more stable. Having the thrusters on top pointed down instead of under the vehicle would make it easier to fly and make…
A CAD model of the R-R EVTOL concept previewed at the 2018 Farnborough Air Show. I was lucky enough to have been involved in its design. Note the model has been simplified to aid printing
2D printing (.dxf files are for laser cutting) Wooden base: 6mm plywood Glass windows: 3mm clear acrylic White cardboard: 2.5mm cardboard *Model can also be broken into separate components and 3D printed if desired.
Recently, I purchased a Dahua video doorbell, but it didn't come with a mounting box. Not wanting to spend over $20 for one, I decided to design and create one myself. The box I designed has M4 screw holes on the back, which are spaced…
Für meine bei Amazon gekauften Müsliboxen mit der Bezeichnung Vtopmart 4L habe ich eine Halterung benötigt, mit der ich diese unter der Tischplatte befestigen kann. Da ich keine passenden Entwürfe gefunden habe, habe ich selbst eine…
A hexagonal base for flying units in tabletop games By making base and shaft separate objects, shaft can be printed on 60 degree angle allowing for greater structural stability against shear force and can be easily adjusted in length. No…
Parts as used in the T1-S VTOL video here: https://www.youtube.com/watch?v=8to8lb4HOFc
This is a lid of the small round Vtopmart glass container. Sadly those are not available as a spare part from the OEM, so we made one. The seal from the broken lid fits and it is just as watertight as the original. You can print the clips…
the rear motor mount i recommend to print in 100% fill it don't change the weigh much but gain more strong structure
Replacement for the stock poly-carbonate forward flight motor ESC mounts that are glued to the air frame nosecone of the MFE fighter 4+1 VTOL. This design covers more surface area than the stock piece by wrapping around the corner…
Movtotop Canopy Foot Compatible
Колпачок для спидометра ГАЗ, Cap for GAZ speedometer
Don't forget to like and comment. Material: 4x LED: 5mm diameter (I use bicolor Red/Green) 1x flip switch (thread diameter is 6mm) When combined with one another models of this collection mimic the functionalities of the instrument panels…
Replacement handle for stavtool clamp.
This is a lid of the small rectangular Vtopmart glass container. Sadly those are not available as a spare part from the OEM, so we made one. The seal from the broken lid fits and it is just as watertight as the original. You can print the…
Caution very hard to print and remove support material. Get the super glue ready!
Print If You Are A Fan Of Warzone
use your own print settings havent tried any yet ! A fictional near-future military Vertical Take-Off and Landing (VTOL) aircraft with high detail . It's a heavily armored gunship with a sleek, aggressive fuselage — think somewhere…
A wall mount for the VTOL Heavy Cargo Spaceship I mounted mine using 4 of the XL velcro command strips as my space is rented Could easily be mounted with screws if you just drill a couple holes
Since I print a lot of resin stuff I'm always waiting for UVTools to analyse my files to fix unsupported or weak supported parts of my models and more importantly check for resin traps. So to help people decide whether or not a CPU…
U need to buy 25mm metal or stell ball and 8x8 neodyum magnets, this project is remake of this VR Flightstick for meta quest 1 2 3, VTOL VR Grip by JavierSmith - Thingiverse u need 25mm ball made of steel or metal and 8x8mm neodyum…
a plate to hold 3 ikea HALVTOM 19cm bottles.
Please post makes and comment what you would like to see next! I ended up fixing some of the things I was not happy with on this model so there is a version 2 now.
Mount board for Mateksys F405 Wing V2 and ESC 4in1 including GPS, elrs and antenna mounts.
Dahua VTO4201 adapter to old VTO2000 cover
This stand allows the VTOMAN Jump 600X battery to be stacked with its extra expansion battery. Stacking is otherwise impossible due to the raised, rigid handles on the devices. The small pegs on the bottom of the stand rest in the bolt…
This model is designed to hold the IKEA HALVTOM Salt & Pepper mill. Printed with translucent Recyclingfabrik rPLA “Milchiges Glas”: 15% Infill 0.2mm Layer height No supports Octagram Spiral infill (for the looks) Fuzzy Skin (for the looks)
A quick print in PETG and this screen will keep the rosemary leaves in the bottle when pouring oil. Its made to fit snug so the herbs wont make their way around the screen, there are two small tabs to assist in removing it. You'll likely…
The adapter is assembled from several parts, which are joined together using super glue. The "aperture ring" part must be printed with supports. Printing the "Ring gasket" component is optional; it is needed to reduce friction between…
The adapter is assembled from several parts, which are joined together using super glue. An insert is included to reduce internal reflections within the adapter. It is best to print this insert using a matte black plastic, such as matte…
Required additional components: 2× DS-S007M 21g servo (or similar, dimensions shown in the image) 2× 623zz bearings 10× M3 × 20 mm screws 12× M1.7 × 4 mm screws (similar-sized self-tapping screws can be used) 2× M3 × 6 mm screws 8× M3…
A model of the F9R test rocket Space X used to test vertical landing technology before building the Falcon 9 the model is simplified and designed to be scaled down and printed in a normal 3d printer
