Wyniki wyszukiwania: vx3

Volador VX3 VX3.5 DJI O4 (lite) camera mount

Set of TPU inserts to adapt Volador VX3/VX3.5 aluminum camera mount for DJI O4 camera.

Volador VX3/VX3.5 Walksnail WS-M181 front GPS mount

Print Settings Printer brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament material: TPU Filament brand: Kingroon

Flyfish Volador VX3 19mm analog FPV camera adapter

Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.

Volador vx3.5 sma antena mount

use the same conector thats on the tbs mambo sma kit power leads should feed trough the top

FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU

FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU. Found the original silicone ones are way to soft for a 19mm analogue camera. I couldn't find an STL online so i made one.

Volador VX3.5 1604 Motor Guards (plus .dwg file for the arms)

Just modelled these to help protect my VX3.5 motors since I often times would crash in a way that would bend the bell on motor. I have not yet fully tested this designs performance in the air so please keep that in mind. You will need a…

FlyfishRC Volador VX3.5 Antenna and GPS mount

Compact antenna and GPS mount for Volador VX3.5. The VTX antenna mount requires trimming down the plastic antenna tube to fit. Sized to fit the antennas from a dual antenna Walksnail VTX, but will also fit DJI O4 Pro antennas. Supports…

Radiomaster RP1 Receiver Mount for Volador VX3.5

A mount for the Radiomaster RP1 ELRS receiver for the Volador VX3.5 FPV drone. Fits on the underside or upperside of the frame. Hole diameter is 20mm. I used 6mm M2 screws for mounting, the 5mm M2 screws which came with the frame kit…

Viewsonic VESA Mount (vx3258-2kc-mhd)

Designed this for a friend to adapt his monitors (Viewsonic vx3258-2kc-mhd) to a VESA mount, this is 100x100 spacing. I printed them out of carbon fiber polycarbonate. You'll need M4 screws (maybe about 20mm?) and 4 M4 lock nuts to attach…

Volador VX3/VX3.5 Walksnail Moonlight Mount with Dual Antenna/Buzzer/XT30 Holder

Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…

Flyfish Volador VX3 VX3.5 lollipop DJI GPS antenna mount

For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…

Flyfish Volador VX3 Runcam Thumb Pro W Freestyle Mount

original design is by FabianP on Cults 3D

Volador vx35 front cam guard small

The small model is lighter but provides less protection, no TPU in view. The large model is heavier but provides more protection, slight TPU in view. Print laying flat on the side, infill density is up to you and your weight requirements.…

Volador vx35 TPU cam mount + bumper

This part is printed in tpu and replaces the standard aluminum mount that comes with the frame. It provides more protection for longer camera's such as WS moonlight by mounting the camera further back in the frame. Note: If you have a…

04 Pro FlyFishRC Volador VX3.5 Suite

adjustable 04 pro camera, dual antenna mount, and top GPS mount made with TPU

Knoflík pro Yaesu VX3

Náhradní knoflík pro Yaesu VX3 slisováno po vytištění. Materiál Pet-G

Flyfish Volador VX3-VX3.5 turtle fin (reversed) with battery connector

remixed from: https://www.thingiverse.com/thing:6523720 and https://www.thingiverse.com/thing:6928153

MX5 Miata 2DIN frame for Sony AVX300 headunit

This is a quick and frame to cover the gaps left around the tombstone with modern headunits. print it with supports and in PETG/ABS, mine is in PETG and is still there after one of the hottest summer in history. Keep in mind that mine is…

Volador VX3 3.5 custom TPU parts. Vifly Finder Mini + M10Q

https://www.reddit.com/r/fpv/s/R96kIWoKZZ

flyFishRC VX3.5 GPS

So, I already had regular M10 GPS and decided to attach it to tiny FlyFishRC VX3.5 drone. I'm not shure about that front tooth for covering antenna, just wanted to protect somehow and not to use too much plastic. But if you don't like it…

Volador vx35 dual antenna mount small

This is an update to my previous antenna mount for the vx35 frame, I've added pictures to show the weight comparison between this model and the old one. It was advised to position the antenna 90° from each other so here we are. Print at…

Volador vx35 vtx antenna mount

Goes on the last 2 standoffs towards the rear of the frame

Volador vx3.5 lolipop 4+ antena mount

Thanks to the original creator for posting STEP file, it always makes it much easier to remix. In my step file there is also simplified model of the lolipop if someone want to design around that. Can be printed at 45deg angle with no…

Volador VX3.5 BetaFPV ELRS Nano Holder

A simple mount for the BetaFPV ELRS Nano receiver designed for the Volador VX3.5 frame. The included 3D-printed receiver mount was too tight for the receiver, so I made this slightly more spacious alternative for an easier fit and…

Volador VX3 VX3.5 O4 Pro camera guard

no camera guard in view for up to 15° camera angle support propeller size up to 3.6" other camera guards can be added later for more agressive angles (> 15°). Printed in TPU (30% infill density, cubic infill pattern). I glued printed…

Osmo Nano Fpv Mount for VX3.5

20Deg Osmo Nano hard mount for Volador Vx3.5, holds TBS ND filters in the front.

TX800 Mount 20mm x 20mm m2 eg volador vx35

A simple adapter mount for the SpeedyBee TX800 VTX on frames with a 20x20mm M2 mounting pattern, such as the Flyfish Volador VX35. The problem it solves: The TX800 has 20x20mm M3 mounting holes, but many small frames like the Volador VX35…

Arm-Guard FlyFish Volador VX3/VX3,5

vmax charging port cover for VX5, VX2 Extreme, VX2/VX3/VX5 Pro

in the picture, i used the settings: 0.4mm nozzle 0.2mm layer height wall loops: 2 material: BambuLab TPU 95A HF with the 95A profile (instead of the 95A HF profile)

Volador VX3.5 - O4 Pro Spacer

I had some clearance issues with my DJI O4 Pro due to the battery cable routing, so I designed these spacers to create additional room underneath the unit. The DJI O4 Pro sits slightly higher, allowing battery cables and other wiring to…

20mm antenna mount for Volador VX3.5

Antenna mount for FrSky R-XSR thats fits the Volador VX3.5 frame. Designed to work with the following receiver mount: Printed in 0.15mm TPU on Prusa MK4S

Volador VX3.5 Rear GPS Mount with Antenna Holders

A rear-mounted GPS holder designed specifically for the Volador VX3.5. The mount is designed to securely hold the FlyFishRC M10 GPS and other GPS modules with similar dimensions. It also includes integrated ELRS & VTX antenna holders,…

Volador Vx35 Sideplates

A pair of sideplates i made for my Volador Vx35. this way the props can not fling dirt and moist in the frame.

Flyfish Volador VX3 Runcam Thumb Pro W Freestyle Mount

original design is by FabianP on Cults 3D

Flyfish Volador VX3 19mm analog FPV camera adapter

Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.

flyFishRC VX3.5 GPS

So, I already had regular M10 GPS and decided to attach it to tiny FlyFishRC VX3.5 drone. I'm not shure about that front tooth for covering antenna, just wanted to protect somehow and not to use too much plastic. But if you don't like it…

Volador VX3/VX3.5 Walksnail Moonlight Mount with Dual Antenna/Buzzer/XT30 Holder

Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…

Side Covers for FlyFishRC Volador VX3 / VX3.5

Side covers to protect FC/ESC, included option of opening and plug for FC USB-C Port.

Flyfish Volador VX3 VX3.5 lollipop DJI GPS antenna mount

For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…

Volador VX3.5 / 3 Lighter Motor Guards

Took @Zelas_422011 's great design and reduced the weight by booling

Side Covers for FlyFishRC Volador VX3 / VX3.5

Side covers to protect FC/ESC, included option of opening and plug for FC USB-C Port.

Volador VX3.5 / 3 Lighter Motor Guards

Took @Zelas_422011 's great design and reduced the weight by booling