183 modeli
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
Waffle pattern handle secured with M4 screw and nut. Print Settings: Material: PLA, PETG Nozzle: 0.4mm Layer height: 0.30mm Supports: no Perimeters: 2 Infill: 10% My Other Handles: https://www.printables.com/@BaGooN/collections/1174222
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
Contest Entry for MasterLiquid ATMOS Customization. Features a Waffle Maker. This design can be printed all at once (with minimal supports), and features a working hinge. After all these years, you can finally make waffles from the heat…
Wydruk około 4,64 €–5,67 € nettoWstępna wycena jednego wariantu
Here's an easy to print play-dough toy waffle maker press that makes heart shaped waffles. These play waffles are suitable for use in the toy waffle iron that you can find elsewhere on printables. Children love pushing down on the top…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prints without supports. Make sure to print it upright on the narrow straight end; print files provided that demonstrate how. Recommend 0.2mm layer.
Wydruk około 2,28 €–2,78 € nettoWstępna wycena jednego wariantu
Toy Heart Waffle Iron – Fun for Little Kitchen Chefs! Bring real kitchen vibes into the playroom – no electricity needed, just lots of imagination! This lovingly designed 3D-printed toy waffle iron comes with matching heart-shaped waffles…
Dies ist ein Waffen Ständer für mein Airsoft Gewehr. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Das Magazin ist völlig neu designed, inspiriert habe ich mich von den Magpull und ETS Magazinen. Zum verbinden des Magazins…
Make sure you have a clean build plate before printing. 0.2mm layer 2 walls 15% infill You can always try other things if its not working
The bottom in the original pot can be a little flimsy, being only 1mm thick. It gets even thinner when you scale the model down, so in this version I made it roughly two times thicker. Otherwise it is identical to the original.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
An assemble-after-print model of the Morf Worm: https://wonderworkstoys.com/products/morf-worm The model is assembled as follows: 4, 6, 7, 8 (U), 8 (Box), 9, and back 9-1, both top to bottom and right to left, to make a crisscross shape…
Original Design by Erlbeck https://www.printables.com/social/273939-erlbeck/about Decided to print with a .8 nozzle at .6 layer height in PETG. Looks alright to me.
In celebration of ZombieHedgehog's birthday, I designed this waffle. He at waffles on stream to celebrate and I only thought it fitting to design something to go along with the theme! This floppy design is a little different from my other…
This is a model of the tank G98_Waffentrager_E100. maybe you ned to scale it up Print Settings Printer Brand: RepRap Printer: Prusa i3 Supports: Yes Resolution: 0.1 Infill: 30% Category: Vehicles
On our search for the legendary but elusive Perfect Belgian Waffle, this coaster was created! Designed using Autodesk Fusion 360. Print with wood or beige-coloured PLA filament for extra realism. Enjoy, but don't crack your teeth!
Description: The SC 50 was a small, general-purpose bomb used by the Luftwaffe in World War II. The bombs were carried by fighter-bombers and bombers, and came in several variants that weighed between 48–55 kg. They could be equipped with…
Geometric Vase designed to print in vasemode not watertight Dimensions 150mm x 70mm
This cutting plate is based on similar waffle cutting boards on the market. You will be limited based on the size you are able to print due to your printer. The squares likely are not conforming to the add-on gadgets that other plates may…
This is a magnetic Mickey Waffle Ear, that is meant to be interchangeable with others in the series. Settings that I printed at: Prusa MK4 0.15 SPEED 15% Infill I used Overture Silk Copper PLA for this, which looks great; however, I would…
3 types of waffles, All you need is magnet of this size: 5x2mm and a bit of superglue. I used Prusa Printer i3MK3S, 0.20mm quality, 5%, PLA
This model is in 15x15 mm scale, made for dollhouses. Includes 2 files for top and bottom parts.
This is two turtlebot3 (Burger and Waffle) waffle plates able to be printed together. The 3mf file is included because it can be difficult to print well. Support enforcers are used. Printed in PLA .3mm layers.
Dies ist ein Waffen Ständer für mein Airsoft Pistole. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Ich habe es mit einer Tokyo Marui Hi-Capa getestet. Es scheint, dass es auch mit anderen Hi-Capa oder 1911 Modellen…
The V2 ( German : Vergeltungswaffe 2 , lit. 'Retaliation Weapon 2'), with the technical name Aggregat 4 ( A4 ), was the world's first long-range [4] guided ballistic missile . The missile, powered by a liquid-propellant rocket engine, was…
Jigs for helping solder stained glass pieces at specific angles. Print two of each angle, then you lay your glass in them and solder! These are made specifically to be used with the waffle grid mat systems, they have little pegs on the…
A 1:64 scale model of a Waffle House inspired building. Best for playing with hotwheels toy and other 64 scale model toy cars. All stl components are separated by color. Glue is recommended with assembly.
Print in a matte yellow-brown for realism or in your favorite color. Green waffles anyone?
A model of RhB Waffentrager Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: Doesn't Matter Infill: 20% Category: Vehicles
This design allows you to hold an A1 Lidar from RPLidar to the Turtlebot3 waffle plate. The waffle plate is a module robot base platform used in the open source Turtlebot3. The attached 3mf file includes my selection of variable layer…
My boys love waffles and recently got a pretend toaster for their kitchen play area but didn't have any waffles that would fit Feel free to remix https://a360.co/2PkVJ9s Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
Simple waffle cone ice cream Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .1 Infill: 20% Filament: Creality PLA White Category: Food & Drink
Everyone loves waffles! Print Settings Printer: Prusa Mini Supports: No Category: Jewelry
This 120x120mm Waffle fidget toy is foldable, floppy, and full of fun! Enjoy!
Easy to print, no supports, any material are fine. Suitable for succulents, orchids and all other plants. Optional drain holes Optional Saucer Optional inner wall - make a planter for orchids or where the plants come out the sides. This…
Original Waffle pattern pot with increased facets count to avoid artifact on base. My goal was to these artifacts on original model. After : All credits go to the original author, specially for sharing scad file.
Fun waffle pendant design for making your own jewelry! Quick and easy to print.
CZ 515 22LR - 15 round magazine - Waffle Mag! Fully DIY 15 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus…
My wife needs some Waffle Cones for her Instagram, so I modeled this in Fusion 360 using Coils. The Angle of the Coils is 15° and the original size of the cone is 50mm x 150mm. She needs them to be shorter, which is why I'm including a…
Made for Saitek PRO rudder pedals. The standard pedals are to small and the angle dont fit a real simmers gamesetup. V1: For those who fly from an officechair, i pedals which just bolt on to the Saitek PRO, to get the bigger pedals and…
Bring a little 80s nostalgia to your drinks with this Eggo waffle-inspired coaster featuring classic “Stranger Things” lettering! This coaster is designed with a waffle grid texture and a bold logo-style text detail that makes it perfect…
Just added a drain hole for water
A 50 gram 10x10x1.5 cm waffle with 36 holes. Takes 3 hours to print on ender 3. Print settings no supports
I wanted to make my own threads in tinkercad and they worked pretty good. A friend gave me the idea for a waffle container, so I found a waffle and made it into a container(jar?).
Morph Waffle Fidget (Small!)
Made for Saitek PRO rudder pedals. The standard pedals are to small and the angle dont fit a real simmers gamesetup. Angle is raised 15 degrees, but im about to increase that to 20. For those who fly from an officechair, there will be…
When my kids were younger they loved to play with Waffle Blocks, usually taking up much of the living room. I recreated the experience in miniature as a desk or coffee table size toy. I recommend the "Tiny Surprise Egg" models printed at…
A coaster that look like a waffle. It fits with my last model from Plant Pot contest. Enjoy.
Adjust the printing size for glasses. Its a bit small.
An extended height version of a waffle plant pot. It looks like it could have been an apple plant pot and looks very nice on your desk. Category: 3D Printing
I just combined the two waffle halves for quicker and easier printing and to save the gluing step. Works great. And thanks to Da_Rius for such an amazing model.
/!\“This model contains a historical Wehrmacht symbol.”
I always had trouble putting everything away after making an ice cream cone while holding the cone, so I designed my own holder that is printed in vase mode.
I printed it without support (ribs are not visible) ;-) Note: If you like this model (which is not behind a paywall) you can buy me a coffee.
Celebrate love and breakfast with this adorable heart-shaped waffle keychain. My wife loves waffles, and I love her… need I say more? The perfect gift for foodies, waffle enthusiasts, or anyone who wants a sweet touch for their keys. This…
Waffle Stamp/Embosser for baking
A Waffle Iron and waffle for a pretend play kitchen- the waffle is included in the 3MF file. You will need to use a segment of 1.75mm filament to act as a pin in the irons hinge. I added a touch of glue to the openings of the pin hole in…
a waffle dart tip compatible with nerf darts, would recommend to print in TPU
I spent a few hours modeling these because I thought it would be pretty funny. They actually work pretty well though. There are two sizes. one is square and larger to fit square bars of soap similar to Dr. Squatch, and one is smaller and…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Wafflestackarack, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
I call it the waffle adapter. I recommend ABS or ASA to print it from. It's still a work in progress but installed on my CR10V3 and running well now. Requires: 6 brass Heatset Inserts (as used on Voron builds); m3 x 5mm OD x 4mm length. 4…
Clicky waffle remixed from Super Clicky Oreo Spinner and a design by another creator
The hinge pegs eventually broke on my WMB500 BLACK+DECKER Belgian Waffle Maker so I designed new ones in Fusion 360. I've tried other 3D models of hinge pegs but they weren't sized correctly and broke on installation. These snap in and…
85mm across. Please print on it's face with no supports. I have already oriented it this way.
This is a cover/lid for a Ninja Belgian Waffle Maker Pro . I got one of these as a gift. The vertical design makes it very easy to make waffles, but since I store mine out on the counter, it also means things can fall into the waffle…
Waffle cone themed soda can sleeve (koozie). Includes 2 versions; Flat ice cream drips and sculpted drips. .3mf files of assembled parts, ready to paint .stl files of individual parts. Note: The sculpted drips do not have a flat surface…
Anyone else frustrated by the complexity of the Turtlebot waffle plates? I was, and wasn't able to find any alternative, so here's mine. I made a couple of variations, including a couple of doubled-up variants. Note the original model had…
A mostly perfect copy of the original cleaning and lubricant accessories for Swiss Military Riffle.
Waffel Verkaufs Anhänger Bausatz in 1:43
A life-size, realistic waffle iron – designed just like the real thing! This 3D model was carefully created based on classic 5-heart waffle irons, including all key details. The proportions match real appliances – only this one is…
Print 2 perimeters, 0.2mm layer height, 6 top & bottom layers. Infill 10% or none (check preview.
It can store up to 6 pair of panels. Project link: https://cad.onshape.com/documents/3342b2b3d1ff93c6037e06d9/w/df8e8222e45ecb02c2ed9714/e/d4c59eeb4e44bbda694f6631 printed with no supports with PETG Category: Kitchen & Dining
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN . This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
This is a dog tag for Waffles the dog. He is a golden retriever. Overall a good boy. The multicolour pauses to change filament are in the gcode, however, I think it might turn out even better if you try ironing. Regardless, it's a pretty…
This is a Sign, printed by manual color exchange (Prusa Slicer). Three Colors: White, Black, Red. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm (or your choice) Infill: 25% (or your choice)…
After printing, it is worth sanding the blocks
After printing the Luftwaffe style pedals from Svejseko https://www.thingiverse.com/thing:2739648 i felt that the hole at top end bothered me so i made a little addon to fix it. Print two of each part and glue the barrel to the plate with…
After I printed the Pepper Grinder Funnel, I couldn't wait to add additional parts. This PePPeR WaFFle tray provides a clean resting place and place-holder for your beloved, large and messy Pepper Mill. A must have for those of us who…
Made in Dune3D, so can't drop you a source file in models. It's in .zip, in additional files.
Eishalter für Eisformen oder echte Eiswaffeln. Es sind allerdings stützen erforderlich. ° Druckzeit: 3,5H ° 0,28mm layer höhe ° 10% Infill
I decided to design a waffle bowl maker instead of purchasing one off the internet, and because I didn't want to have to improvise with a cup or something similar. You can use any food safe filament like PLA or PETG. Whip up your favorite…
PKW-Halterung für Langwaffen - Montage Nackenstütze 110 und 150mm Ø14 Repetierer Ø18 / Krieghoff Drilling Plus: 2x Cal 12 / 1x Cal 7x65 Allgemein: 2x Kniehebel Spanner für Gummi-Schnur - Variable Klemmung: der Gummi-Schnur ( mit Inhex…
A soap dish in the shape of a waffle fry. The center of the fry is bowl-shaped, so the soap stays in place. Print with a brim or it will be extra bowl shaped. Want to support me? I make and sell these. Check it out here:…
Pot with waffle pattern. design is made to appear floating as the tips don't hit the bottom surface. It requires supports to get started but after that it's an easy print. There are 2 additional versions with a flat top so you can print…
A bunch of my 3d printing friends live in or around the Netherlands, and stroopwafels are quite popular among many of the 3d printing folk I know, so I decided to make a special crossover model for giggles :D Both of the model files are…
-Halter für Walther PPQ Ram Waffe
Supports for the tail and face recommended
This inlay for Waffletime keeps the cards on the one side and the meeples on the other side, forming a frame to keep the player boards in place. The topping and game tokens are stored in waffle boxes. For the base game I printed: 1x Card…
This model allows you to mount a Turtlebot3 waffle plate on your WaveShare Jetbot robot. This then allows for the mounting of additional sensors includeing lidar, imus etc. Designed to print without the need for support. Source:…
Straight road for Little Tykes Waffle Blocks, one block length. Connects to original parts snugly, but is a little loose when connected to other printed sections. One part is the length of one waffle block, not a half length of road. I…
Toy waffle iron, great for use with kids kitchens and Play-Doh type materials. Print the top, bottom, and 2 of the insides. The insides snap into the top and bottom without much trouble but can be glued in also if needed. Recommend a slow…
Look out! It's the Luftwaffle! My username is a pun about waffles and the German air force (Luftwaffe), figured I should bring that to life! This is a model of the German BF109 fighter, with a silly waffle texture added. The seams of the…
