98 modeli
Support pour positionner un Dell Latitude 5300 verticalement sur une station d'accueil Dell WD19 ou WD19TB. Fonctionne aussi avec les Latitude 5400, 5401, 5410 (tous ceux de 21 mm d'épaisseur). Print instructions Impression en PLA, à…
Wydruk około 11,57 €–14,14 € nettoWstępna wycena jednego wariantu
Dell WD19TB TB3 dock with 120mm Fan Design Goal This is an updated version of my WD-15 USB-C dock ( https://www.thingiverse.com/thing:4335172 ). I picked up a WD19TB to address some other upgrades I made, and decided to take another stab…
Wydruk około 15,15 €–18,52 € nettoWstępna wycena jednego wariantu
Special thanks for CWempe for modelling the docking station itself. Link to their version of the bracket Under table cradle for Dell WD15 docking station - we needed a way to stick it near the cable opening in the meeting room so that the…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
This is a mounting bracket for the Dell WD19 dock. Hardware: 2x M2.5x10 socket head screws (The length is CRUCIAL! Longer screws might destroy PCB traces and kill your dock) 2x 4mm countersunk wood screw
We have these Dell WD19 USB docks at work and very small desks. I designed this to move the docking station to the underside of the desk to save space and remove the cluttered appearance of the cables. These and the Caldigit TS3+ version…
Mount for Dell WD19 power supply and similar ones.
A mount to place your Dell WD19 docking station out of sight under your desk. Easily put on or taken off with just a twist. Simply align the nobs to the holes of the mountplate, push it in and twist the docking station in place. The nobs…
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M2.5 mouting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.8x13 pan head screws). Printing…
This model is specifically for the DELL WD19, WD22, K20A USB-C Thunderbolt Docking Stations (all have the same 9cm deep x 2.9cm height case) and allows the dock to be clamped to the edge of a desk and hide all the associated cables. I…
Designed a mount to hold a WD19TBS dock to the bottom of a desk. It is designed to slide in from the back with a clip built in to add friction to hold it in place. Additionally, there is a similar mount for the power supply (PSU). The…
This is a cover for the Dell WD19 Dock USB-C cables - Sometimes we have the plastic covers break off. Although the cables then work fine, people don't like to use the cables with “exposed” ends. As Dell classes these as "user damage",…
This model allows you to hide your Dell Dock under the table to create a clean workspace. I designed it for Dell WD19DCS but it should fit any similar Docking Station with 90mm depth and 29mm height. It is not flush with the table, in…
If you have a Dell laptop with a USB-C Dock connector you need this! These connectors are flimsy - putting things around or near the cable that rest on them and put any downward pressure will bend it down and eventually destroy the USB-C…
If you have a Dell laptop with a USB-C Dock connector you need this! These connectors are flimsy - putting things around or near the cable that rest on them and put any downward pressure will bend it down and eventually destroy the USB-C…
Mounts between DELL monitor stand or VESA compatible holder Requires new bolts Print instructions PLA or similar stiffness 100% infill 3 perimeters 0.2-0.3 layer height 0.6 nozzle
At first I just wanted to change the height of the original model to fit my Latitude 7490. After printing small slice of model to test fit, I realized that's all you need. It prints below 10min and uses ~30cm of filament. Tested with…
I added countersunk holes for the VESA mounting screws. Also a 10mm 2.5M screw are needed for mounting the dock.
Remix of the Dell WD19 Dock for the Modular TableClip System to keep your dock on the side of the table. You need 2x M2.5x10 screws to mount it to the dock.
Mounting bracket for the Dell WD19 and WD22 docks. BOM: 2x M2.5x8mm socket head screws 2x 8G button head stitching screw, minimum length 15mm NOTE: The original used M2.5x10mm socket head screws, but I had some 8mm ones and they worked…
About This design allows you to mount a Dell docking station (WD15, WD19 or WD22) to a Dell P3421W monitor. You can either use no additional hardware or the official Dell Docking Station Mounting Kit to do so. BOM (Always) For the…
Other mounting solutions I found did not fit mine. Probably Dell changes dimensions frequently. Better measure dimensions of your docking station before printing this. 😉
I added a better access to the power button.
This model allows you to place your notebook on top of the docking station. Fits perfectly on the Dell K20A, maybe other. All ports are available and the air vents of the docking station as well as of the notebook are completely free. The…
A clip to mount the Dell WD15 laptop dock to the underside of the desk for cleaner cable management.
Model for the dock can be found here: Dell WD19 Docking Station STEP The dock can be mounted in any orientation. Be careful, the holder halves are mirrored and you cannot simply 3D print the same file twice. Credit: docking station Dell…
Dell WD19 USB-C Cable Gaurd Protector for the docking station. It fits well and isn't too tight to damage the cable. I posted this on my Maker World account as well: Dell WD19 Dock USB-C Cable Gaurd
This is a remix of this file: Mount for Dell WD15 docking station (upside down) by CWempe - Thingiverse Use two M2.5 Screws to fix the adapter to the dockingstation. Use two at maximum 4mm diameter screws to fix the adapter + dock to the…
This is an under-desk mount for the Dell WD19 dock. I didn't like any of the other models available so I designed my own in Fusion 360. The HDMI port is blocked, but all other ports including both the 2x display ports are all accessible.
This is an adapter to mount a Dell WD19 Dockingstation to a VESA Adapter. I used such a thing to mount it to the monitor…
This is an adapter that allows you to mount your Dell WD19 series (I use WD19TB) laptop dock onto the excellent Honeycomb storage wall system by RostaP. You just need two M2.5 x 12 mm screws for mounting the adapter on the dock. Could…
OnShape source: https://cad.onshape.com/documents/d7e86030572b435333e6eb01/w/3a33073424f9de48ffc5a7ec/e/f06d50deb0a5f89e806c2d42?renderMode=0&uiState=64e0b62e7949c81d65b75c98
Dell vesa docking station mount
I printed it from petg however pla should be fine. 10mm wood screws. I have the WD19S, however any dock other dell dock with the same dimensions should work. Print settings: 0.2mm Layer height 4 perimeters 15% infill 5 top & bottom layers…
Dell Dock stand for wd19 with side openings and better ventilation. Dont use silk pla like it did. Was a pain. Should not need any supports nor brims but with silk pla had to add them all and was a really big pain.
An under-desk power supply holder for the Dell ThunderboltDock WD19TBS.
Vesa Dock Printable with no additional parts. Vesa Dock - With Magnetic Cable Holder Requires screws and magnets. Part Where to buy Magnet 8X3MM * 2 - 7 https://www.aliexpress.com/item/1005001586934809.html 2M x 8mm Self Tapping Screws *…
Underdesk mount for dell docking WD15 Docking station. 90.50x30mm (wide and height). Designed to be held with countersink screws (3.5x25mm)
For some reasons i like it this way. Also ventilation holes at the bottom. Doesnt need supports but might work better with some supports. Check also the new version. https://www.printables.com/model/1098354-dell-dock-wd19-stand-v2
Print 2 of these clips to hold a Dell WD19 series docking station to a Skadis board.
Quick design to hold a Dell K17A WD15 under my desk. Designed to be support free, pieces are correctly positioned in the in the 3mf file. Holes in the models are for 3.5mm countersunk wood screws
Wall Mount for Dell docking station. Use 2.5M (10mm max) screws for docking station interface. Standard wood screws for wall. Mount to docking station orientation can be rotated 90deg
My girlfriend received a dell XPS 13 and a WD19TB dock from her job. The laptop is basically always tucked behind her monitor sitting on its box, connected to her monitors so i made this simple dock to keep both the laptop and the WD19TB…
Remix of Notebook stand for print on Prusa MINI. Inside the stand fits dock Dell WD15, on picture is Dell 7390. https://www.prusaprinters.org/cs/prints/14888-notebook-stand Print instructions Was printed with PETG, 0.25mm, with supports,…
This is a vertical stand for the DELL WD19 docking station. It helps to save a lot of space on the desk if you do not want to mount it underneath
## Print settings: Material: PETG - Layer height: 0.2 mm - Perimeters: 4 - Top/bottom layers: 10 Cuttings of transparent PETG can be inserted into the holes for the LEDs. Assembly does not require glue, but you can apply a little glue to…
A no-supports needed print to hold your docking station & laptop vertically. This is designed to perfectly fit the dell WD19TB thunderbolt 4 dock, keeping all I/O & air vents clear. It can also support a laptop that's at maximum 23mm…
Ikea Skadis mount for WD19 / WD19S docking station. Despite the minimalistic design it holds a docking station pretty well: All ports are accessible Ventilation not blocked Docking station is stable after placing into Skardis plate When…
This stand holds a Dell Thunderbolt dock (model WD19TBS) and a laptop. Notes Room for front USB cables attached to dock Cables can be routed through stand Does not block airflow Leave laptop open to act as a second monitor Printing Does…
Designed to mount under the desk. is a very tight fit so if you need more height scale up the vertical dimension. Designed for the dock to only fit in one way, front of dock should face the side with the larger walls. print with supports,…
Stand for older Dell docking station WD15
I hated losing desktop real eastate to my Dell dock, so I created this bracket to mount it to the underside of my desk. There may be more elegant solutions out there, but this gets the job done. Everything fits snugly and is mounted…
FNIRSI SWD10 - STANDFNIRSI SWD10 - STAND
Repair your Dell WD15 / WD19 dock USB connector with this case. For good visual effect : Select good filament quality (Carbon Fiber for example) Print with concentric top fill pattern Use lowest resolution Gently remove supports Once…
Mount your Dell WD19DC dock to your opengrid wall!
I needed a smaller mount for the Dell WD15 docking station so I could print it on the Bambulab A1 Mini.
Remix of Original for Dell Precision 5560 + WD19TB Dock USB Plug Support
My dock was taking up space on my desk and managing cables was becomming a pain so I mounted it to the wall along with my Jabra Speaker. Printed with .2mm layers, 3 walls, 15% cubic infill in PLA on a BambuLab A1 Mini. 5mm Brim and tree…
Must print two to properly mount to surface, use screws to screw through mount and into the wall.
Assembly that screws into the Thunderbolt dock and can be clipped into a Signum cable channel. Allows for easy installation and removal + simple cable routing directly into the cable channel above. The part can be mounted in any…
This is a under-desk mounting bracket for the Dell WD15 USB-C dock . This model leaves a bit of space on the top for cable routing, and the power supply bracket has some hooks for additional help with cable management. It's a good idea to…
Simple under desk mount for Dell WD19TB Thunderbolt Docking Station.…
A dock holder for the Dell WD19TB and desktops up to 38mm (1.5"). Printed on a P1S using PLA (Polymaker Panchroma matte charcoal black). No supports needed, default setting with exception to the following. Wall loops: 4 Sparse infill…
Mount your Dell WD19 laptop dock securely to the IKEA Jerker desk frame. I based this on SirJoga's Thingiverse post (https://www.thingiverse.com/thing:4877019) though in the end I made it up from scratch with my own measurements as a base…
Print Settings .25mm first layer. .2mm layer height. 5 walls, 30% infill. I'd recommend PETG minimum. No supports required. Files & BOM This is designed for a 35D monitor tube, however I’ve included the F3D files for if you need to modify…
Dell Docking Station WD19S Under desk or wall mount
Use the four screws to attach mount to the table
My current project is to add an openGrid desk mounting system under my desk. To fix my DELL dock i remixed the nice fitting parts of 3Bdo with some Multiconnect snaps . Those snaps can be easily clicked into the Multiconnect snaps that…
Eakins WD105 320x zoom (my bought here https://pl.aliexpress.com/item/32703396905.html?spm=a2g0o.order_list.order_list_main.5.58a21c24ZYIUbd&gatewayAdapt=glo2pol) and Mechanic LS3 Led ring (my bought here…
This model is a desk edge mount for the Dell WD15 USB-C docking station . The dock slides into the holder and can be partially pulled out (~20 mm) to improve access to cables, while still remaining supported by the mount. It is intended…
Designed these simple slide on hooks to pull my Dell WD19 dock up off my desk and hang it on the little cubicle tray rack instead.
Karcher WD1 nozzle holders portal
The Dell WD19 Mount from EllingEG has to steep mounts for a typical 2,5x16 Screw (wich are typical used for power outlets in Germany, but are too long here) so I design an adapter to use these most common screw.
A holder for the Dell WD19 docking station USB-C plug. The holder is designed so that it stands on the desk supporting the plug when connected to a Dell Pro Max 14 laptop. The holder also makes sure that the USB-C plug sits more tightly…
You will need to use supports on the round part of the model. I recommend to print it laying on it's side for best stability during and after printing. The part that holds the casters in place for the upper rack in the GSD3200JWW…
Found this great WD19dc dock but my thunderbolt input was covered. Added a cutout for it.
our dock was getting quite hot when we was streaming over zoom, causing the USB camera we had to flicker, and a few other issues, as the dock was in an enclosed space we needed additional cooling. enjoy this remix, or go to the original…
Mount for Dell WD19 docking station. When printing, ensure to print base + 2 knobs :)
Shortened and added vent holes. Change the output port to be angled and rounded
Support for the DELL WD 15 docking station that is quick and easy to print. All it requires are 2 M,5, or M3 screws and a 3D-printed locking wedge. Features: Easy to print with just 2 parts and no supports required; The 3d printed part is…
FNIRSI SWD10 - ModelFNIRSI SWD10 - Model
This mount securely holds the power supply (power brick) of the Dell WD19TB Thunderbolt Docking Station under a desk, on a wall, or on furniture. The design is intentionally minimal to reduce print time and material usage while still…
The Design The standard Dell Docking stations sit flat on the desk. This often makes it awkward to plug in USB devices at the front, and stiff cables in the back tend to push the dock around on the desk. The solution was this angled dock…
This is a stand for the WD1209 temperature probe, although it likely fits others. I designed it for a resin printer. The holes you see in the attached image were done in the slicer to for resin flow improvement while printing and are not…
This is an update to the original model. My Dell Precision laptop from work would not fit in the slot meant for the laptop. It was too thick. So, I expanded that slot by 10mm to allow for larger laptops to work in this stand. It works…
The Etekcity ESWD16 is a nice dimmer, and made better by the use of custom firmware (which you can grab here: https://github.com/avwuff/esphome_eswd16 ) However, the front buttons on the device are terrible, requiring you to look at the…
A simple mount for the Dell WD15 docking station. In my case, I mount it on the unused second arm of my VESA monitor mount. I created this model in Blender and printed it in PETG.
Plastic usb-c cover on Dell WD15 brakes easily. Made a replacement which fits my wd15 version. Glue them together
Print 2 of these clips to hold a Dell WD19 series docking station to a Skadis board.
Repair your Dell WD15 / WD19 dock USB connector with this case. For good visual effect : Select good filament quality (Carbon Fiber for example) Print with concentric top fill pattern Use lowest resolution Gently remove supports Once…
The Design The standard Dell Docking stations sit flat on the desk. This often makes it awkward to plug in USB devices at the front, and stiff cables in the back tend to push the dock around on the desk. The solution was this angled dock…
Found this great WD19dc dock but my thunderbolt input was covered. Added a cutout for it.
This is a cover for the Dell WD19 Dock USB-C cables - Sometimes we have the plastic covers break off. Although the cables then work fine, people don't like to use the cables with “exposed” ends. As Dell classes these as "user damage",…
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M2.5 mouting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.8x13 pan head screws). Printing…
Dell WD19 USB-C Cable Gaurd Protector for the docking station. It fits well and isn't too tight to damage the cable. I posted this on my Maker World account as well: Dell WD19 Dock USB-C Cable Gaurd
Special thanks for CWempe for modelling the docking station itself. Link to their version of the bracket Under table cradle for Dell WD15 docking station - we needed a way to stick it near the cable opening in the meeting room so that the…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Support for the DELL WD 15 docking station that is quick and easy to print. All it requires are 2 M,5, or M3 screws and a 3D-printed locking wedge. Features: Easy to print with just 2 parts and no supports required; The 3d printed part is…
