Liczymy pasujące modele…
This model is specifically for the DELL WD19, WD22, K20A USB-C Thunderbolt Docking Stations (all have the same 9cm deep x 2.9cm height case) and allows the dock to be clamped to the edge of a desk and hide all the associated cables. I…
I made two types of connectors, which work with Karcher vacuum cleaners - WD2, WD3, WD4 familly etc : for 40mm spiral pipe - with “left” thread - with “right” tread for 50mm pipe: - straight simple version (for non-spiral pipes) - blank…
I added countersunk holes for the VESA mounting screws. Also a 10mm 2.5M screw are needed for mounting the dock.
Made for bolts, as you probably won't find clips anymore. Mirror for left / right orientation. Barely fits on an Ender 3, but you can make it work. ;)
Mounting bracket for the Dell WD19 and WD22 docks. BOM: 2x M2.5x8mm socket head screws 2x 8G button head stitching screw, minimum length 15mm NOTE: The original used M2.5x10mm socket head screws, but I had some 8mm ones and they worked…
This is simple and durable adapter for connection between Karcher WD2 (maybe other model) and Makita DBO180 model. Fit is tight to prevent falling off while you are generating some work. No support 0,2 layer Nozzle temp 210 Thanks and BR
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M4 mounting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.5x10 screws). Printing Both parts…
About This design allows you to mount a Dell docking station (WD15, WD19 or WD22) to a Dell P3421W monitor. You can either use no additional hardware or the official Dell Docking Station Mounting Kit to do so. BOM (Always) For the…
This model allows you to place your notebook on top of the docking station. Fits perfectly on the Dell K20A, maybe other. All ports are available and the air vents of the docking station as well as of the notebook are completely free. The…
Description I was looking to hide my Dell Pro Dock under the table to reduce clutter and create a cleaner workspace. It was designed for Dell Pro Dock family (WD25, SD25 and variables) with the goal of preserving air circulation, access…
Overview This is a custom-fit mounting rack designed specifically for the Dell WD25 Pro Dock . The design is optimized for vertical printing and doesn't required any support. To limit wrapping during the print, I added a slot on the back…
Under desk or wall mount for a Dell WD25TB4 dock. 2x M4 x 10 socket head cap screws to attach dock to mount 3x M4 flat head screws to attach mount to desk or wall Don't use too long of a screw to attach the mount to the dock, or you could…
Vacuum adapter from Karcher WD2 (may work with other WD) to Bosch Jigsaw GST680 model. Quite tight fit, so you will be able to do work without disconnection. Ender3 V3 SE Layer 0,2 No support No raft Nozzle temp. 210 Material PLA
Mount your Dell WD22 docking station to your monitor stand.
Spare cap for Parkside vacuum cleaner PWD25 A2. Cap is ready to use, no seal needed. Three version included. Basic cap - zatka PKS.stl Cap with 3/4 thread - zatka PKS 3-4.stl Cap with 1/2 thread - zatka PKS 1-2.stl Feel free to remix it!
A friend was facing replacing a whole Navico Wind Direction and Speed system on his 30 year old sailboat because he was unable to find a replacement wind cup. So I reverse engineered the hub, cap, and cups for the Navico System 200 WD200.…
Držák adaptéru pro dokovací stanici Dell WD15, WD19, WD22
Deutsch Dieses praktische Dock-Design bietet zwei Versionen für maximale Flexibilität und optimierte Nutzung: Version 1 (Kabelausgang unten) : Perfekt für die Nutzung, wenn das Notebook direkt auf dem Tisch steht. Das Kabel wird unten aus…
This is a snug-fit vacuum adapter that connects a 35 mm Kärcher hose (tested with Kärcher KWD2) to the Bosch UniversalSander 18V-10. It is a remix of the Dyson DC19 adapter by lord_henry , adapted to fit 35 mm Kärcher hoses. The original…
Printed using Prusa PETG and mounted using Rutex M4 inserts Attached to the mount using M12 Bolt ( https://makerworld.com/en/models/398454-fully-printable-knurled-screws-m12?from=search#profileId-299972 )
Bike seat tube mount for rear light Star Union WD220-2.
This is a simple mounting bracket for a Dell USB C dock. It can be mounted with screws using the holes in the bracket, or with double sided gel tape if you are like me and can not put holes in your walls. Check out this design on OnShape
This replaces the power button on our Splendide 2100XC washing maching, but may work for other Splendide models as well. Print Settings Printer Brand: Creality Printer: LD-001 Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 25%…
Case upgrade for old remote car lock wd267 like a keychain. creating from 2 parts
Adapter Zelmer Meteor 2 to Karcher WD2
This is a brushroll cover model that fits a Shark HydroVac WD201. It should also fit the WD100 WD101 WD200 as they seem to be the same part but I have not tested them. This was a quick and dirty print I was mostly focused on quickly…
I recommend printing this out of TPU and using the support enforcer included in the 3MF. 100% infill recommended
replaced this missing piece , its harder to install but its better than original imo , print with tpu
my avatar I will make more in the future and it might look a little weird, but it is just a Roblox Caracter
This is an update to the original model. My Dell Precision laptop from work would not fit in the slot meant for the laptop. It was too thick. So, I expanded that slot by 10mm to allow for larger laptops to work in this stand. It works…
Kärcher WD2 Plus Blasdüse / Pustedüse (PC- & Werkbank-Reinigung) Ich brauchte für meinen Kärcher WD2 Plus eine vernünftige Reduzierdüse, um Staub aus PC-Gehäusen, Lüftern und Filtern zu blasen, ohne dass mir gleich der Saugermotor wegen…
I did not have the right bolts on hand to use Ascardia's method, but I did have an abundance of M3 bolts and nuts. This is designed to bolt onto Ascardia's option 2 version. I have used Ascardia's version multiple times in the past, but…
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M4 mounting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.5x10 screws). Printing Both parts…
