Liczymy pasujące modele…
To use, print both the left and right halves of either the “Low Profile” or the “Flared" versions. Both of these use the internals from the included X-Shot half length adapter, and both will require some cutting of the adapters…
Wheel wells for FCX 18 - you'll need to perform a cut in the slicer and orient the flat parts to the build plate. Shock Keys, Rear keys are in 2 parts to make it easier to print. Front Shock keys I got lazy, just print the side with the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Please share the link back to this thing when you share your builds! Its part of the attribution license I shared this under, Thank You! Side skirts fit on a cr-10 size bed, wheel arches fit on smaller printers. Split skirts coming soon…
I wanted the windowed magwell made by Palmtopper but their posted files were unfortunately for an older version of the SLAB and are no longer compatible with the latest version of this blaster. In their absence, I took it upon myself to…
MAGWELLS FOUND HERE: https://www.printables.com/model/512021-xshot-longshot-half-dart-magwells I apparently LARPed too hard when reloading my Lonxshot with RedCowl's more flush magwell installed, and managed to shear off both hard-stops…
🇺🇸 Welcome to Denver, the Mile High City! MiniWorld3D's founder Dany Sánchez lived in Denver for some time and created several models representing landmarks of the city. The Wells Fargo Center is a high-rise building shaped like a cash…
96 Wells plate for either decoration or the measurements. Measurements are according to standard.
Rear wheel well fully redesigned from new sketches to match side skirt mounting holes on original design. More strength, and allows more room fore and aft of the tire to prevent rubbing. Front deflector includes additional mounting point…
Heatset inserts (M3 thread, 4mm length, 4.5mm outer diameter, 3.9mm nub)https://www.aliexpress.us/item/3256805034317562.html M3x10mm button head screw See original model for printing instructions. You probably want extra walls so there's…
Narrower wheel wells and lower rear shock keys for V2 body. You will have to reroute the wiring for the rear lights. The rock sliders are from here: https://www.thingiverse.com/thing:7247724 Edit: I updated the rear shock keys with the…
2 sizes: 96 well and 120 well. Arranged in rows of 8 spaced 9mm apart to allow for multi-channel pipetting with some common brands of pipettes. Bottom of each well tapers to a point to help tubes sit upright. Both sizes are available with…
J.R. Wells steamboat, a sternwheeler Built: 1897 in Tuscumbia, Missouri Dimensions: 110.6 feet long by 20 feet wide Cargo: Wheat, flour, livestock, lumber, and barites Sunk by ice floes at Pelican Bend near St. Charles, Missouri, on…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
3 sizes: 40 well, 60 well, and 80 well. Bottom of each well tapers to a point to help tubes sit upright. All sizes are available with and without handles. Print with 15% infill and supports if printing handles. Dimensions (mm): 80 well:…
This is a replacement tab for the door holder design on some older Wells Cargo and Haulmark trailers. Printed with Prusa PC Blend. Design file included so users can tweak the length they might need. Please share your Make:)
Hint: Assemble case and lid with a piece of 1.75mm filament.
Print orientation like katobu mags. Front and Back on their respective front-/backface. A foamblast style drum spring is recommended though a magazine spring sized for half lengths should work aswell. Highly suggest printing the back…
Pin is a piece of filament Needs a bungee or spring for the paddle Modified from the vikinger design for the 1.0 magazines.
This is a stand for your inkwells and pens. In the middle — place for nib cleaner or post-it papers. Great for everyday writing. I've also modeled a mod, which adds horizontal pen rack to it , like this: Inkwells on the photo are: No…
I was tired of the inappropriate well spacing of 10-well combs, which are unusable with multichannel pipettes. I was also fed up with the 16-well combs, which you can fill with a multi-channel pipette, but when you put two 8-well strips…
Herbert George Wells – Buste Description (Français) Ce buste représente Herbert George Wells , figure majeure de la littérature et pionnier de la science-fiction moderne. Inspiré de la photographie la plus populaire de l’écrivain, ce…
Cups to hold the player components inside the insert that comes with the game. My big fingers had trouble getting the components out without spilling them everywhere. After I made these, I found that other people had done the same, but I…
My tattoo artist wanted Ink Wells that were not the standard round plastic caps. I made these with different numbers of wells, as well as different shapes.
Button Wells with drill hole guide for Gameboy Color Zero project. This is a remix of the Original Gameboy Zero button wells. Instructions: Super glue in position the button wells by resting against existing A-B button wells. Red lines…
This is a small paint palette with 25 deep wells, useful for thin paints and small paintings that need lots of different colors mixed. I use this with liquid acrylics, but it would work well with slightly thicker paint too, like that for…
A dual well for painting allows a dirty water well and a clean water well. Includes a drip gutter around the base to catch as drip from wiping the brush across the rim Print Settings Printer Brand: Anycubic Printer: Photon Mono X 6Ks…
These files are meant to be a drop-in replacement for the magwell in the Nerf Motoblitz. The file list consists of: A replacement magwell (If you somehow lost it). A flared magwell with the back panel removed to fit older Nerf magazines…
These Flared Magwells Development Kit are CAD-ready models of short dart mag-compatible flared magwells that can be quickly adapted and customized to other blasters or mod parts. The model isn't a usable flared magwell without…
Wells for player pieces and resources to fit in the collector box. I had a hard time pulling these pieces out of the insert with my big fingers. Player resources - because the marble resource is so much bigger, I labeled the biggest well…
XY Button Wells for Gameboy Pocket Category: 3D Printing
A simple tray with useful wells to store a variety of items. Well sizes: Small = 25 mm diameter wells Medium = 30 mm diameter wells (coming soon) Large = 35 mm diameter wells (coming soon) Original: Height = 23 mm. (Well bases as 2 mm…
Riverboat Insert (compatible with 3D replacement components) While upgrading my copy of Riverboat , I came across some great community models and decided to design an insert around them so everything fits neatly into the box. This insert…
Multiple wells petri dish size holding chamber for patch clamp experiment. Allow separation of sections in individual wells for curing in bubbling artificial cerebrospinal fluid (during biocytin spread for example). Also ideal for cell…
An extended pusher for the long dart magwell, to pusher short darts from the Worker Honeycomb short dart mags - I had mixed success with it, but my gryphons trigger / pusher linkage was never very good
A desk palette for painting miniatures, models or watercolours: twelve shallow mixing wells, a long mixing tray, a holder for a water pot or small jar, and grooves that keep wet brushes off the desk. DETAILS • 204 x 86 x 9 mm; 18 mm wells…
Took the original blank added my logo homebrew name and then beer style Original By @Dannar_273865 Customizable Beer Tap Handle with Swappable Plates
Custom-fit top tray for the Zuriga espresso machine (E2 / E2-S). Matches the machine's rounded front corners and holds your tamper and spare filter basket in dedicated recessed wells, so nothing slides around on top of the machine.
Made this for my home bar and my homebrew fest portable bar. Feel free to remove my label's and logo and add your own. Add it to remix so i can see it! Happy printing
Multiple wells petri dish size holding chamber for patch clamp experiment. Allow separation of sections in individual wells for curing in bubbling artificial cerebrospinal fluid (during biocytin spread for example). Also ideal for cell…
Took the original blank added my logo homebrew name and then beer style Original By @Dannar_273865 Customizable Beer Tap Handle with Swappable Plates
Made this for my home bar and my homebrew fest portable bar. Feel free to remove my label's and logo and add your own. Add it to remix so i can see it! Happy printing
Hint: Assemble case and lid with a piece of 1.75mm filament.
2 sizes: 60 well and 72 well. The wells are 8.3mm in diameter. I included a test fit file to see if your tubes will fit first. Bottom of each well tapers to a point to help tubes sit upright. Both sizes are available with and without…
A skateboard tool for making perfect wheel wells on any deck in a few minutes. This tool fits on the truck and allows a drill to be connected to the other side. The tool should be ideally about 30mm bigger than the diameter of the wheels.…
The Time Machine - H.G. Wells (Rod Taylor) - 1960 3D printable model.
Please Print in PETG for best results. Files include Version 2 0.5g, 2g, 5g and 10g charge wells. 5g and 10g wells mount with #10 hardware 0.5g and 2g wells mount with #6 hardware Please print at your own risk and remember to test prior…
Please Print in PETG for best results. Files include 0.5g, 2g, 5g and 10g charge wells. 5g and 10g wells mount with #10 hardware 0.5g and 2g wells mount with #6 hardware Please print at your own risk and remember to test prior to flight…
Button Wells with drill hole guide for Gameboy Zero project. Instructions: Super glue in position the button wells by resting against existing A-B button wells. Drill pilot hole (3mm) using guide from reverse side. Recommend to use…
Another type of ''spacer'' used in Hoefer electrophoresis. Print Settings Printer: TRILAB DeltiX Notes: PETG Category: 3D Printing
same as original, no supports brim if you require better adhesion
