Liczymy pasujące modele…
Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for cable management Fits up to 45mm wide headphone bands Screw holes are 40mm apart center to center Max screw width 5mm Max screwhead width 10mm
There are 3 hip options included: Standard width flexible, wide flexible, and wide non-flexible. Shown in the photos is the wide flexible version.
See my improved version 2 here ! ---------------------- Here is a clever, sleek storage solution for a stand mixer’s attachments—each piece is suspended like a kitchen gadget display! All mount neatly under a shelf and ready for action,…
Thank you Paul for the design!
Remixed with the original tray for wider tray body making it easier to catch extrusion when hotend is at left most pos
Snug fit for Delonghi and other 51mm portafilters. .2mm layer height, extra perimeters. Food safe at your own risk.
This Easy Print Piggy Bank is remixed from boniilloo's original as I needed the coin slot to be slightly wider to accomodate Australia's 50c piece, which measures around 32mm at its widest. This likely could have been accomplished by…
Modified the original model with the following changes: Elongated model to support toothpaste tubes up to 60mm wide Added stand to hold tube upright once it's short enough Added “fins” to help to squeeze the toothpaste more gradually for…
The original model did not have centered outlets on either side of the nozzle. I added 1.2mm. My MK4 is from November 2023 and using with improved fan door: https://www.printables.com/model/621424-improved-mk4-fan-door
Biegevorrichtung für Widerstände, Dioden, etc. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Filament: Anycubic PLA green Category: 3D Printing
The original underdesk drawers from Godard Scientific are awesome. One thing however which I needed to change was that the drawes were a bit small - and I wanted to make use of my Prusa XL to get some bigger drawers. So this single drawer…
Keep Your Filament Tidy – Now Stronger Than Ever (V5) An improved, compact, and user-friendly clip designed to secure filament ends on spools—preventing unwinding and tangling. Now in Version 5 , featuring wider mounting. Ideal for…
This is a copy of another I download But noticed the brim wasn't as wide as it could be & the ash was falling all over the place. Also, the centre hole was too small for the cheap incense sticks I was buying. So redesigned it with a wider…
I tried about 5 different version of the Y-splitter but the filament kept snagging on the edges of the entry of the tube. Finally decided to create my own version. This version takes into account the wider 2.5mm inner diameter of the…
Nothing fancy, just a wider version of the original din clip (4mm wider)
I was disappointed to find that the Bambu P1S single filament holder is not long enough to accept some filament spools, in particular some Prusa spools. I didn’t want to screw anything permanently to the printer, so designed a clip on…
Especially when in use with the MMU3 community edition, there is more space to the top. A wider radius on the bowden bend leads to a smoother loading procedure, what enhances reliabilty of material changes Additionally I found it helps a…
The original model of this was designed to support both the Elegoo and Anycubic mini air purifiers. But I always found the Anycubic ones didn't fit properly. They always broke at the bottom when I pushed them all the way in as they should…
It uses 608 zz 8x22x7 bearings. Print on PETG or some material witch can handle heat. 4 walls 4 bottom 4 top 15% infill Little support on back side stand. Brim of 10mm for the Shaft and about 6mm for bottom Spacers. I printed in Garolite…
This is a remix of the Stackable Keycap Storage Tray by SpikedSynapse. I made the trays wider to accomodate a full row of F keys next to eachother, so you can fit 12 units of keys in a row. I also made a taller version available for…
Found the original version from MeltsPlastic to be great, but found that that in order to have them over the Quest Pro speaker slot, they were a little to far forward for me. This left some mids and a fuller sound stage on the table. I…
This is a fix for the V-spooler. The Cam guide stuck and I had no luck with it. But another user on bambulabs had made a wider guide and a larger cam tooth. so I made the files myself and now it works a treat.
Well just a 30mm spacer for the top (print 4) and some caps for the M3 hardware uses 20x M3x40 hex screw. And the feet , print in TPU (print 4)
This is a Low-Poly Spiral/Twist Vase, with a faceted light-reflecting surface, inspired by the Low-poly Rose Twist Vase by Riskable , and made wider to fit more flowers. Looks great in shiny and multi-color filaments, and sparkles when…
A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…
First version was very lightweight, also easy to install. This version more strong and more crush ready. Also some different design v002 and v003 difference only arms holes, v003 much wider to fits more arms variations. This is an…
Based on Fanatec's pedal faces that comes with the Clubsport V3 pedals. Just 25 mm wider on one side. Fits all pedals and can be mounted upside down. I use this on my throttle and brake pedals. Both with the extension on the left side of…
This is a remix of the Prusa Protective Face Shield RC2/RC3 to extend the face shield so that it wraps around closer to the temples to provide more side protection, and adds an integrated top cover similar to the Prusa top cover. I also…
I made this remix of the butterfly comb because I heard that a comb with wider teeth and the teeth further from eachother was better for your hair.
This bin has a reduced wall height so you can still get things in/out of it when another bin or a shelf is mounted directly above. This bin is wider than a normal bin on one side, use the extra space at the end of a Link rail or to fill a…
Update 01/12/2025: QOL Changes und TPU Roller added + LED Mod, if used on NightOwl! UPDATE 05/16/2024: Modded roller_idler and counterpart, its now easiear to print, build-in support removed. To build this, you need: 8x100mm rods (2x)…
All credits to Juan Puchol. Great job! This is a remix of szuszu's wider version. In summary, this version is 1.2mm wider, and instead of screwing into plastic, it features heat-set inserts. Instructions: Insert 2x M3x5x4 heat inserts…
Additionally you'll need: 3 x M3x20 mm screw (or 1 M3x20 mm and 2 M3x16 mm screw for the version with the threaded inserts) 1 x M3x30 mm screw 1 x rubber band
Modified version of @salacious_sloth's excellent wire management tray, with wider gaps between prongs.
Change log: V4 (1/10/24) - Update hinges
One of my power strips was wider than normal on the cable end. This design expands the cable opening to just above 3cm.
Increased the width 1mm overall for a more snug fit. Perfect fit that requires force to remove
For my Bambu (AMS, no Hydra) X1C it is nice to have a spool with a smaller axle diameter. This way 1kg of filament fits on this spool without scratching at the feeders. The spool with the wider border helps Hydra Systems to have more…
I had the problem with approx. 50% of the printouts that the ball bearing could not turn at all / only with difficulty. Even with the Remix from cmyk which increases the tolerances somewhat. (I suspect that it often jams under the ball…
[ UPDATE: August 10, 2022 ] I remodelled the extruder part so that it connects to a drag chain (see here: https://www.printables.com/model/256682-cable-management-with-drag-chain-for-micro-swiss-d [UPDATE: January 29, 2021] I remodelled…
This is another version of Multiuse-Csae. It's longer and wider. On this model, use also a section of 1.75mm filament inside the hinge to connect the lid to the base.
A slightly wider holder to fit the comfort grip pliers like Craftsman, Mastercraft of Kobalt. The original file printed with a slot width of 14.3mm and unfortunately was a very tight fit for my pliers and you could see the bulging on the…
Really like the original model by wbu, but like a lot of other people I have a lot of utensils that are too wide to sit in the slots, and too unstable if I put them in sideways. So I decided to simply remove one of the prongs to turn two…
Great design by Skedmannen3D. Tweaked the slots a bit wider and deeper for my wrenches to fit. Used an M3 x 35 mushroom head screw PLA or PETG 30% infill 0.2 layer height No supports nor brims required. Category: Tool Holders & Boxes
The Beretta 87T has a very narrow grip, and it is hard for anyone with an average or larger hand to get a proper hold on it for correct finger placement on the trigger. To improve my grip, I created custom grips tailored to my hands.…
Printed in PLA with support 0,2 layerheight 0.4 nozzle 15% infill
wider and higher construction. Better hiding buttons and volume wheel.
remix of https://www.prusaprinters.org/prints/146757-spool-holder-with-bearings which is a remix of orginal model https://www.prusaprinters.org/prints/62910-use-m3-screws-spool-holder-for-prusa-mini-flexible both great models! While the…
After receiving feedback from some people on the first version of this mechanical iris that the tolerances were too tight, I have now created an adjusted version of the model. This way, even those with less-than-perfectly calibrated flow…
Remixed to allow for a wider belt (increased belt loophole to 45mm) Print with standard supports (everywhere) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Amazon…
Remix of the reusable spool for the Prusament Refill System with enlarged holes for the Bambu Lab AMS Lite. The new holes have a diameter of 53 mm, as the original 51 mm holes were not large enough for the Bambu Lab AMS Lite, which…
In my journey to upgrade my Ender 5 Plus, I found myself opening and closing the electronics box at the base of the printer a LOT. It quickly became a pain, so I went hunting for a new enclosure for my board… one that was easier to get…
Usb holder for 30 pendrives, 12 sdcard and 10 microsd and a tray. Most of my drives were too wide to fit drives into both rows of USB slots. Added some extra space between the rows. USB slots come out to tight on my printer so I scale it…
This is a very crude remix of giufini drag knife. I was getting some bending so added some extra side support support to strength it in the direction it was bending. This helped, but I also reduced my depth of cut to further assist.
I printed mine with (Prusament Signal White) PETG and 30% infill, except of the shell, which I set to 4 perimeter walls (which makes most of the cup solid). !!! NOTE !!!: The Holder Shell is tapered on one side. This side is meant to be…
v2: Offset the camera slightly inwards to avoid a small collision with the top of the Nebula pad - when utilizing the factory mounting location. v1: Moved bottom of camera mount further away from edge of bed for a wider up close viewing…
The “Pop” model of the Nespresso Vertuo coffee machine comes with a drip tray designed for Nespresso's own “Vertuo Gran Lungo” mugs. To use normal sized mugs you need to remove the drip tray, which is not ideal. I liked Matt Rayner's…
Remix which has a 5mm bottom. (twice the height of the original in total) & wider flaps. 30mm outside width. It feels a lot more solid and doesn't bend. The original flaps felt a bit to small so I enlarged the width from 20.4 to 30mm.…
A wider version of the lid holder created before: https://www.printables.com/model/890592-flashforge-adventurer-5m-ad5m-enclosure-lid-holder/files
Die Abstandshalter von @lansolo81 funktionieren hervorragend. Allerdings steht der der Senkkopf der Spaxschrauben etwas über das Skadisbrett heraus. Der Remix behebt dieses kleine Manko durch ein etwas weiteres und tieferes Senkloch, das…
Adjusted grips at the side to support the GeeekPi Raspberry Pi 4 Case. Allows fixing in a standard electricity cabinet (DIN rail)
Just modified the hander to work with aquariums that have a fixed wide trim at the top. See pictures… It'll need M4 x 16mm screws. The diffuser for the hanger can be downloaded here;…
It is the same great Monopoly Player Tray / Organizer by BuildX but the left tray for the properties cards is wider for the new wider properties cards.
Print flat with support, 100% infill, 5 walls
Bambu P1S/X1C Extended to support up to 3kg spools Original: https://www.printables.com/model/655060
The Air purifier should now sit flush with the body of the X1 Carbon, giving you more space from the bed.
Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame (Speedybee Master 5 V2) but was too tight to rest under the arms…
This filament holder is multifunctional. You can use it for a cardboard spool but also for a small one I hope it will help you I must say that I have not yet tested the nut and pin, but I have tested the spool holder this is especially…
Contoured 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
Most eSun rolls will fit in the AMS. Especially the black rolls However, the clear plastic eSun HIPS rolls are rolled to the brim and therefor interfere with the filament entry in the AMS. A riser doesnt work here, as this only brings it…
I made this little 1x1 Gridfinity module to hold this deburring tool I found on Amazon and its ten extra blades. I based the module itself of the parametric Gridfinity modules Zack Freedman provided on his initial Gridfinity video . I…
A remix of my prior USB receiver attachment with wider holes allowing for a narrower metal loop.
A remix of the neat 1.9" 12mm hex RC rims that use an internal beadlock design to clamp the tire to the rim. Included are only my favorite bead ring as you can reuse the original ones if need be (go check out the original design, it's…
This is a simple remix of Geoff's screw-fit DIN cleats for the Voron 0, extended so that controller boards can be mounted further from the center / closer to the edges of the back panel to make room for a cable duct + Klipper Expander…
I blended the widened hip, knee, and ankle joints of the Maker Faire Robot remix from tuxcat to include the weapons from steveweber314's remix: http://www.thingiverse.com/thing:841695 http://www.thingiverse.com/thing:454960 If you've got…
Mit dem kann man die Wiederstände Biegen damit es beim Löten Schöner aussieht.
TonieWabe +0,4mm - Modulares Regal für Toniebox-Figuren. TonieHive +0,4mm - Modular shelf for Toniebox figures.
This is a wider version of pencil box by @YogiTech. All print parameters are the same, no supports, some bridging. Space on the inside in: Length: 190mm Width: 70mm Height: 19.8mm
Chipp's handle didn't fit the 6U remix ( https://www.printables.com/model/571092-6u-gridfinity-modular-drawer-system ) so I designed this. It's wider and the tabs fit more tightly. Add some CA across the whole handle and it should feel a…
Originals tolerances were too tight when printed with my current .6mm nozzle setup, so I widened the blade area by 2mm (1mm each side). This model is a bit loose (but usable) for RapidEdge serrated utlility blades, but now fits the stock…
I just added some width to the SSD socket as my lead had a plug too large for the original opening.
Increased the size to fit a desk with a thickness of 60mm.
Triple G Workshop's Octopus Chip Clip … just a bit wider. A bit more than 3x. Enjoy!
2nd Remix. Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame but was too tight to rest under the arms so just added…
I liked @pasq's flyswatter model but wanted the head to be a bit wider because my aim sucks. This is a direct replacement for the swatter_TPU file.
Made for https://www.printables.com/cs/model/854712-modern-spiral-planter-with-holes-shorter-and-small
Modified base file to be 6mm wider to better fit heat set inserts. Stretched base case to allow for longer 18650's with bms pcb's on top. Widened internal structure to allow GPS usage. STEP files included for further modifications.
A wider rear wheel tyre for McLaren MCL60 from LEGO SPEED CHAMPIONS SET Best printing: Cut in half, then glue together Optimal for 0.2mm nozzle!
I love to print this model tilted so it has the most strenght in the inside cilinder. Raise the number of shell layers so the whole knob is solid. I uploaded also a «simplifyed» version because the original has too many triangles for what…
I had trouble fitting the eyes and I modified the original STL, creating a wider hole for the eyes to fit. I was printing at 55% and couldn't get the original model to fit properly, in case you're having the same trouble as me feel free…
Complete redesign of chyllds nice spool cradle. Made the opening for the spool way bigger. M3 screws are needed (at least 10mm long, but can be up to 20mm)
A remix of the Sticky Note List Template by Breeki with wider lines to accommodate most pen and pencil tips. I found that the lines on the original model were a little too thin to fit the top of a pen or pencil, so I simply widened the…
Needed a little more coverage than the original escutcheon, and needed scaled to fit a 1/2 inch pipe for a toilet supply. Might need even a little more coverage, old bathroom walls get a little grungy. And jeez, that valve is furry in…
Remix for wider tires (34-64 mm) I modified the original design to accommodate wider tires, such as those on mountain bikes or wider gravel setups. By redesigning the Support_B part, this stand now fits tire widths from 34 mm to 64 mm…
Got a cheap and cheerful mini grease gun from Aliexpress, works great except it kept tipping over and I found it hard to squeeze. Made a wider base for it, as well as finger flanges so that you could hold it like a syringe - makes it…
I loved vidision's little crab guy, but wanted a wider crab with bigger claws. I made the body footprint square, which also allowed for longer claws to be stored in the body. Assemble per original instructions, but store the claws like in…
Simple case for the breakout board based on: https://github.com/dokuhn/openDTU-BreakoutBoard The case needed to be a bid wider than the Thingiverse version, as the version I used has a slightly different size due to the mounting holes The…
Wider bins that works with Patrik Kokinda's cutlery organizer . Two wider versions, one double and one triple width (120mm and 180mm exterior). Uses the original connectors. I added text modifiers in PrusaSlicer before printing, they are…
I love the original but sadly one of my knipex pliers doesn't fit. So I made this wider remix. The original has 38mm inner space, this one 40mm. all credits should go to the original creator!
![Utility Blade Storage Module Gridfinity [v2] 2mm Wider](https://media.printables.com/media/prints/1121250/images/8465419_d308793f-dda7-4cf0-b73c-26b4375bfc2f_ebbd5910-c6e0-4416-851d-cc8fa1a8ba0c/utility-blade-storage-module-gridfinity-v2-2mm-wider-remix.png)
