Liczymy pasujące modele…
This is designed to help prevent spills by adding support to the case as it indexes through the stations. The pins are integrated and should make it easy to replace if something happens. Category: Sport & Outdoors
In the project, there is the scaling necessary for the contraction of the ABS. It has additional support and perimeters. "YOU MUST PLACE THE METAL GUIDE PIN FOR THE SPRING" En el proyecto, esta el escalado necesario para la contraccion…
Replacement part for Dillon XL650 Press. Reinforced with thicker walls. Locking lug for secure installation (insert & rotate to lock). Can be used as a temporary replacement for the genuine Delrin powder bar reset bushing, but probably…
Needed a small home for my XL6009E1 Step-up converter (DC-DC boost) PCB boards. Two parts (case + lid) to print. No support is needed. PCB and lid snap onto the case, no additional tools required. Here is a link to the XL6009E1 boards I…
Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…
Hi ! A small universal snap-on module for the regulator assembly based on the LM2596 Designed not in 'Gangnam style' but in 'prusa I3 MK3' style Cover specialy designed for my 2 projects related to the Prusa I3 MK3…
For ejecting the cases out of the XL750 and XL650, this replaces the ejector spring. I made this to provide clearance for the thrust bearing that I purchased to smooth my press. Uses an M3 set screw to lock in place. There's some…
I designed these holder to be compatible with my casefeeder mount and wall mount. It holds 5 Dillon primer tubes. I print them right side up. More free AzJake projects: https://azjake.com/pages/free-projects Print Settings Printer Brand:…
Case for XL6019 boost and buck converter (input 5-32v, output 1.3-35v 1.5a max). Features: Vents for cooling Strain relief using Zip-tie which also double as the mechanism to hold the board in place Standard version is high enough to add…
Hi This is a case for XL6009 Boost Buck (step up/satep down) Converter like the attached picture. The converters dimensions 25mm x 48mm You can use zip ties to hold the in and out wires. Print Settings Printer Brand: Creality Printer:…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
Dillon XL650 and XL750 clamping toolhead. Requires M3 bolts, recommended at least 20mm long. Version 2: Added 5.2mm wide by 6.4mm deep hold on the underside of the locator to allow for the use of M3 heat-set inserts. McMaster Carr PN:…
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
This bushing is superior to the stock Dillon bushing which I broke. Print this on the flat side without supports as show in the picture. I used 30% infill with PETG and it's pretty solid. The hole needs to be chased out with a 3/16" drill…
Case for LM2596 and XL6009 DC DC converter. For example it is compatible with: LM2596S DC-DC Buck Converter DC 3.5-40V bis 1.25-35V 3A Step Down Spannungswandler Hohe Effizienz Power Supply Module(5Pack) : Amazon.de: Baumarkt and ICQUANZX…
Hello, this is a remix from: https://www.thingiverse.com/thing:1625233 I changed the dimensions a little bit and changed the part to make it easier to print. I also added a locking mechanism so that you don't need a cable tie anymore. I…
Chain Guard to replace the original discontinued part. Works on the following motorcycles: NX250 NX650 XL600R XL600V XRV650 XRV750 Requires 2 m6 bolts and washers.
This tool holder was designed to be simple and compact. It holds all the required allen wrenches for servicing a Dillon XL650 More free AzJake projects: https://azjake.com/pages/free-projects Other designs and files are available at:…
Case for Step Up/ Down Converter XI6009. Only for the red one, which can step up and down (XI6009 Converter)! -No Screws needed, Top parts just clicks in -Hole in the top part for adjusting potentiometer -Screw terminals used from…
Three designs inspired by phucawf's design. As I was unable to make his design work on my XL650, as it does not have a Thrust Bearing, I designed these versions. The main issue I had with phucawf's design was that the case ejector would…
just made the hole on the other side and reduced the pillars that block the board inside, they were too large for my board. to keep it closed you need to use tape. Category: Electronics
Housing for DC-DC XL6019 step-up/step-down adjustable converter Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 100% Notes: The dimensions of the model are optimized for a layer height of 0.2mm!
Info This is case for DC boosters and specially for XL6019 DC booster. For mouting i used M3X5mm screws. Cover have holes for cooling you can mount mini fan for extra cooling but you must modify the model. I uploud project file from…
This part replaces the half moon shaped spacer on the casefeed support tubing. It is slotted to allow the 1/4" factory bolt to be re-used. It allows for multiple accessories and tool holders to be used. More free AzJake projects:…
Needed a drop-down voltage regulator to give me a couple of amps of 12v on my 24v printer to run a 4028 fan. Mount is to add it to the DIN rail on the electronics panel on the back of the printer. It should be a light friction fit. “6mm”…
Find out everything you need to know about the XL6009 housing on my blog: https://nerd-corner.com/diy-powerbank-with-voltage-regulator-and-voltmeter/ https://nerd-corner.com/de/verbesserter-lm2587s-spannungswandler-step-up-modul-dc-dc/
Casing for DC-DC Voltage converter Converters from Amazon: Amazon.co.uk : Youmile XL6019 DC-DC Buck Boost Converter
This tool holder replaces the spacer on the casefeeder tube and is slotted to reuse the exiting bolt. It fits on the upper bolt. It holds all the standard tools included in the Dillon XL650 Bench tool set. It is built to positively index…
A case with a tapered press fit cover and screw mounting for a xl6009 dc-dc boost converter board. Either M3 or #4-40 will self tap into the mounting holes for the board. The lid is a tapered press fit. I didn't include mechanical strain…
Designed to fit Dillon Precision Casefeeders these easily add male picatinny rails up high on your reloading press. They are a great place to hang primer tube holders or tools. More free AzJake projects:…
Here is a rack I made to store Dillon Precision XL650 Station 1 as well as the casefeed arm bushings. Their are locations for all available arm bushings and locators available on 1/2020. All spots are labeled. More free AzJake projects:…
box to fit dc-dc xl4015 buck or xl6009 boost boards screw hole on bottom, wire exits on ends side clips to hold boards slip together holds tight Category: Electronics
Enclosure for a XL6019 DC-DC step up converter. A very simply enclosure with the FreeCad. Use supports on box body. Simple alignment pins hold the board in place. I did not put any screws in as I didnt need or want any on my application.…
Find out everything you need to know about the XL6009 housing on my blog: https://nerd-corner.com/diy-powerbank-with-voltage-regulator-and-voltmeter/ https://nerd-corner.com/de/verbesserter-lm2587s-spannungswandler-step-up-modul-dc-dc/
Compact case for XL6019 step up (DC-DC) convertor.
3"x3" wall bracket that holds a primer system assembly when not in use. It features 2 threaded holes to also store the primer seater assembly. The rack was designed to hold the primer system right side up or upside down depending on your…
Here is a box for a DC boost/step-up (or even a step-down buck-converter) based on the XL6019 circuit that is 50x28mm in size. This has been designed to house the converter and a standard DC jack socket to fit on one end: repurpose those…
Find out everything you need to know about the XL6009 housing on my blog: https://nerd-corner.com/diy-powerbank-with-voltage-regulator-and-voltmeter/
Here is a rack I made to store all my Dillon Precision Casefeed adapters. I mounts to the wall with 2 #8 standard wood screws or drywall screws. More free AzJake projects: https://azjake.com/pages/free-projects Available printed and ready…
This rack measures 2.5" wide and 8" tall. It has threaded holes that are labeled for the 5 common Dillon XL650/XL750 casefeed body bushings. It also has holes for 8 powder funnels. The alignment tool shown also fits. Decapping pins fit in…
Find out everything you need to know about the XL6009 housing on my blog: https://nerd-corner.com/diy-powerbank-with-voltage-regulator-and-voltmeter/ https://nerd-corner.com/de/verbesserter-lm2587s-spannungswandler-step-up-modul-dc-dc/
A compact and organized way to store the 4 most common station locator buttons as well as a spare of each. This is compatible with all of my male picatinny rail mounts. They are labeled 1-4. More free AzJake projects:…
This is an adapter to allow use of the (inexpensive) Lee funnel case collator with the Dillon XL650, and perhaps other Dillon progressive presses. It snaps on the outside of a standard Dillon case feeder tube, and uses a 1/4 x 3" bolt…
This is modeled after a Glock 26 and dimensionally is very close. I printed it with the slide down in HattchBox Black PLA. This one uses a mount that replaces the half moon spacer washer on the casefeed tube and the pistol slides in place…
Upgrade your reloading setup with our sleek and sturdy Station 1 and Case Feed Arm Bushing Holder, designed to fit seamlessly with your Dillon XL650 or XL750 reloading machine parts. This custom-designed and 3D printed wall-mountable…
Improved on my previous design to make it easier to clip onto the DIN rail. Works with the LM2596 step down power supply and the XL6009 boost converter. How I Designed This openSCAD This model was designed with OpenSCAD. Design files…
Replacement of the little thingy that keeps the spacer for the powder measure (if used with a small powder bar) in place. Fusion 360 file is included. Category: Sport & Outdoors
A nice little case for the XL6019 DC boost converter. It caters for a snap-in USB C port and has strain relief for the wires. The lid is friction fit allowing easy access to adjust the voltage when necessary. It also has holes for heat to…
I enlarged the hole for the spring and beveled it as the spring was sticking inside of this parts.
Not my thing but can't recall where I got it from. I've uploaded all the files, if original author has issues with it being posted, please comment. I never printed this because it was too big for my bed at the time, and made the other…
Upgrade your reloading setup with our custom-designed and 3D printed Casefeed Adapter Storage Rack, compatible with the Dillon XL650 and XL750 reloading machines. This compact and efficient storage solution is perfect for keeping your…
Печатайте из PETG,PIA
Both examples hold 5 Dillon XL650 or XL750 Shellplates and are attached to the wall using 2 #8 wood screws or drywall screws. More free AzJake projects: https://azjake.com/pages/free-projects Available printed and ready to use at…
Find out everything you need to know about the Powerbank on my blog: https://nerd-corner.com/diy-powerbank-with-voltage-regulator-and-voltmeter/
A nice little case for the XL6009 DC boost converter. It caters for a snap-in USB C port and has strain relief for the wires. The lid is friction fit allowing easy access to adjust the voltage when necessary. It also has holes for heat to…
EDIT Just realized the piece that holds the tube is bigger than the original, I have an adapter for my use, so plan accordlingly! Remixed from wanousoubi for 45 acp. I scaled it up for 45 acp and took the guesswork out so you don't have…
Edit 1: snap-fit is not good right now, sorry for that. I'll try to learn a better design. Cad files are available for contribution. A screwless case for Raspberry Pi 4 with a buck converter to use 12V fans. The buck converter I used is…
ALL FUTURE MODELS WILL BE SHARED HERE: https://cults3d.com/en/users/antirice/3d-models USE THESE FILES AT YOUR OWN RISK I scanned my Dillon XL650 in both the up and the down positions. I wanted to be able to use these scans as a basis for…
Enclosure for a XL6019 DC-DC step up converter. A very simply enclosure with the FreeCad. Use supports on box body. Simple alignment pins hold the board in place. I did not put any screws in as I didnt need or want any on my application.…
XL6019 Buck Step up converter case for various electronics projects This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or…
Find out everything you need to know about the XL6009 housing on my blog: https://nerd-corner.com/diy-powerbank-with-voltage-regulator-and-voltmeter/
Here is a ring that will slip over the Dillon XL650 & 750 powder measures to label whatever you want to make it easier to remember.
These are tool head holders for wall mounting. I made these as an alternative for the slide in ones. These are easier to print as well. Works with the XL650/750 Tool heads. I made the screw holes to work with the 50lb plastic anchors…
combine with type C input, output 24V
I needed to face mount an XL6009 to up the 5v voltage from a usb-a source to 12v in order to power a fan to cool my laptop. Made this little thing. Photos featuring the 140mm hexagonal fan grill from here :…
Enclosure for a XL6019 DC-DC step up converter. A very simply enclosure with the FreeCad. Use supports on box body. Simple alignment pins hold the board in place. I did not put any screws in as I didnt need or want any on my application.…
XL6019 5A Step Up Board Model This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes…
Gopro Hero 8 Skull Mount for XL6 XL7 XL5 Print Settings Rafts: No Supports: No Category: 3D Printing
This is a remix from AZJAKE who made the orginal. Original here https://www.thingiverse.com/thing:4128450 AZJAKE: https://www.thingiverse.com/AzJake/about I remixed this so I can just have the bushings on the wall only. I keep the powder…
This is a remix from AZJAKE who made the orginal. Original here https://www.thingiverse.com/thing:4080449 AZJAKE: https://www.thingiverse.com/AzJake/about I remixed this so I can just have this on the wall. I also remixed for having all…
Summary This is a remix from AZJAKE who made the orginal. Original here https://www.thingiverse.com/thing:4128435 AZJAKE: https://www.thingiverse.com/AzJake/about I made this to hold every shellplate possible as of March 2020. For…
XL6009e1 buck converter case with terminals remixed from STEP UP DOWN CONVERTER CASE xl6009 by (Create_Tec)
Magnetic Primer Catcher (Spent & Live) for Older Dillon XL650 Keep your reloading press and workspace cleaner and more organized with this magnetic primer catcher system, specifically designed for older-generation Dillon XL650 presses .…
A case with a tapered press fit cover and screw mounting for a xl6009 dc-dc boost converter board. Either M3 or #4-40 will self tap into the mounting holes for the board. The lid is a tapered press fit. I didn't include mechanical strain…
Here is a ring that will slip over the Dillon XL650 & 750 powder measures to label whatever you want to make it easier to remember.
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
