Wyniki wyszukiwania: xpen

Small / inexpensive jewelry gift box

Costs less than 20 cents to print. Looks great printed on an “effects” build plate. Fusion file is mostly parameterized if you want to make changes.

Helldivers 2 Expendable Anti-tank Plaque

A plaque for the Expendable Anti-tank support weapon

GlueStation: A DIY alternative to expensive 3D printer glue, for when you need your print to stick

A general note: Generally, I try to avoid using glue sticks and glue products on 3D prints.. but sometimes you really do want that extra assurance that comes with using an adhesive. In particular this is a welcome helper for many ABS/ASA,…

Byrna Launcher Custom EXPENDABLE Ammo

The Expendables - Barney Ross - 2010

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

The Expendables - Lee Christmas - 2010

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Sixpence Detective Kitty

Looking for a purrfectly charming desk buddy or shelf decoration with a touch of mystery? Meet Detective Kitty – the adorable feline investigator in a classic flat cap, always on the case and eternally curious. Some supports, mostly on…

Fixpencil rotary sharpener

This is an easy to print rotary sharpener that will fit any desk or drawing table. I am using this sharpener with my 2mm Caran d'Ache Fixpencils and my 2mm Kita-Boshi 2mm pencil. My oldest mechanical pencils are over 30 years old. They…

The Expendables - _Trench_ Mauser - 2010

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

The Expendables - Gunner Jensen - 2010

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Choose your weapon: The Expendables

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D BLACK Transmission Distance: 4.6 PLA+ GST3D RED Transmission Distance: 3.5 PLA+ GST3D BLUE Transmission Distance: 3.5 PLA+ GST3D…

Kingroon KP3S inexpensive hotend upgrade

An inexpensive full upgrade of the hotend with less than $20 total cost for Kingroon KP3S 3.0, Pro and S1. It's based on TZ Bambu clone hotend with V6 adapter and BMG clone dual gear extruder, but stock Titan can be used. Remember the BMG…

Quick and inexpensive filament colour chart

+5 tests +Shows relevant material properties +Fast print +Inexpensive little material consumption + 1mm thickness only + Stackable as a colour chart with a simple zip tie Note : I did not insert, at purpose, regular model test as…

EAT-17 Expendable Anti-Tank(HELLDIVERS 2)

one of the best stratagems from the game. takes a 2.5 in tube and a 1/4 in rod. prints in 4 plates of pieces for smaller printers. Category: Costume

Máquina Expendedora 3D para Dioramas y Miniaturas - Vending Machine

Este modelo STL representa una máquina expendedora detallada con elementos realistas: varios estantes para productos, un panel con botones, ranura para monedas y área de exhibición. Su estructura cuenta con geometría limpia, ideal para…

Extremely inexpensive stringing test

This is a very simple, inexpensive, and fast-to-print stringing test. It takes 3-4 minutes to print with a printing speed of 70 mm/s and a travel speed of 175 mm/s. The gab is about 3 cm wide. As a bonus, here are my retraction settings…

Cheap vs Expensive Nozzle Test Parts

There is not much to say, these shapes have 1.2mm walls, so basically designed with a 0.4mm nozzle in mind. The single 0.4mm line on the sharp object is really hard to print, well you can see that from the pictures. I created these basic…

Sixpence Skull

🧠💀 Sixpence Skull – The Gentleman’s Afterlife Look 🧠💀 Why should class and style stop at the grave? Meet the Sixpence Skull , a dashing and dapper cranium sporting a finely curled mustache and a classic sixpence cap. Few supports are…

EAT-700 Expendable Napalm helldivers 2

designed to fit a 3 inch carboard tube in it. handles uses a bit of 1/2 in rod. split for printing, about 6 bed plates. Category: Props

Inexpensive Document Camera for Distance Learning

I needed cheap document cameras for my students. They have laptops, but I had no way of seeing what they were working on. I created this clip-on mirror that turns a laptop camera down. Kids put a whiteboard on their keyboard. With this…

Helldivers 2 Expendable Anti-tank (Non AMS Compatible)

I elevated the areas that need to be white so that you can preform a color change at that layer. Printed well with my Ender 3 V2. With a .2 layer height Black: Layers 1-22 Red: Layers 23-45 White: Layers 46-48

FLUXPEN D=12mm top large Pinecil/TS100/TS80 Case (V2)

Top large input for rugged Pinecil/TS100/TS80 Case (V2) with space for fluxpen diameter 12mm with solderin iron holder space and two spools of tin. Exact fluxpen: Here on TIPA Also should work with everything with diameter 12mm and length…

XPEN stylus holder / Support pour stylet XPEN

EN: A pen holder that can also be used as a pen holder. I use it for my XPEN tablet because I don't have a holder for my pen. Not recommended for PLA but still works. Use PETG or other material instead. FR: Un porte stylet pouvant aussi…

Universal expendable plug

This is a universal expandable stopper designed to fit a wide range of openings. The default model measures 20 mm, but you can easily adapt it to your needs by scaling the print size in your slicer. Simply adjust the dimensions to match…

Expendable Egg holder

modular, A part connects to a B part, then connect an A part again etc.. made to fit in fridges that cannot fit two eggs in front of eachother.

Bambu X1 inexpensive lamp holder

Though the LIDAR flow calibration is a valuable benefit of the X1/X1c, there is a high price to pay for it: The internal lamp is but a weak glim that - combined with the tinted glass door - hardly allows to visually inspect print…

Another MagSafe Phone stand/charger made to use inexpensive Amazon charging units.

I was searching for a phone holder/wireless charger, but so many of them don't hide the USB plug and cable. I made this one to hide as much of it is possible. I have an older Android Note10+ phone without MagSafe, but my friends have…

Car Parts are Expensive wall hanging

...so I sketched it out in Rhino and made a step file. If you print it upside down it will get your platform's surface and you won't need to do ironing. (The image design is not mine , btw, I just made it printable. Original artist is…

SW Legion - Exhaust and Expend tokens

[WIP ] A real simple pair of exhaust and extend tokens.

ring, because normal ones are expensive (probably scalable to finger size)

ITS LITERALLY A RING

Ikea LivBoj holder for XPeng G9 and IPhone SE 2020

The XPeng G9 has one wireless charger. However, during long trips it is convenient to have another wireless charger at hand. This holder can house a IKEA LivBoj wireless charger to charge an Iphone SE 2020. If you want to modify it for…

SolaSim - An Inexpensive, Open Source, Benchtop Solar Simulator

This page includes a single project file (.3MF) containing all of the printed parts needed to build SolarSim - an inexpensive, open-source, benchtop solar simulator for the study of phototaxis - the movement of plants and algae in…

Simple and Inexpensive Azimuth Indicator for Amateur Radio Antennas

The controller for my heavy duty antenna rotator stopped working properly, but the rotator itself has a DC motor and is easily controlled manually with just a DC supply and an inexpensive PWM controller for speed ramp up/down. To…

Flexpen insulin case

Flexpen insulin case (Novorapid, Tresiba)

MEFD Mod (Most Expensive Filament Dryer) for RatRig

Welcome to MEFD It's short for a redicioulus project: Most Expensive Filament Dryer. And I mean it ;-) Recipe What you need to do is… not hold back. Get everything with the most buck for the bang. As a dry box this would be the smallest…

Xpeng G9 Google Pixel buds pro wireless charger

Designet to fit the wireless charging plate of a Xpeng G9, to prevent the Google Pixel buds pro from sliding down. Room for air flow is added. May fit other models. I suggest priting top side up for best end result, support in air canal…

Inexpensive lighting for the Original Prusa Enclosure

Inexpensive lighting for the Original Prusa Enclosure Based on the following display case lighting, available from Amazon: https://www.amazon.de/dp/B096VN7V3F?psc=1&ref=ppx_yo2ov_dt_b_product_details The model includes the necessary…

"Unsafe, Ineffective, Expensive" sign

100x160mm sign. The joke runs, “Fast, Good, Cheap: Pick any 2” … but all too often today we get all 3 of “Unsafe, ineffective, expensive” Mesh and Solid models provided. The solid version might be an easier print. Best with color switch…

XPen (Wacom) tablet Pen stand

It is better to insert some weights (steel balls) into the infill during the print process for better stability.

Drinking cup with expensive shoes

To asemble this get 2 shoes and glue stick shoes whatever your want position

Mounting Bracket for inexpensive Van Interior LED Lights in your camper

Mounting Bracket for inexpensive LED Lights in your camper. I bought my LED lights in Action, however it was poor quality magnets for fitting these to the caper. My design solves the problem.

SETI insert for cards in expension box

I recently got expension to SETI board game. I already had an insert for game pieces but with all aditional cards it no longer fits the base game box. I designed some insert to put all of the game cards inside the expansion box. Cards are…

Improved version of the Expendable Battery Dispenser

Removed material in the bottom to significantly lower print time without affecting the function. Original here: http://www.thingiverse.com/thing:399744 Instructions Print at 100% for AA batteries and scale down to 88% for AAA size. Use…

Retro Fixpencil 77 Button

Designed to fit the classic Caran d'Ache Fixpencil 77, this custom design replacement button keeps the necessary touch of retro flair for this iconic and durable pen from the golden age where robustness was key.

Car Parts are Expensive multilevel wall hanging

Another version of the stripper/car guy wall hanging for the garage, but redesigned for two color printing (via manual filament change ) and with the middle part of the image recessed a little. Print in the orientation shown. When you…

Fluxpen Holder

FluxPen & Marker Holder (Gridfinity-kompatibel) Dieser praktische Halter ist Teil des Gridfinity-Systems und bietet eine elegante Lösung zur Aufbewahrung von Flux-Pens oder Whiteboard-Markern . Die Stifte werden senkrecht positioniert,…

Inexpensive 3mm x 92mm Screwdriver Handle

I did not like the thin handles on the cheap "precision" screwdrivers that you can buy online or that will normally come with 3D printers and other electronic projects. For example, the 3mm x 92mm FOCMKEAS Screwdriver found on the online…

Kontainr - Expendable Storage Box (v1.0)

================================================================================ KONTAINR - EXPENDABLE STORAGE BOX (v1.0) ================================================================================ 🔸Hello! Kontainr is my first-ever…

SETI insert for cards in expension box

I recently got expension to SETI board game. I already had an insert for game pieces but with all aditional cards it no longer fits the base game box. I designed some insert to put all of the game cards inside the expansion box. Cards are…

XPen (Wacom) tablet Pen stand

It is better to insert some weights (steel balls) into the infill during the print process for better stability.

Inexpensive 3mm x 92mm Screwdriver Handle

I did not like the thin handles on the cheap "precision" screwdrivers that you can buy online or that will normally come with 3D printers and other electronic projects. For example, the 3mm x 92mm FOCMKEAS Screwdriver found on the online…

Universal expendable plug

This is a universal expandable stopper designed to fit a wide range of openings. The default model measures 20 mm, but you can easily adapt it to your needs by scaling the print size in your slicer. Simply adjust the dimensions to match…

XPeng P7 Wall Decoration

This is a modern wall decoration made of two colors. infill: 15% layer height: 0.2 wall generator: Arachne If you like my uploaded model, please take a look at my other wo

Downforce + 2 expensions Insert / Organizer Board Game

This is an Downforce Board game insert / organizor + the 2 expensions fit into one box (Wild Ride + Danger Circuit) Print was to big for one go on my Ender 3 v2 so it is split into 4 pieces, I have not glued them togheter or anything…

WaxPen Stand

A compact stand for holding a wax writing pen (pysachok), traditionally used in Ukrainian Easter egg decorating (pysanka). While rooted in Ukrainian folk art, similar wax-resist techniques are also found in other parts of Eastern and…

Xpeng G9 (model 2023) Phone cooler

When wirelessly charging your phone in the XPeng G9 it can get pretty hot. In order to prevent this the new 2024+ models will cool the phone using special air vent at the back of the charge pad. For older models (2023) the heating is…

The Expendables - Barney Ross - 2010

The Expendables - Barney Ross (Sylvester Stallone) - 2010 3D printable model.

The Expendables - Lee Christmas - 2010

The Expendables - Lee Christmas (Jason Statham) - 2010 3D printable model.

The Expendables - Gunner Jensen - 2010

The Expendables - Gunner Jensen (Dolph Lundgren) - 2010 3D printable model.

The Expendables - _Trench_ Mauser - 2010

The Expendables - Trench Mauser (Arnold Schwarzenegger) - 2010 3D printable model.

Car Seat Headrest hook longer version fits xpeng g9

remix with a longer arm

XPENG G6 Headrest Post Adapter for Tablet & Phone Holders

This adapter is designed specifically for the XPENG G6 Facelift (MY25) and mounts securely to the front seat headrest posts. It provides a stable attachment point for compatible tablet and smartphone holders - ideal for back seat…

HexPenHolder

Small nice pen holder with name tag

Xpeng G9 cupholder base & Iphone magsafe holder

A quick mashed together cupholderbase with a hole which fits the other model which is a magsafe stand for the iphone. I made this so I can film the Xpengs screen while driving and record weird behaviour that I can then file as a bug…