Liczymy pasujące modele…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Please read pdf for full instruction. This dragon is very easy to print. In my opinion best size is 120%. I printed with bambulab at a high quality setting and a 0.16 layer. I use the brim for safety, but in the large version it may not…
Summary This chair uses Lamina Emergent Torsion (LET) joints to fold from a single sheet into a full structure. With about an hour to print and a few drops of super glue, you can make a scale model of our full-sized plywood chair! LET…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
A flip-out cover/holder for your Yubikey security key. The model is already oriented the right way and should be printed without supports. The holder was remodeled from scratch and was based off of pfsmorigo 's Yubikey Holder .
Model created by Toshiyuki Ishibashi
This is a model of the newly announced N Vision 74 hydrogen/electric hybrid racecar by Hyundai. The wheels spin, it's full of details and it doesn't need any support material when printing! If you have issues printing any of my designs,…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
There is two versions of this katana. The first (v1) use one 5mm metal rod to solidify the blade, the second (v2) use two 3mm metal rods. There is two versions of the scabbard. The difference is the position of the kurikata (the little…
First attempt at making a 3d printable mask, will probably upload a modified version later… Make sure to scale it to around 1000%, 3ds max measurements troll. The renders aren't using any displacement maps, you will get the shape as is,…
Hyundai car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
Round version of the eye is added Project file added G-code file added
YubiKey 5C NFC Case/Keychain (USB C only) I needed something to protect my YubiKey from random bumps and scratches in my pocket. Printing in different colors to differentiate them. It is intended to use case cap as main holder of the key…
This is an updated version of my Aliens Dropship. This one is scaled to 300mm and fully printable. It is print verified. May 2022 Update Added a complete zip file. The import from Thingiverse left a lot of files out. Please download the…
You can also have access to the multi-material version of Soyuz. Updates 01/01/2024 Updated parts A_LOX_Tank_Grey_x1 and A_System_Bay_White_x1 (Thanks @dimarca) . Description The Soyuz model is a highly detailed 1:200 scale reproduction…
This is design is done by Scott Yu-Jan with OVERWERK. Please check out his video and credit to him for this great design. The difference is this is for iPhone only since I do not have an Apple watch, I have reduced the size for iPhone 12…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
battle city duel disk, no mechanism or electronics yet i will add those in time though update: sorry about the silence on this so far i have been in the process of printing to test the scale and the uploaded parts. the cards are tested…
This 3D model was originally created by Scott Yu-Jan and OVERWERK. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769. This remix of the model was made to fit the iPhone 14 (without…
This model is a remix of: https://www.thingiverse.com/thing:5251321 Scale about 1/10. I did following changes: I fixed the model so it's 3D printable Attempted to turn the model into european version: removed trunk lid handle added dual…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
A simple YuGiOh Deck Box that holds 55 cards(40 standard deck, 15 extra deck) sleeved in Japanese-sized sleeves.
The Yubikey 5 NFC and Yubikey 5C NFC have slightly different dimensions which is why there are two different designs. The Fusion 360 parameters can be adjusted to accommodate other models. The cap fits on the key one direction with a…
Changes: 2023/12/25 - It was reported that some of the stl files were not working, so I have uploaded “stl_fix.zip” containing fixed version of the files "okayu_base_small.stl" and "okayu_leg_right.stl". --- This is a sculpt that I…
Since the clip that comes with Rituals Car perfume is too narrow/small to use on the Hyundai Tucson vent wing, I designed this for the same and it fits pretty well.
Description du modèle 3D TCG Deck Box for Pokémon, One Piece, Lorcana, Yu-Gi-Oh!, and Magic This 3D-printed deck box is perfect for trading card game enthusiasts who play Pokémon, One Piece, Lorcana, Yu-Gi-Oh!, Magic: The Gathering, and…
I wanted to make a nice sleeve for my YubiKey so thats what I did. I measured the key with calipers to get the dimensions. If you want the Yubikey 5C NFC cad model check out my model found here:…
Ausweishalter für Werksausweis, YubiKey und Schlüssel #badgeholder #yubikeyholder #keyholder Drucker: DeltiQ2plus TRILAB Düse: 0,4 mm Layerstärke: 0,2 mm Filament: smartmaterials3D YouTube Video: Making of Version 11: Erhöhung der…
Fits iPhone 13 with case and supports lightning cable charger.
Źródło oznaczyło ten model jako treść 18+.
I created this assistive device to hold treat tubes! If you have any difficulty holding and squeezing the smooth thin tubes of cat treat paste - this device gives a good gripping point and applies even pressure to help you squeeze out…
I downloaded the Yubikey Cover from Kenny but needed to do some adjustments to use it on my USB-C version.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This play-mat is designed for use with or without approved card sleeves. The Extra Deck is set to handle 15 Cards The Main Deck is set to handle 50 Cards The Graveyard is set to handle 40 Cards This is designed for use with the classic…
Can take a main deck of 40 cards, may take a bit more, 15 extra deck cards and 15 side decks cards.
J'invoque le tous puissant dragon blanc aux yeux bleu !!! <(^^)>
This is a model of Final Fantasy 7 Yuffie Kisaragi in simple polygon form. I printed this model at 15% scale. Her ribbons on the back of her head are too thin to be printed so there is a separate model for those. The Ribbons are already…
Tried a couple of other covers and the fit was close but not great. This fits perfectly and requires no supports. Has a retention bump for keeping the key from flipping open in your pocket. if you need the step file to remix, send me a…
This is my version of the Millennium Ring from yu-gi-oh, it's roughly to scale but is made to look good in person and be easier to make. I included a few different ways to print the pieces some are easier than others depending on your…
I first created this model when a friend wanted a Millennium Rod for his cosplay. I saw a few models around but did not like how they went together. I also wanted to add an LED so the eye glowed. I made this model from scratch using…
Voici le dragon ultime aux yeux bleu <(^^)>
I present a full size replica of the pistol from cyberpunk 2077 with a lots of details. It has a detchable magazine attached to magnets All parts should fit in a regular 220x220 mm 3d printer Print Settings Printer Brand: Creality…
With the DOKYU stand and the iPhone Continuity Camera feature, you can now turn your iPhone into a full-fledged document scanner. How does it work? Very simple... :) Just print out the 4 parts of the DOKYU stand, assemble it and put your…
This is a remix of another 3D model, check the original out too. This deck box had its internal dimensions resized to: 62x92x40mm (Width x Height x Depth). This means that it should fit regular and sleeved cards (I use 60x91mm sleeves, it…
Intro This is a simple case/holder/cover for Yubikey 5 series USB A and USB C. Note that the versions do differ: so print USBC for USBC key and not USBA for USBC key! Info It can be printed without supports. I printed it with 0.12 layer…
The model has a 3.5mm diameter hole in his toe, 5mm deep and another hole in the Rock stand 15mm deep, allowing the insertion of a steel rod or 2x10mm long magnets. Print instructions Supports are required to print the model correctly. I…
Based on ISO/IEC 7810 - ID-1 for perfect fit in your credit card wallet. Thickness 4mm.
This is a repair part for your GMT800 front door arm rest clip. The door switch panel clips into it. The originals are prone to breaking with age and then the switch panel flops around. Print in ABS or PETG for heat resistance. Printed…
[UPDATE July 19, 2024]: Added a horizontal version. In my job I have always to carry my company badge and Yubikey around, but I don't like to have them dangling separatly on my lanyard. So I designed a badgeholder, which can safely hold…
The original model by Noahghclark was too tall for me to fit into my tins, as the lip around the top was narrower than the body. I adjusted it to make it shorter and added slots for your thumb to slip in and grab cards easier. Also…
Thank you for printing my models. It means very much to me! Some 3D printed models from this community have put a much-needed smile on my face on some days. So I hope I can make my contribution and delight you with my creations. If you…
I like to use the cardboard sliver boxes for TCG storage, but dont seem to be able to buy the single card width boxes any more These templates allow you to cut out and fold the correct shape from cardboard eg an amazon box. See the photos…
Dark Magician Girl from Yu-Gi-Oh the anime series/ card game
This holder fits an Apple Airtag and a Yubico Yubikey 5C NFC and should fit the most wallets. Print exactly like defined in the 3mf. I recommend to use PLA as you need the holder to bend a little when inserting the Airtag. If you like you…
Never let your yubikey without protection ! Use this cover instead ! This model is designed for Yubikey 5C NFC (the USB-C version). I couldn't find exactly what i was looking for so I decided to create my own model. I printed it in PLA…
Company logo of the fictional company "Weyland-Yutani". Known from the movie "Aliens". For multi-color printing, the filament needs to be changed after each color.
Fits any 80x80x25mm PC fan Visit website for more info
Sun visor clip for a 2010 Hyundai i20. Will probably fit other models but I have no idea. I believe this to be to part number: GETZ 8523505100OM 85235-05100OM Best to print in PETG, ABS or ASA for heat resistance. A car's interior can get…
This item will protect your YubiKey 5C USB-C device. It has nubs to keep the YubiKey in place for storage and won't come out. No supports or brim needed for my successful print. Print with flat bottom on print bed. I went through a few…
I could not find a Hyundai logo of proper quality, so I created one myself using a seemingly official drawing of it that I found on the Internet. I like the result. The logo is intended for use in your projects, so it's not a "thing", but…
A 3D sign of the YuGiOh logo that achieves multicolor through layer height pauses.
Boite de rangement de carte yugioh! le modèle est prévu pour être empilé les un sur les autres. Séparateur inclus. ----------------------- UPDATE 04/04/2025 Rajout d'un cache poussière. /!\ c'est un prototype qui n'a pas était imprimé,…
Capture the stoic presence of a Demon Slayer with this 3D printable STL model of Giyu Tomioka in a Standing Pose. This iconic character figure is perfect for fans looking to add a piece of the popular series to their displays or anime…
I've modified the original Mammotion Luba RTK Antenna Wall Mount to include a hole along the length of the stem, allowing the cable to exit downward. This update provides an alternative solution for cable management, especially if routing…
A remix of the Every iPhone STL & Adjustable f3d File | ScottYu-Jan & OVERWERK model by @Marlfox_1264389 , but this time with only the phone charger portion. Also adjusted the tolerance of the magsafe portion to be a tight interference…
Standalone shell for the YubiKey 5C (NFC) hardware key.
I loved https://www.printables.com/@GerryPB her loom design, but the spacing of the ‘comb’ was too large for my wife's Miyuki Delica 110 bead bracelets. So I designed my own stand and you need to use the peg and key of GerryPB's design.…
I recommend printing my improved version: https://www.printables.com/cs/model/654548-improved-seat-tracks-cover-for-hyundai-tucson-nx4- Layer height: 0,15 mm or lower Supports: yes, organic supports works great You'll need to print two…
This piece works on 2009-14 Kia Sorento, but has been reported to possibly work with 2015 and 16. May work on Hyundai Santa Fe 2014-15. I clipped off the raised center of the vane it fits on. The clips with the tab down and on the right…
Lets face it, as the wireless charger is crap in the Ioniq 5 I modeld / remixed an magsafe mount for the bottleholder middle console. Here a small video about its fit, I think I will use some velcro to secure it a bit more I use the Anker…
Designed for 200x200mm Printbed, Scale to 150% for 300x300mm. Print in Translucent PETG and add some LEDs for use as a lamp.
Jdsfighter model gave us a great baseline design, but in the Australian version of the IONIQ5, the height of the rear part of the tray meant the cover wouldn't close. So we slightly tapered the design and also adding a few more…
What's it for? When you need it, simply remove the YubiKey from its sleeve, where it rests locked in place securely using a flexture-based catch and snap it back in place with a satisfying click once you're done. Why two halves? The model…
Adjustment of the storage for the Apple Watch/AirPods charger. Úprava uložení nabíječky pro Apple Watch/AirPods
If you are tired of hearing the front wheel lift all the time. Take out the front wheel with 3 bolts and put this 3D model on the axle so it can't slip out. It will work flawlessly!
Yubikey cover with a latch to keep it in place without relying on friction only. Printed at 0.2 mm layer height using PLA, no supports. When inserting a Yubikey make sure to NOT push to hard on the latch, which should only move tiny bit…
Come support these models over on Patreon Buy my time, Not my models. Easy to print Zis Katyusha truck, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. The small pipe in the…
Small remix of rear seat cupholders for 2015-2020 GMC Yukon/Chevrolet Tahoe, I added a GMC, Denali, and logo-less version. Enjoy! (Better pictures coming soon) Print Settings: eSun Black PLA+ filament 210/65 C 0.20 mm layer height Leave a…
Combined both the top and bottom and added a cut on the other side of the lever, so this can be printed in one part. Added an expanded area for the thumb to be able to slide out the USB side more easily. Print with no supports in the…
Very simple, its a credit card sized piece of plastic, with a cutout for a Yubikey 5C NFC. I printed my example out of Orange Microcenter ASA with a .1mm layer height, 6 permieters, and 20% infill, on my Creality K1.
Welcome to Yucatán! The Ancient Ruins Collection - Mesoamerica is a dedicated subcollection to the legacy of past civilizations in parts of what is present-day Mexico and Central America. This model was designed by Dany Sánchez . The…
This is a Hyundai Ioniq 5, a very cool looking car, I have made it 3d printable just for you. Happy Printing! Link to original model: Hyundai Ioniq 5 - Lowpoly - Download Free 3D model by andikapratamaw (@andikapratamaw) [675e783]…
The YubiKey 5C is a great two-factor security key. It's very small & compact and perfect for modern laptops & most smartphones. It can be attached to a key ring with your other keys so you always have it at hand. However, the bare usb-c…
Hyundai rim cap for your rims. Print in multiple colors to show logo
Here are models of Tenma Helmets from TV series Gosei Sentai Dairanger. Print instructions Category: 3D Printer Accessories
Newly added print in place slide ejector for the yubikey, making it easier to take out. Make sure your first layer is dialed in, otherwise the two pieces might fuse together.
Here is a big card box for all your trading cards - like Yu-Gi-Oh! or other cards as well… The box comes with a big Yu-Gi-Oh! Logo on the front and two Millennium Rings at the sides. It opens easy and holds safe up to 300 cards. There are…
Obelisk The Tormentor from Yu-Gi-Oh
An editable Yubikey holder. 3D Render: https://collaborate.shapr3d.com/v/9ep5VZ-zgFJwerQf3cj7l This is based on the idea of this design https://www.thingiverse.com/thing:5156027/files
