Skate Bushings - Short Barrel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skate Longboard Bushings - Short Barrel
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 1
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Skateboard Longboard Bushings - Short Barrel
- Material: TPU (Shore A)
- Height：15.24mm/0.60in
- Diameter：24.638mm/0.97in
- Hole Size: 9.14mm/0.36in
Are these safe for using on a skateboard?
Probably not. It will depend mostly on the material used and your printer quality. Skateboard bushing are mold injected with Shore A polyurethane which is different from TPU Shore A. I do not recommend using printed parts on a skateboard on high speeds.
What are the benefits of using it?
These bushings will help designers developing metal skateboard trucks using accurate bushings measurements used by the industry.
Can I use these bushings instead of metal spacers or springs for bed leveling?
Yes, absolutely! Just make sure you are using a good quality material. Most TPUs will print at a temperature between 220°C and 250°C. Make sure you are not heating them over 80°C under your printer bed.
Compatibility List:
- Creality CR-10
- Creality CR-10S
- Creality Ender-3 PRO
- Creality Ender-3 S1
- Creality K1
- Kingroon KP3S Pro V2
(Please report with pictures and comments if this worked for another printer not listed above).