Skate Bushings - Short Barrel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skate Longboard Bushings - Short Barrel
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Skateboard Longboard Bushings - Short Barrel
- Material: TPU (Shore A)
- Height：15.24mm/0.60in
- Diameter：24.638mm/0.97in
- Hole Size: 9.14mm/0.36in
Are these safe for using on a skateboard?
Probably not. It will depend mostly on the material used and your printer quality. Skateboard bushing are mold injected with Shore A polyurethane which is different from TPU Shore A. I do not recommend using printed parts on a skateboard on high speeds.
What are the benefits of using it?
These bushings will help designers developing metal skateboard trucks using accurate bushings measurements used by the industry.
Can I use these bushings instead of metal spacers or springs for bed leveling?
Yes, absolutely! Just make sure you are using a good quality material. Most TPUs will print at a temperature between 220°C and 250°C. Make sure you are not heating them over 80°C under your printer bed.
Compatibility List:
- Creality CR-10
- Creality CR-10S
- Creality Ender-3 PRO
- Creality Ender-3 S1
- Creality K1
- Kingroon KP3S Pro V2
(Please report with pictures and comments if this worked for another printer not listed above).