Horizontal BTT SKR Mini E3 Corner Case for 2020 Extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Horizontal BTT SKR Mini E3 Corner Case for 2020 Extrusion
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I wanted a horizontal mount for the SKR Mini E3 V2 to act as a secondary MCU for Tronxy X5SA Pro build. It needed to be in the front right side so it could be hooked to a display.
Printed in PLA using Voron print specifications. Supports may be required depending on your part cooling.
Parts:
-4 to 5 M3 screws length 8-16mm to mount motherboard to bottom
-4 x M3x25mm screws through top into bottom
-4 x M3 nuts/locknuts for bottom
-4 to 5 x M5x10mm for tabs
-4 to 5 x hammer nut or equivalent for 2020
Optional Parts:
-40mm fan grill
**Please note that the 40mm fan will either mount to the top or the bottom with 2 screws. The top and bottom will then close the gap.
**I used the BTT SKR Mini E3 V2, but the V2 and V3 are supposed to have same layout. I have not been able to confirm it with this model.
**This could be used vertically depending on use case.