4xAAA Battery Holder with Integrated Spring (narrow version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is inspired by https://www.thingiverse.com/thing:456900. It is made to be 7.4 mm narrower than the…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 58
- Makes
- 1
- Views
- 600
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This model is inspired by https://www.thingiverse.com/thing:456900. It is made to be 7.4 mm narrower than the original, saving precious space in your models.
That is achieved by thinning the walls between the batteries down to 1 mm (rather than the original 3.5 mm). Therefore, the springs had to be completely remodeled.
It also has only 4 M2 mm screw holes and additional cable management holes at the anodes side.
Recommended Extrusion Width: 0.56 mm
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.20
Infill:
15%
Notes:
Extrusion Width: 0.56 mm
Material: PET or ABS
Post-Printing
Use thin wires (up to 1.3 mm in diameter) to connect the cathodes and anodes of the adjacent batteries, using the integrated cable management ridges and holes. Make a few loops around each contact, rather than welding, because you have to be really skillful not to melt the plastic in the process.
Category: Electronics