Radius gauges / templates
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.19 – €3.89 net (excluding VAT)
For file: radius_templates_0.2mm_PETG_MK3S_3h44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.54 excluding VAT (range midpoint).
- Weight reported by the author
- 43 g
- Print time reported by the author
- 3.74 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Radius gauges / templates allowing you to measure the inner and outer radius of objects
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 208
- Makes
- 0
- Views
- 976
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Radius templates for measuring the radius of various objects. The templates have both an inner and outer radius. There is a step of 2 millimeters between templates. It's fairly easy to figure out if an object has a radius between two templates by finding two that almost fit meaning the radius is between those two.
The templates can measure an objects inner radius from 70mm to 2mm. The templates can measure an objects outer radius from 60mm to 2mm.
The smaller templates aren't very useful though as they get very finnicky to use. But I've included them anyway.
Printing instructions:
- Print at 0.2mm layer height
- Printing in PETG or PLA recommended