Barrel Cap (for 16mm barrel) - Silencer Style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Barrel cap in silencer style for those who don't want a scar barrel but don't like bare aluminum barrels.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 56
- Makes
- 1
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Barrel Cap (for 16mm barrel) - Silencer Style
Barrel cap in silencer style for those who don't want a scar barrel but don't like bare aluminum barrels on their blasters.
I shortened the simple-silly-scar-redesign.
The internal rifling lines were removed and the barrel cap was widened so that a 16mm aluminum barrel can be pushed through to the top.
As with the Silly SCAR, an O-ring is pushed over the barrel to seal or fix it.
All versions of the nuts from the Silly SCAR also work with this barrel cap.
The files for the nuts can be downloaded here.
- UPDATE 12/30/2024:
Added a barrel cap version where the aluminum barrel is not pushed all the way to the front (in case the barrel is too short to reach the front for example).
This barrel cap extends the barrel slightly by about 29mm with a faux barrel with a diameter of 14.5mm.
My print settings for PLA:
0,2mm layer height
5 walls
20% gyroid infill
at least 5 top and bottom shell layers
no supports
Thanks to Sillybutts and dysclarity for the files that I could use for this remix.