1 / 2
Ender 3 V3 SE/KE mobile filament runout sensor mount — image 1
1 / 2

Ender 3 V3 SE/KE mobile filament runout sensor mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adds a bit of mobility to an otherwise stationary sensor

Rating
5 / 5
Likes
26
Downloads
235
Makes
1
Views
1,527
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike
Note: Use the V2 printer clip. I realized that the filament sensor going down was limiting the printer's ability to print above Z200, as such I've essentially flipped the mount so now the sensor sits above the gantry cap.


I forgot print in place parts exist, but this snaps in fairly well so yeah.

You will need some sort of lubricant, I used dry PTFE, and it's moving really smoothly. You could iron the top surface of the sensor mount in order to smooth out the top surface that's going to be rubbing against the stationary mount.

To mount the sensor in place, you can use either of the two models supplied. One is designed for the screw to go directly into the plastic with a 0.2mm tolerance, one designed to use M3 4.2x3mm threaded inserts.

Tags