1 / 3
Skalar San++ Pump Deck Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scientific equipment replacement part:This is a Replacement part for Skalar San++ Per-pump deck handle. Skalar…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution
Scientific equipment replacement part:
This is a Replacement part for Skalar San++ Per-pump deck handle.
Skalar analyser product page: https://www.skalar.com/analyzers/automated-wet-chemistry-analyzers#samplers
I found the over sized springs on the pump deck allow the handle to break when allowed to drop into position. If the plastic cracks or breaks this is a great replacement option.
Print settings:
- Print with high wall lines counts (5+) for strength
- Print is very strong and equal to or greater than the original part when printed with eSun PLA+ using 0.8 mm nozzle.
- Print with the side of handle facing down to bed, this allows supports to fill hole for center pin.
- Dig out the supports at the end.
- This printing orientation allows for highest strength in the required dimensions.
If you like this design, you can say thanks by buying me a coffee via Paypal: